Hot Dipped Galvanized Hex Bolt 5/8″ x 16″ (45 Pack)
- Quantity 45 bolts. Saltwater & freshwater use. Hex bolt head designed for socket wrench. 5/8″ diameter x 16″ length w/ 6″ of thread. Hot dipped galvanized (hdg).
CM M853AG Alloy Anchor Shackle with Galvanized Bolt, Nut and Cotter, 9.5 Ton Work Load Limit, 7/8 Size by CM
- Galvanized carbon steel with alloy pin. Good for permanent or long term installations. Import china. Stamped with trade size and wll. Cm m853ag alloy anchor shackle with galvanized bolt, nut and cotter, 95 ton work load limit, 7/8 size.
Hot Dipped Galvanized Hex Bolt 5/8″ x 12″ (10 Pack)
- Machine bolts, hex cap bolts or hex cap screws) have hexagonal heads and are for general purpose applications with a socket type installation tool or standard wrench. Hex bolts (aka. Hex bolts are ideal for general applications such as wood to wood and metal to wood. Hex bolts typically use two washers one between the head and the material, and one between the material and the nut. Also, the ability to fit a wrench/socket on both sides allows the installer to tighten or loosen from both sides.
Hot Dipped Galvanized Hex Bolt 5/8″ x 14″ (50 Pack)
- Saltwater & freshwater use. Quantity 50 bolts. Hex bolt head designed for socket wrench. 5/8″ diameter x 14″ length w/ 6″ of thread. Hot dipped galvanized (hdg).
Hot Dipped Galvanized Hex Bolt 5/8″ x 14″ (10 Pack)
- Hex bolts are ideal for general applications such as wood to wood and metal to wood. Hex bolts typically use two washers one between the head and the material, and one between the material and the nut. Machine bolts, hex cap bolts or hex cap screws) have hexagonal heads and are for general purpose applications with a socket type installation tool or standard wrench. Also, the ability to fit a wrench/socket on both sides allows the installer to tighten or loosen from both sides. Hex bolts (aka.
Bolt & Nut Anchor Shackles – 5/8″ anchor shackle galvanized bolt nut &
- Product type -clips and shackles. -When ordering, specify galvanized (g) or painted (p). -All shackles are marked with size (inches and millimeters) and working load limit in tons. -Bolt, nut & cotter shackles have thread protected ends and are 100% proof tested. Generic specifications -ultimate strength equals 5 times working load limit. 75 pounds. 490-m851g features -all shackle bodies and pins are forged from alloy steel, heat treated and tempered. Dimensions overall product weight -1.
Hot Dipped Galvanized Hex Bolt 5/8″ x 10″ (60 Pack)
- Hot dipped galvanized (hdg). Quantity 60 bolts. Hex bolt head designed for socket wrench. 5/8″ diameter x 10″ length w/ 6″ of thread. Saltwater & freshwater use.
Hot Dipped Galvanized Hex Bolt 5/8″ x 10″ (10 Pack)
- Machine bolts, hex cap bolts or hex cap screws) have hexagonal heads and are for general purpose applications with a socket type installation tool or standard wrench. Hex bolts typically use two washers one between the head and the material, and one between the material and the nut. . Also, the ability to fit a wrench/socket on both sides allows the installer to tighten or loosen from both sides. Hex bolts are ideal for general applications such as wood to wood and metal to wood. Hex bolts (aka.
Hot Dipped Galvanized Hex Bolt 5/8″ x 12″ (60 Pack)
- Hot dipped galvanized (hdg). Hex bolt head designed for socket wrench. 5/8″ diameter x 12″ length w/ 6″ of thread. Saltwater & freshwater use. Quantity 60 bolts.
1/2″ Galvanized Bolt Type Anchor Shackle, WLL 2 Ton, Import
- These shackles are imported. Galvanized, forged carbon steel, heat treated, with alloy pins, permanently marked with trade size and working load limit. Bolt-type shackles can be used in any application where round pin or screw pin shackles are used. For use in industrial lifting, towing and tie-down applications. Murphy bolt type anchor shackles. Never exceed the working load limit . In addition, they are recommended for permanent or long term installations and where the load may slide on the shackle pin causing the pin to rotate.
