Best Stainless Steel Eye Bolt out of top 19

 

Stainless Steel Shoulder Eye Bolts - Type 316 - 14 x 1-916 L #ad

Stainless Steel Shoulder Eye Bolts – Type 316 – 1/4″ x 1-9/16″ L

Stainless Steel Shoulder Eye Bolts – Type 316 – 1/4″ x 1-9/16″ L #ad - Working load limit 400 lbs. Made of type 316 stainless steel. Bolt width = 1/4″ shaft length = 1-9/16″ hole diameter = 9/16″. Wll shown is for in line pull pulling at an angle reduces the rated capacity significantly. Used on boats or docks as a tie down loop, since they have great corrosion and oxidation resistance.

 

The Hillman Group The Hillman Group 4289 14-20 x 3 In Stainless Steel Eye Bolts with Nut 5-Pack #ad

The Hillman Group The Hillman Group 4289 1/4-20 x 3 In. Stainless Steel Eye Bolts with Nut (5-Pack)

The Hillman Group The Hillman Group 4289 1/4-20 x 3 In. Stainless Steel Eye Bolts with Nut (5-Pack) #ad - The advantage of an eye bolt is that it allows things to hang from it and takes little time to install. Stainless steel is rust and water resistant for marine, bath and outdoor applications does not stain or corrode as easily as ordinary steel. Comes with matching nut.

 

Stainless Steel Type 316 - Machine Eye Bolt - 12 x 78 #ad

Stainless Steel Type 316 – Machine Eye Bolt – 1/2″ x 7/8″

Stainless Steel Type 316 – Machine Eye Bolt – 1/2″ x 7/8″ #ad - Please note loading at an angle will significantly reduce a bolt’s rated capacity. These eye bolts are made from type 316 stainless steel for corrosion resistance. Machines eye bolts are useful for lightweight rigging applications. Bolt diameter=1/2″, ring height=2″, hole diameter=1-1/4″, ring base width=1″, shaft length=7/8″.

 

38 x 3 - Eye Bolts - Stainless Steel Type 316 - Non Welded #ad

3/8″ x 3 – Eye Bolts – Stainless Steel Type 316 – Non Welded

3/8″ x 3 – Eye Bolts – Stainless Steel Type 316 – Non Welded #ad - When using eyebolts without shoulders, the load should always be directly in line with the fastener. Bolt width = 3/8″ shaft length = 3″ thread length = 1-1/2″ ring hole diameter = 3/4″. Used to attach wire rope or lifting slings to objects. These eye bolts are formed and non welded for a lighter duty and inexpensive anchor point. Made of type 316 stainless steel.

 

Uxcell M6 x 25mm Stainless Steel Machinery Shoulder Lifting Eye Bolt 5 Piece #ad

Uxcell M6 x 25mm Stainless Steel Machinery Shoulder Lifting Eye Bolt, 5 Piece

Uxcell M6 x 25mm Stainless Steel Machinery Shoulder Lifting Eye Bolt, 5 Piece #ad - Inside eye dia 5mm / 0 2″ loop thickness 6mm / 0 3″ overall length 35mm 1 4″. Thread dia 6mm / 1/4″ thread length 25mm / 1″ outside eye dia 12mm / 1 28″. Net weight 38g package content 5 x eye bolt. Product name eye bolt type plain pattern (no shoulder) standard size m6. Working load limit 0 23ton / 500lbs material 304 stainless steel color silver tone.

 

Yasorn 5-pack M8 Ring Eye Bolt Stainless Steel Screw Bolt #ad

Yasorn 5-pack M8 Ring Eye Bolt Stainless Steel Screw Bolt

Yasorn 5-pack M8 Ring Eye Bolt Stainless Steel Screw Bolt #ad - 79inch package including 5 m8 ring eye bolt. 5mm/0. 20mm/0. 89inch screw diameter approx. 7. 48mm/1. Main features ring shape screw type high quality of stainless steel 304 ring inner diameter is approx. 20mm/0. 79inch good quality, anti-rust and more durable specification weight approx 225g color silver material stainless steel 304 height approx. 3inch ring inner diameter approx.

