Starrett 18C Automatic Center Punch Heavy-Duty With Adjustable Stroke, 5-1/4″ Length, 11/16″ Diameter
- Hardened and tempered steel components provide wear resistance and strength. Heavy-duty automatic center punch with 5-1/4″ length and 11/16″ diameter punches a starter dimple without the need for a hammer. Stroke impact can be set by turning knurled cap. Capable of striking a heavier blow than standard automatic center punch. Spring tension is constant for uniform depth and dimple size at each setting.
Starrett 63168 SM44W Steel Tape Measure with Adhesive Back, 1/2-Inch x 4′
- Starrett measure stix provides a tape measure that sticks to almost any work surface for convenient, at a glance measurements. High quality precision steel rule is flat with permanent adhesive back. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. 1/2″ width has an inch/foot face (1/16″ divisions). Mount on workbenches, saw tables, drafting tables, etc. Cut to size with scissors. Easily cut to size with scissors. Mounts on work benches, saw tables, drafting tables, etc. Reads left to right or right to left.
Starrett 1202F-6 Dial Caliper, Stainless Steel, White Face, 0-6″ Range, +/-0.001″ Accuracy, 0.010″ Resolution, Meets Specifications
- Thumb-operated fine adjustment roll allows for one-hand use. Dial graduations of 001″ and 1/64″, with one revolution equivalent to 0100″. Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod. Sharp black graduations on the satin finished bar. Lock screw holds the sliding jaw in position, to ensure a consistent measurement. Rack teeth point down to keep foreign matter from clogging the gear, to help prevent measurement error. Knife-edge contacts, thumb-operated fine adjustment roll, adjustable bezel and lock screws for sliding jaw and dial bezel. Positive, spring-loaded double opinion anti-backlash control. The 1202f shows measurements as fractions on the yellow outer scale with 1/64th-inch graduations and decimal measurements on the white inner scale with 1/100th inch graduations. Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod for accuracy and long life.
Starrett 70B Pocket Scriber With Hardened Steel Point, 2-7/8″ Point Length, 3/8″ Handle Diameter
- The hexagon-shaped head prevents rolling. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured. The handle is of steel, knurled, and nickel plated.
Starrett 565A 4″ Overall Length, 9/16″ Pin Length, 1/16″ Pin Diameter, Drive Pin Punch
- The company, founded in 1880, is headquartered in athol, ma. The punch is made from hardened and tempered steel components that provide wear resistance and strength. The starrett 565a drive pin punch has a 4″ overall length with a 9/16″ pin length and 1/16″ pin diameter to push pins and rivets into or out of a workpiece. The l. S. Pin punches are used to insert or knock out rivets and pins in assemblies. It has a round shank, which is knurled for grip. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. They have a metal shank on one end and a metal pin driver on the other, and are typically tapped with a hammer.
Starrett Measure Stix SM412ME Steel White Measure Tape with Adhesive Backing, English/Metric Graduation Style, Left To Right Reading, 12′ (3.65m) Length, 0.5″ (13mm) Width, 0.0625″ Graduation Interval
- Reads left to right or right to left. Mounts on work benches, saw tables, drafting tables, etc. Produced with permanent adhesive back that sticks to almost any work surface for convenient, at-a-glance measurements. Easily cut to size with scissors. Manufactured of high quality precision steel for extended service use.
Starrett 135A Pocket Level With Satin Nickel-Plated Finish, 2-1/2″ Size
- Vial sensitivity is 17 to 21 minutes. Compact size and smooth, convex ends for fitting in a pocket. 2-1/2″ pocket spirit level for determining horizontal plane. Body is hexagonal brass with a satin nickel-plated finish that resists corrosion. Glass vial resists scratching to provide clear readings.
Starrett 505A-7 ProSite Protractor
- 12-inch version also available to cover. Scale shows angle for a miter joint and single cut. Takes error-prone calculations out of miter cuts. Upside down or backwards, the reading is always correct. Saves time and reduces waste. Ideal for carpenters, plumbers and all building trades. Features durable 1/4-inch thick aluminum alloy and reflon o-ring for smooth, precise operation. 7-inch miter saw protractor with two scales-red -inchmiter cut-inch scale and black -inchsingle cut-inch scale. 7-inch long 1-1/2-pound 1-year warranty. Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations.
Starrett KBS1224-10 Bi-Metal Unique High Speed Steel Safe-Flex Hacksaw Frame Blade, 0.025″ Thick, 24 TPI, 12″ Length x 1/2″ Width (Pack of 10)
- Measures 12-inches length by 1/2-inches width. Made with a patented solid-state diffusion process with 170 percent more high speed steel weld area and ground teeth. Bi-metal unique safe-flex hacksaw frame blade. For reduced blade fracture, faster cutting and longer life. 24 teeth per inch.
