MLCS Raised Panel Router Bit: Ogee Profile
- Makes an attractive ogee profile for your rased panel door. 2-flute, carbide-tipped with totally-enclosed ball bearing guide. 2-1/4″ large diameter.
MLCS Raised Panel Router Bit: Double Ogee Profile
- Top quality, carbide-tipped router bit. Free shipping in contiguous usa. Make beautiful raised panel doors. 1/2″ shank.
Yonico 12131 Raised Panel Router Bit – Cove Door – 3-1/8″ Diameter 1/2″ Shank
- Industrial radial guide bearing for easy operation and depth stop. For use in table mounted routers to easily cut the front profile of your cabinet door center panels in solid wood or mdf. Premium quality c3 micro-grain carbide cutters with silver induction brazing for maximum strength. This 2-1/2″ cove panel raiser has a cutting depth of 1″ and a total cutting height of 7/16″ which includes a 1/8″ fillet this bit can cut panels for door frames with grooves of up to 3/8″ deep this bit features thick carbide cutters and a 1/2″ shank. Satisfaction guaranteed & limited lifetime warranty.
3 Wing Flat Raised Panel Router Bit With Cove & Bead Stile & Rail Cutters – 3 PC Set
- Includes wooden storage box. Raised panel bit sets are designed to be used in a router table only. All bits have a 1/2″ shank and are designed to be used on 3/4″ stock. This carbide router bit set cut smooth in hardwoods and softwoods.
Rockler Ogee Horizontal Raised Panel Router Bit, 2-1/2″ Diameter x 5/8″H
- . The bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. Our panel raising bits are manufactured with a shear angle that is optimized for the smoothest possible cuts, both with and across the grain. Horizontal panel raising bits must be run at a slower rpm. The horizontal orientation combined with the bearing guide allows you to raise panels for doors with arched or cathedral rails.
Rockler Cove Vertical Raised Panel Router Bit, 1-1/4″ Diameter x 1-5/8″H
- Note vertical panel raising bits cannot be used for cathedral-style or arched doors. Precision machining paired with a sturdy 1/2″ shank ensure smooth, chatter-free cuts. This means you can raise panels with an ordinary 2 hp router mounted in a router table. Vertical panel raising bits concentrate more of their weight toward the center of the bit, reducing strain on the motor and allowing you to spin the bit at higher rpms. .
MLCS Raised Panel Router Bit with Undercutter: Ogee Profile
- 2 flute, carbide-tipped with fully enclosed ball bearing guide for 5/8″-1″ stock. Cuts the back and front of the panel with one bit. 3-1/8″ large diameter. . The undercutter panel bit lets you produce flush panels, adds a radius to the back sides of panels for decorative appearance or reduces the exposed upper panel profile. Depth of cut is 1-1/4″.
MLCS Raised Panel Router Bit: Cove Profile
- Ideal for cabinet doors. Produces a graceful concave raised panel. 2-flute, carbide-tipped with totally-enclosed ball bearing guide. 3-1/2″ large diameter.
Yonico 12404 4 Bit Vertical Raised Panel Router Bit Set with 1/2-Inch Shank
- Manufactured from c3 micrograin carbide, the yonico 12404 set will yield years of raised panel cabinet making. . Set includes a beautiful solid wood storage case. Own 4 of the most popular vertical panel raiser profiles in this impressive 4 bit router bit set. All bit shanks are 1/2″ with a cutter length of 1-1/2″. The yonico 12404 router bit set includes the following 4 vertical panel raiser designs bevel, ogee, ogee & bead and cove.
Yonico 12150 Raised Panel Router Bit With Back cutter with Bevel 2-3/4″ Diameter 1/2″ Shank
- Large heavy duty router bit that will cut the front profile and the back cut at the same time. Industrial radial guide bearing for easy operation and depth stop. This bevel panel raiser has a cutting depth of 1-1/8″ and can be used on stock up to 1-1/8″ thick the backcutter cuts 3/8″ deep plus a 3/16″ radius relief. Satisfaction guaranteed & limited lifetime warranty. Premium quality c3 micro-grain carbide cutters with silver induction brazing for maximum strength.
Yonico 12133q Raised Panel Router Bit with Carbide Tipped Cove 1/4-Inch Shank
- Build-up and heat resistant teflon coating. Satisfaction guaranteed & lifetime warranty. Router bit, router bits, router bit set, router bit sets. Satisfaction guaranteed and lifetime warranty. Industrial quality router bits. Build-up & heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design. C3 micro-grain tungsten carbide cutters.
Magnate 3805B Raised Panel Router Bit, Horizontal – Ogee Profile; 1-1/2″ Reveal
- Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. . It is also equipped with wide open gullets for easy disposal of wood chips.
Rockler Cove Horizontal Raised Panel Router Bit, 2-1/2″ Dia. x 5/8″H
- Horizontal panel raising bits must be run at a slower rpm. The bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. Our panel raising bits are manufactured with a shear angle that is optimized for the smoothest possible cuts, both with and across the grain. The horizontal orientation combined with the bearing guide allows you to raise panels for doors with arched or cathedral rails.
Magnate 3894 Raised Panel Router Bit, Horizontal – 25 degree Face Cut Profile; 1-7/32″ Reveal
- This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. . Excessive overall length may cause tool damage.
MLCS Raised Panel Router Bit: 45 Degree Shaker Bevel Profile
- 2-flute, carbide-tipped with totally-enclosed ball bearing guide. 2-3/4″ large diameter. This bit is used for thomas moser style shaker furniture. Create classic shaker style furniture with a 1/2″ deep tongue.
Yonico 12336 Raised Panel Router Bit Door Set with Round Over and Ogee Panel Raiser 1/2-Inch Shank
- Rail and stile bits create a perfectly matched rail and stile door frame. All router bit shanks in this set are 1/2″. The yonico 12336 cabinet door router bit set includes rail and stile bits in classic round over design with a standard ogee panel raiser. . The ogee raised panel bit puts a beautiful edge on the central panel of your door. Ball bearing guides allow for precise cuts without the use of a fence. Use with up to 1″ stock. Set comes in a solid wood storage case.
Yonico 12135 Raised Panel Router Bit with Backcutter Cove 3-1/4-Inch Diameter 1/2-Inch Shank
- Use with 5/8″-1″ stock. • back cutter, 2″ diameter x 1/4″ cutter height • front cutter, 3-1/4″ diameter x 9/16″ cutter height. The yonico cove panel raiser router bit with back cutter will cut cove raised panels easily while reducing the tongue thickness to 1/4″. Two flute carbide cutters and 1/2″ shank.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