 

Welded Stainless Steel Eye Bolt T316 - 12 x 4 #ad

Welded Stainless Steel Eye Bolt T316 – 1/2″ x 4″

Welded Stainless Steel Eye Bolt T316 – 1/2″ x 4″ #ad - Often used to attach wire rope or other rigging hardware to a surface or object. Bolt diameter = 1/2″ shaft length = 4″ eye diameter = 15/16″. These eye bolts are formed and welded for a heavy duty anchor point. Constructed from marine grade type 316 stainless steel. Ideal for marine applications or other harsh environments.

 

Stainless Steel Shoulder Eye Bolts - Type 316 - 12 x 4 L #ad

Stainless Steel Shoulder Eye Bolts – Type 316 – 1/2″ x 4″ L

Stainless Steel Shoulder Eye Bolts – Type 316 – 1/2″ x 4″ L #ad - Bolt width = 1/2″ shaft length = 4″ hole diameter = 1-5/32″. Made of type 316 stainless steel. Used on boats or docks as a tie down loop, since they have great corrosion and oxidation resistance. Wll shown is for in line pull pulling at an angle reduces the rated capacity significantly. Working load limit 2,000 lbs.

 

516 x 4 L Shoulder Eye Bolts - Stainless Steel Type 316 #ad

5/16″ x 4″ L Shoulder Eye Bolts – Stainless Steel Type 316

5/16″ x 4″ L Shoulder Eye Bolts – Stainless Steel Type 316 #ad - Working load limit 800 lbs. Made of type 316 stainless steel. Bolt width = 5/16″ shaft length = 4″ hole diameter = 3/4″. Used on boats or docks as a tie down loop, since they have great corrosion and oxidation resistance. Wll shown is for in line pull pulling at an angle reduces the rated capacity significantly.

 

316 Stainless Steel Eyebolt Not For Lifting 4 Length Threads Imported #ad

316 Stainless Steel Eyebolt, Not For Lifting, 4″ Length, Threads, Imported

316 Stainless Steel Eyebolt, Not For Lifting, 4″ Length, Threads, Imported #ad - Loads should always be applied to lifting eyes in the plane of the eye, not at some angle to this plane. . 3440 pounds working load limit. Rated capacity is drastically reduced when loading at any angle. Loading must never be made at an angle greater than 45 degree from bolt centerline. Indusco drop forged stainless steel 316 shoulder eyebolt furnished with standard hex nuts. At any angle of 45 degree, rated capacity is reduced to 1/4 of the tabulated value. Shoulder lifting eyes must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. 2-inches thread length. Shank measures 5/8-inches diameter by 4-inches length. A steel washer or spacer may be required for proper seating. Working load limit is based on a design factor of 51.

 

The Hillman Group The Hillman Group 4283 10-24 x 2 In Stainless Steel Eye Bolts with Nut 10-Pack #ad

The Hillman Group The Hillman Group 4283 10-24 x 2 In. Stainless Steel Eye Bolts with Nut (10-Pack)

The Hillman Group The Hillman Group 4283 10-24 x 2 In. Stainless Steel Eye Bolts with Nut (10-Pack) #ad - The advantage of an eye bolt is that it allows things to hang from it and takes little time to install. Comes with matching nut. Stainless steel is rust and water resistant for marine, bath and outdoor applications does not stain or corrode as easily as ordinary steel.

 

Stainless Steel Eye Bolt M8 x 32mm 3 pcs Eyebolt #ad

Stainless Steel Eye Bolt M8 x 32mm 3 pcs. Eyebolt

Stainless Steel Eye Bolt M8 x 32mm 3 pcs. Eyebolt #ad - Die-cut threads for less chance of binding. Stainless steel won’t tarnish or rust. Ideal for hanging speakers in houses of worship, restaurants, bars, clubs, etc. Built-in shoulder requires no washer for installation. Popular sizes and lengths for pa speakers.