Starrett 162C Pin Vise, 0.050″-0.125″ Range
- Tapered collet provides maximum clamping surface. Knurled rings and handle provide a secure grip. Pin vise securely holds workpieces 0050″ to 0125″ in diameter including small stock, taps, drills, reamers, scribers, wire, small files, and other tools. 2″ handle length, 1/4″ handle diameter, and 3-13/16″ overall length (with chuck closed). Nickel-plated handle and binding nut provide durability and wear-resistance.
Starrett SB565Z Brass Drive Pin Punches Set, 8 Pieces
- They have a cylindrical body to hold and drive the smaller diameter, flat-ended tip into the workpiece. Each pin punch is made from brass, for use with surfaces that could be damaged by harder steel punches. S. Pin punches are used to place or knock out loosened pins and rivets from workpieces, where they are frequently used to attach something to a rotating shaft. The set is in a fabric case, and includes pin punches with the following diameters 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, and 5/16″. The starrett sb565z is an eight-piece brass drive pin punch set to drive pins into or out of a work piece. The l. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in athol, ma.
Starrett 117AA Center Punch With Round Shank, 3″ Length, 1/16″ Tapered Point Diameter
- The starrett 117aa center punch with round shank is 3″ long and has a 1/16″ (1. The punch is made from hardened and tempered steel, which provides wear resistance and strength. S. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. Automatic center punches have an internal spring mechanism that enables them to mark the material without using a hammer, leaving one hand free for steadying the work. Manual center punches have a metal shank with a point and are typically tapped with a ball-peen hammer to mark the material. The company, founded in 1880, is headquartered in athol, ma. The round shank is knurled for grip. The l. 5 mm) diameter tapered point. Center punches make small dimple marks in a workpiece to help guide a drill bit.
Starrett Exact KTX34-5M-N ABS Plastic Case Red Measuring Pocket Tape, Metric Graduation Style, 5m Length, 19mm Width, 1mm Graduation Interval
- Produced of high durability abs plastic for extended case life, these tape measures offer overmold for improved grip. Belt clips. Their ergonomic design fits comfortably in the hand and incorporate industry standard standout, and improved blade protection.
Starrett 70A Pocket Scriber With Hardened Steel Point, 2-3/8″ Point Length, 1/4″ Handle Diameter
- Scriber point is hardened and finely tapered so location of point is not obscured. Knurled and nickel plated steel handle. Hexagon head prevents rolling. Point can be reversed, telescoped into handle and locked by the chuck, when not in use. Knurled chuck holds scriber firmly.
Starrett C33H-12-4R 12-Inch Combination Square with Square Head Only
- Square blade easy-to-read, sharp graduation. The square head are forged hardened steel with smooth black enamel finish. Square blades are machine divided, hardened and tempered for long life. With reversible lock bolt, scriber, spirit level. A multi-purpose tool that can be used for applications that require a 45-degree miter, a depth gage, a level, a plumb, and a precision rule. Features easy-to-read, sharp 8ths, 16ths, 32nds, and 64ths graduations. Protractor heads have revolving turrets with direct-reading double graduations, 0-180-degrees in opposite directions, for the direct reading of angles and supplementary angles. A reversible lock bold allows the blade to be turned over or end-for-end, without removing the lock bold or nut to ensure true alignment of the blade and heads. Bearing surface is accurately ground. Graduation no 4r, 1/8″, 1/16″, quick reading 1/32″, 1/64″.
Starrett AR-24 Anodized Aluminum Straight Edge Rule, 24″ Length, 1.125″ Width
- Designed to meet the general-utility measuring needs of schools and shops, woodworkers, tinsmiths, metal workers, and bench applications. Rules are graduations reading 1/8″ on one edge, 1/16″ on the other. They lie flat, resist bending and feature large, easy-to-read graduations and numbers that are heavier than conventional machine-graduated scales.
Starrett 117C Center Punch With Round Shank, 4″ Length, 1/8″ Tapered Point Diameter
- Manual center punches have a metal shank with a point and are typically tapped with a ball-peen hammer to mark the material. The l. The starrett 117c center punch with round shank is 4″ long and has a 1/8″ (3 mm) diameter tapered point. Automatic center punches have an internal spring mechanism that enables them to mark the material without using a hammer, leaving one hand free for steadying the work. The punch is made from hardened and tempered steel, which provides wear resistance and strength. Center punches make small dimple marks in a workpiece to help guide a drill bit. Starrett company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. S. The round shank is knurled for grip. The company, founded in 1880, is headquartered in athol, ma.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
