M&N Multi-purpose Double Featherboards Feather Loc Board for Table Saws Router & Tables Fences Tools Miter Gauge Slot Woodwork DIY
- The featherboard are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting. The result is a dramatic increase in the accuracy, quality and safety of the cuts. This popular router-table accessory consists of not one, but two industrial-quality featherboards. . Note that it can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. Usually the product will be sent in 2-5 working days and takes about 3–9 business days to reach you a featherboard is undoubtedly the most underrated router-table accessory of all time. The featherboard slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs.
Featherboard, Drillpro Double Featherboards Feather Loc Board for Table Saws Router & Tables Fences Tools Miter Gauge Slot Woodworking DIY
- Note that it can also be used on a table saw, shaper, band saw or any other woodworking machine with a miter gauge slot. 4 miter bars, that fit most standard miter slots (19395mm), also four 1/4″ t-track bolts and two tandem t-slot bolts. Quickly set tension for consistent cuts while reducing the chance of kick-back. The featherboard is made from high-tech polymer ensures it will maintain its original shape and for holding the stock against the guide fence. Provide elastic pressure, prevent wood rebound and pushing the block more smooth.
Big Horn 10215 Deluxe Table Saw, Router Table & Shaper Featherboard
- Two locking knobs keep alignment straight. Fits most standard miter slots. Easy-to-find bright safety yellow. Expandable nuts allow for snug fit.
Bench Dog 40-011 Feather-Loc Double Featherboard for Table Saws & Router Tables
- Two multipurpose featherboards for holding the stock against the guide fence. Designed for 1/4″ t-tracks only requires benchdog 10-012 miter slot adapter for miter slots on routers, shapers, band saws, and table saws. Easy set-up feature reduces kickback, binding, lifting, and bent blades. High tech polymer ensures it will maintain its original shape. Advanced design means no marring to your workpiece.
Bench Dog 10-005 Feather-Loc Single Featherboard for Table Saws and Router Tables by Bench Dog
- Multipurpose featherboard for holding the stock against the guide fenceunique miter gauge slot allows quick removaleasy set-up featurehigh tech polymer ensures it will maintain its original shapeadvanced design means no marring to your workpiece.
GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG
- Stabilizes for cutting bevel rips, resawing, irregular-shaped stock, dowels, dados and more. Precise 1/4″ thin rips. For use on table saws, router tables, jointers, and band saws. 3-directional force for total control of the workpiece and virtually eliminate kickback. Includes instructional and advanced techniques dvd. Moving-blade-guard hand protection. Made in the usa a true microjig innovation.
Feather Duo Stackable FeatherBoard Table Saw Router Table High Density Foam Kit, 90 Pounds Pressure, Reversible, Replacement Fingers FP3
- Choose between the standard feather or the optional ultralight feather for greater control and feedback when feeding more delicate workpieces. Feather foam will not mar softwoods, like other featherboards, when high tension is applied. Eva high density foam material of the feather component is very strong and durable. Unique feather component is pressed into the featherpro body so you can easily replace foam feathers or reverse feed direction quickly. Stackable featherpro includes two featherboards with one set of standard feathers, one set of ultralight feathers, and two complete sets of mounting hardware and spacers for stacking.
Big Horn 10215 Deluxe Table Saw, Router Table & Shaper Featherboard by Big Horn
- Fits most standard miter slotsexpandable nuts allow for snug fittwo locking knobs keep alignment straighteasy-to-find bright safety yellow.
FeatherBoard Milescraft 1406 for Router Tables, Table Saws and Fences
- Ergonomic knobs help prevent over-tightening and provides non-slip loosening. Dual slide motion-side to side and forward action for quick and easy setup. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Split rail miter bar construction-provides maximum hold. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences, New
- Ergonomic knobs help prevent over-tightening and provides non-slip loosening. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot. Split rail miter bar construction-provides maximum hold. Dual slide motion-side to side and forward action for quick and easy setup.
Saws & Blades Patented Table Saw and Router Table Push Block, Shoe, Stick with non-slip pads
- Fits most routers with up to 6″ diameter base plate. 450 square inches of a durable aluminum work surface. Turn your router into a stationary power tool with this sturdy table. The multi-functional fence makes joiner cuts easyrouter and bits not included. Saws & blades patented table saw and router table push block, shoe, stick with non-slip pads #0043/6.
MICRODIAL Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking (Works with GRR-RIPPER)
- Full instructional dvd and bonus project plans included. Precision taper cuts as accurate as 1/8 of a degree. Two independent memorylocks keeps angles for repeat taper cuts. Cut up to 8-sided tapered legs together with the grr-ripper 3d pushblock. Infinite taper adjustments between 0 and 10 degrees.
INCRA TSRTHW Table Saw Router Table Support Hardware
- Yellow board mates are used with table saws & router tables. Simultaneous, even pressure against the table & fence. Great for mounting user-made tables to the ts rail system. Also available in green for use with your shapers & orange for use with your radial arm saw. A necessity for the safety-conscious woodworker.
MLCS 9027 Dust Catcher for Table Saws and Router Tables
- Two locking knobs keep alignment straight. Easy-to-find bright safety yellow. Expandable nuts allow for snug fit. Attaches easily with supplied snap-on hardware.
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
- Pre-load tension design maintains consistent pressure across face of the featherboard. Unique pre-load tension design-quickly set tension for consistent cuts while reducing the chance of kick-back. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. 5/8″ and 3/4″ metal miter bars fit all standard miter slots. Split rail miter bar construction-provides maximum hold. All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Dual slide motion-side to side and forward action for quick and easy setup. This innovative featherboard design provides consistent tension and maximum holding pressure created by unique split rail construction.
Bench Dog 10-005 Feather-Loc Single Featherboard for Table Saws and Router Tables
- Advanced design means no marring to your workpiece. High tech polymer ensures it will maintain its original shape. Unique miter gauge slot allows quick removal. Easy set-up feature. Multipurpose featherboard for holding the stock against the guide fence.
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
- Work with small stock safely. Work with small stock safely on the table saw, router table, jointer, & band saw. Moving-blade-guard hand protection. 3-directional force for unmatched control of the work piece. Precise 1/4″ thin rips. 3-directional force for total control of the workpiece. Virtually eliminates kickback.
Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station
- Offset handle gets your right hand out of harm’s way. Rubber sole helps prevent slippage and won’t mar your work piece. Ergonomic “no-slip” grip has the best feel. Special handle geometry keeps push-loc parallel to your rep fence throughout the entire cut. Rear tail hook secures push-loc to your work piece.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