 

Stainless Steel Eye Bolt M10 x 35mm 3 pcs Eyebolt #ad

Stainless Steel Eye Bolt M10 x 35mm 3 pcs. Eyebolt

Stainless Steel Eye Bolt M10 x 35mm 3 pcs. Eyebolt #ad - Die-cut threads for less chance of binding. Built-in shoulder requires no washer for installation. Popular sizes and lengths for pa speakers. Stainless steel won’t tarnish or rust. Ideal for hanging speakers in houses of worship, restaurants, bars, clubs, etc.

 

Stainless Steel Shoulder Eye Bolts - Type 316 - 38 x 4 L #ad

Stainless Steel Shoulder Eye Bolts – Type 316 – 3/8″ x 4″ L

Stainless Steel Shoulder Eye Bolts – Type 316 – 3/8″ x 4″ L #ad - Working load limit 1,000 lbs. Wll shown is for in line pull pulling at an angle reduces the rated capacity significantly. Bolt width = 3/8″ shaft length = 4″ hole diameter = 1″. Made of type 316 stainless steel. Used on boats or docks as a tie down loop, since they have great corrosion and oxidation resistance.

 

Lehigh 14-20 x 2-58-inch Stainless Steel Eyebolt with Nut 10-Pack #ad

Lehigh 1/4-20 x 2-5/8-inch Stainless Steel Eyebolt with Nut 10-Pack

Lehigh 1/4-20 x 2-5/8-inch Stainless Steel Eyebolt with Nut 10-Pack #ad - Ideal for use with cable, rope, or clamps up to 3/8″. Safe working load of 120 pounds. Includes (10) eyebolts and nuts. Lehigh’s stainless steel eyebolts are naturally rust and corrosion resistant. Inside diameter of eye is 1/2″. Each eyebolt measures 1/4″ thick x 2-5/8″ long, 20 teeth per inch (tpi).

 

Hindley 44309 14 X 4 Stainless Steel Eye Bolt With Nut #ad

Hindley 44309 1/4″ X 4″ Stainless Steel Eye Bolt With Nut

Hindley 44309 1/4″ X 4″ Stainless Steel Eye Bolt With Nut #ad - 44309. Nuts & bolts. Hindley manufacturering. Stainless steel.

 

14 X 2-12 Stainless Steel Eyebolt #ad

1/4″ X 2-1/2″ Stainless Steel Eyebolt

1/4″ X 2-1/2″ Stainless Steel Eyebolt #ad - Stainless steel is rust and water resistant for marine, bath and outdoor applications does not stain or corrode as easily as ordinary steel. The advantage of an eye bolt is that it allows things to hang from it and takes little time to install. 1/4″ x 2-1/2″ stainless steel eyebolt.

 

38 x 4 Eye Bolt - Stainless Steel Type 316 - Welded #ad

3/8″ x 4″ Eye Bolt – Stainless Steel Type 316 – Welded

3/8″ x 4″ Eye Bolt – Stainless Steel Type 316 – Welded #ad - Ideal for marine applications or other harsh environments. Constructed from marine grade type 316 stainless steel. These eye bolts are formed and welded for a heavy duty anchor point. Bolt diameter = 3/8″ shaft length = 4″ eye diameter = 3/4″. Often used to attach wire rope or other rigging hardware to a surface or object.

 

Stainless Steel Type 316 Shoulder Eye Bolts - Long - 58 x 12 #ad

Stainless Steel Type 316 Shoulder Eye Bolts – Long – 5/8″ x 12″

Stainless Steel Type 316 Shoulder Eye Bolts – Long – 5/8″ x 12″ #ad - Shoulder eye bolts can be used for either straight line or angular pulls. Wll shown is for in line pull pulling at an angle reduces the rated capacity significantly. Working load limit = 3,200 lbs quantity = 1. Made of type 316 stainless steel, which is used in marine applications for resistance to corrosion. Bolt width = 5/8″ shaft length = 12″ hole diameter = 1-3/8″.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.