Lackmond CW1143751 Walk-Behind Cured Concrete Blades – Standard – 14″ Diameter; 0.375″ Width; 1″ Bore
- Designed to work specifically with soff-cutt system, the only ture patented ultra early entry system. Unique triangular shaped safety arbor fits precisely on saw’s arbor. Ridgid 7 in continuous diamond blade.
Husqvarna 542756121 XL55-3000A, Excel 3000 Series, Ultra Early Entry Concrete Blade, 5-1/2-Inch, Red
- The husqvarna excel 3000 series red is recommended specifically for medium to hard aggregate, medium abrasive sand. Color coded patented diamond blades designed and tested to meet all aggregate conditions. A patented anti-ravel skid plate comes with every blade to allow for same day cutting without chipping or spalling on newly finished concrete.
5QTY 14″ DIAMOND SAW BLADE CONCRETE BRICK BLOCK STONE ROCK MASONRY 10MM Segments
- A heat treated steel core provides extreme blade strength for a deep cut. 395″/10mm. This general purpose segmented blade is for fast cutting at a low initial cost on a wide variety of materials. Includes 20mm heavy duty bushing. Ideal for cutting concrete, brick, light weight block, pavers, field stone, and masonry materials either wet of dry. General purpose premium segmented 14 inch diamond blade with 10 mm segment height. Can be used on high speed angle grinders, circular saws, masonry saws and gas cut-off saws. Secifications segment height. Use dry or wet. For light or medium duty cutters. 125″x. The 14″ blades have been treated with laser welds on both sides of the segments to add strength for better cutting speed and longer blade life. 395″(10mm) arbor 1″ size 14″x.
MK Diamond 159615 CX-10 Extreme 12-Inch Wet Cutting Diamond Segmented Saw Blade with 1-Inch Arbor for Cured Concrete
- For wet or dry cutting. Mk diamond 159615 cx-10 12 by. This blade is for cutting cured concrete. Blade segments are laser welded to steel core. 100 by 1 inch is a premium grade blade with a segmented rim. .
USA Made 14 Inch Diamond Concrete/Masonry Blade, Laser Welded Diamond Segments, 1″/20mm Arbor. 12mm Segment Height. General Purpose Blade For Cured Concrete, Masonry, and Stone. Wet/Dry Cut.
- Manufactured in irvine, california. Designed for cutting hard materials such as cured concrete with rebar and masonry applications. Laser welded segments withstand higher heat from demanding applications. Tall segments for longer life. Wet/dry cutting for use in demolition saws or walk behinds.
Husqvarna 510401601 XL14S38-3000, Excel 3000 Series, Ultra Early Entry Concrete Blade, 13-1/2-Inch, Red
- . A patented anti-ravel skid plate comes with every blade to allow for same day cutting without chipping or spalling on newly finished concrete. The husqvarna excel 3000 series red is recommended specifically for medium to hard aggregate, medium abrasive sand. Color coded patented diamond blades designed and tested to meet all aggregate conditions.
Mercer Industries 663120 Segmented Diamond Blade for Asphalt and Green Concrete, 12-Inch
- High diamond concentration, allows the blade to last longer and increase efficiency. Tensioned and balanced, no wobble when using blade. Hot pressed technology. Special bond construction. No wobble while using blade. 12-inchx125x1-inch, 20mm dph, 10mm rim. High diamond concentration. Steel core with proprietary diamond bond. Tensioned and balanced. Lasts 100x longer than an abrasive blade.
Husqvarna 542758471 F830C Cured Concrete Blade, 18-Inch by 0.125-Inch by 1-Inch
- 375-inch diamond depth. The husqvarna f830c professional cured concrete blade is perfect for cutting medium steel reinforced limestone to granite concrete. Husqvarna blades are developed for the highest possible performance, cutting speed and product life. Narrow notched blades 24-inches in diameter or larger have recessed segment undercut protection. . Total segment height is. 450-inch (. Many size options available. 075-inch segment base).
18″ Patriot Diamond Blade – Super Professional Cured Concrete Blade
- For cutting cured concrete with rebar. Dry or wet. Made in the usa, suitable for all saws up to 65hp. 18″ x 125 super professional quality diamond blade. Medium hard aggregate to hard aggregate.
MK Diamond 162838 MK-699D Dry Cutting Concrete and Asphalt Blade, 16″ x .125″ x 1″
- The mk-699d features full radius core protection every six segments with wedge segments that provide excellent undercut protection. Mk-699d premium grade for asphalt and green concrete blade is a premium grade blade used for cutting asphalt and green concrete. .
KHK SMP08090 Premium 8-Inch Multi-Purpose Wet/Dry Segmented Diamond Blade with 5/8″-7/8″ Arbor for Concrete, Brick, Stone
- Contractor-quality blade with optimized bond technology for faster-cutting and longer life. Great for cutting concrete, block, brick, marble, granite, natural stone, pavers, etc. Premium-grade, multi-purpose 8″ segmented diamond blade. 5/8″-7/8″ diamond knockout arbor, 0090″ edge thickness, 75mm segment height. Cuts wet or dry, up to 7,600 rpm maximum.