3M DBI-SALA 5901980 Ladder Gate, Hinged Heavy Guage Aluminum Shield, with Galvanized Bolt-On Brackets, Silver
- Galvanized construction offers excellent durability and corrosion resistance for smooth operation and added longevity. Authorized users simply unlock the gate and swing open for unhampered access to the ladder. Allows gate to be swung completely out of the climber’s way when ladder is in use for added ease of use and complete safety. Provides maintenance free, rust and tamper proof construction for peace of mind and longevity. Ladder gate, hinged heavy guage aluminum shield with galvanized bolt-on brackets.
Carriage Bolt 5/16-16 or 3/8-16 Galvanized (100 count) includes nuts (5/16″ X 2-1/2″)
- Carriage bolt 5/16-16 or 3/8-16 galvanized (100 count) includes nuts •thread pitch 16 •choose length from 1-1/4″ to 3-1/2″ •you will receive 100 galvanized bolts and 100 galvanized nuts •galvanized coating for protection from the elements •all purpose exterior bolt for many applications use for chain link fencing hardware, in the shop, the barn, for equipment repair and more •with these square neck bolts you just need a square hole or a slot in order for the bolt to back itself up. They eliminate the need for an extra wrench as the bolt head itself holds the bolt from turning while you tighten.
CM M849G Super Strong Anchor Shackle with Galvanized Bolt, Nut and Cotter, 2 Ton Work Load Limit, 7/16″ Size
- Shackles show major deformation before failure. Manufactured from technically advanced micro alloy steel with optimal hardness for strength and ductility. Working load limit and traceability codes shown as permanent markings on body. Shackles meet dimensional requirements and exceed performance requirements of rr-c-271. All shackles have alloy quenched and tempered pins.
U-BOLT 1/2 x 2-3/8 x 5-3/8 Galvanized
- Tie down engineering 86225, tie86225. Will bridjit fit my curb see the compatibility criteria image and measure your driveway curb ramp before ordering. Three-piece set provides 12 feet of coverage and fits both straight and curved driveway entries expandable to the size you need by purchasing additional 48″ center sections (sold separately, asin b002yq2gxc). Easily installed with only a hammer and screwdriver bolt together with pre-inserted galvanized bolts to connect the sections, not to the ground. Channel on the underside of each section allows water to flow under the ramp.
CM M849G Super Strong Anchor Shackle with Galvanized Bolt, Nut and Cotter, 2 Ton Work Load Limit, 7/16 Size by CM
- Manufactured from technically advanced micro alloy steel with optimal hardness for strength and ductilityshackles show major deformation before failureworking load limit and traceability codes shown as permanent markings on bodyall shackles have alloy quenched and tempered pinsshackles meet dimensional requirements and exceed performance requirements of rr-c-271.
Galvanized Bolt & Nut Anchor Shackle – 3Ton- 1/2, Sold As 1 Each
- All shackles are marked with size (inches and millimeters) and working load limit in tons. All shackle bodies and pins are forged from alloy steel, heat treated and tempered.
DC Cargo Mall E Track Rail Tie-Down Installation Fasteners Kit with Hex Head 2 Inches Long Galvanized Bolts, Nuts, Washers (10 Pack)
- These hex head bolts can be fastened manually with a wrench or with a screwdriver or drill, using a 7/16″ diameter drive. The bolts are six-sided hex bolts with a diameter of 1/4″ and a length of 2″. To install, place the bolt through the hole on the e track and through the hole in the metal surface. This e track fastener pack comes with 10 bolts, nuts, and washers. Thread the washer on the bolt before or after sliding it through the holes. All e track products are compatible with a tracks as well. The washer helps distribute the pressure of the nut to prevent damage to the vehicle and keep the nut tight. Your e track tie-down system needs a sound installation to be the reliable cargo anchor it is. These fasteners are made of durable steel that can tolerate rough elements and heavy use for year and they are protected from corrosion and rust by hot-dip galvanization. Fasten the nut on the other side of the surface. Use these hex bolts to fasten your e track rail to a metal truck’s floor or wall and you can be certain of the dependability of your cargo restraints. They can be removed the same way.
Hot Dipped Galvanized Hex Bolt 5/8″ x 16″ (10 Pack)
- Hex bolts are ideal for general applications such as wood to wood and metal to wood. Hex bolts (aka. Machine bolts, hex cap bolts or hex cap screws) have hexagonal heads and are for general purpose applications with a socket type installation tool or standard wrench. Hex bolts typically use two washers one between the head and the material, and one between the material and the nut. Also, the ability to fit a wrench/socket on both sides allows the installer to tighten or loosen from both sides.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