KHK SUGP14125 Supreme 14-Inch General-Purpose Wet/Dry Segmented Diamond Blade with 1″-20mm Inch Arbor for Concrete (Cured & Green), Brick, Stone, Asphalt
- Supreme-grade, general-purpose 14″ segmented diamond blade. Great for cutting concrete (cured & green), brick, block, marble, granite, stone, asphalt, etc. Cuts wet or dry, up to 5,460 rpm maximum. 1″-20mm knockout arbor, 0125″ edge thickness, 13mm segment height. Contractor-quality blade with laser-welded bond technology for longest possible blade life.
MK Diamond 159616 MK-CX-10 14-Inch Wet Cutting Segmented Saw Blade with 1-Inch Arbor for Cured Concrete
- This blade is for cutting cured concrete. Blade segments are laser welded to steel core. For wet or dry cutting. 125 by 1 inch is a premium grade blade with a segmented rim. Mk diamond 159616 cx-10 14 by. .
10 QTY 14″ DIAMOND SAW BLADE CONCRETE BRICK BLOCK STONE ROCK MASONRY 10MM Segment
- 125″ thick segments. 5400 maximum rpm. 14″ diameter (35660mm). 10mm segment height. Wet or dry use.
Rapid Roof Remover RB004 Hardwood Removal from Concrete Blade with Support Bar, 4″
- 4″ blade specifically for hardwood removal from concrete. Tear-off blade will remove most of the fasteners reduce prep time for resurfacing. Includes support bar.
iCut Supreme Turbo Diamond Blade 10mm High Segment All Purpose for Concrete Block Brick Pavers (10 Inch)
- Fast shipping & great customer service. Diameter 4″, 45″, 5″, 6″, 7″, 8″, 9″ & 10″ | arbors 5/8″-7/8″ & 5/8″-7/8″ dko | width 0080 & 0095. Cutting method wet or dry. Segment height 10mm | slant turbo segment design for effective slurry removal & cooler running core during masonry applications. Icuttm 10mm high turbo segment multi purpose diamond blade, sintered.
Husqvarna 542756176PV14S14-2000, Excel 2000 Series, Paver Blade, Ultra Early Entry Concrete Blade, 14-Inch, Green
- A patented anti-ravel skid plate comes with every blade to allow for same day cutting without chipping or spalling on newly finished concrete. The husqvarna excel 2000 series green is recommended specifically for hard aggregate, non-abrasive sand. Color coded patented diamond blades designed and tested to meet all aggregate conditions.
Husqvarna 542777006 XL6-2000, Excel 2000 Series, Ultra Early Entry Concrete Blade, 6-Inch, Green
- Color coded patented diamond blades designed and tested to meet all aggregate conditions. . The husqvarna excel 2000 series green is recommended specifically for hard aggregate, non-abrasive sand. A patented anti-ravel skid plate comes with every blade to allow for same day cutting without chipping or spalling on newly finished concrete.
Husqvarna 542756102 XL10-3000, Excel 3000 Series, Ultra Early Entry Concrete Blade, 10-Inch, Red
- . The husqvarna excel 3000 series red is recommended specifically for medium to hard aggregate, medium abrasive sand. Color coded patented diamond blades designed and tested to meet all aggregate conditions. A patented anti-ravel skid plate comes with every blade to allow for same day cutting without chipping or spalling on newly finished concrete.
MK Diamond 159686 DX-10 14-Inch Premium Cured Concrete Blade
- 1-inch arbor and 0125-width. Consistently deliver high performance. Dx-10 premium cured concrete blade works very well with mk diamond 159346 cx-3 walk behind saw. For dry cutting. 10-millimeter diamond segments for long cutting life. Blade is laser welded. Laser welded. 14 by 125 by 1 inch. Premium grade cutting blade for cutting cured concrete. Dx-10 premium cured concrete blade is excellent working with cured concrete.
20 QTY 14″ DIAMOND SAW BLADE CONCRETE BRICK BLOCK STONE ROCK MASONRY 10MM Segment
- 125″ thick segments. Wet or dry use. 5400 maximum rpm. 14″ diameter (35660mm). 10mm segment height.
Dixie Diamond Manufacturing DSLP1818125 Cured Concrete Blade Premium Grade for Dry/Wet Cutting, 18-Inch X 0.125-Inch X 1-Inch
- Premium series for dry/wet cutting. It can also be made of natural stone, ceramic or glass. Tiles can be made of porcelain.
GilaTools 18″ Heavy Duty Hard Concrete / Hard Aggregates Walk Behind Saw Blade
- Cutting method dry or wet. Engineered from high quality military grade hardened steel to provide 100x longer use than other conventional diamond blades. Segment height 12mm the concentrated bonded diamond matrix makes this blade the most preferred in the industry for accurate and smooth precision cuts. Arbor/bore size 1 inch, 20mm heat treated steel core that provides extreme blade strength for deep cutting with minimal vibration. Application concrete, reinforced concrete, brick, block, natural stone and hard aggregates.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
