LH0498 HH 726-W-3 fluorescent lamp holder with tapped hole bracket
- Bracket with tapped hole. Polycarbonate. 660w-600v.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M8-1.25 Thread Size, For 0.8 mm-4 mm Material Thickness, 14.5 mm Edge Distance (Pack of 25)
- Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Steel is often used in applications where strength is the primary consideration. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Plain surface has no. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold.
Genuine OEM Branson Ultrasonic 3/4” Extender with Tapped Hole, Length 10”, Tuned to 20 KHz.
- This part is fully compatible with branson, telsonic, sonics and materials, misonix,and dukane etc machinery. Proudly made in usa. Material high grade titanium alloy ti-6al-4v this gives the product excellent acoustical characteristics at ultrasound frequencies, high tensile strength, high resistance to corrosion and cavity erosion. All ultrasonic extenders are tested and tuned to specifications.
J.W. Winco 187.4-40-60-A-NI Serrated Locking Plate, GN187.4-NI, 40 mm OD with 60 Teeth with M8 x 1.25 Tapped Hole in The Center and Two 6.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Stand
- The range of options makes these plates adaptable for almost any application. 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle. With the aid of gn 187.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, Metric, M10-1.5 Thread Size, For 1 mm-6 mm Material Thickness, 19 mm Edge Distance (Pack of 10)
- Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration. Plain surface has no. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Clip is u-shaped for a secure hold on both sides of the panel when screwing down.
14Ru Rack Rail For 19″ Racks – #10X32Tpi Tapped Holes New Condition
- Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Steel is often used in applications where strength is the primary consideration. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Available sizes 2u (555-13218) 4u (555-13220) 6u (555-13222) 8u (555-13224) 10u (555-13226) 12u (555-13228) 14u (50-1895) 16u (50-1900) 18u (555-13230) 21u (555-13232).
Genuine OEM Branson Ultrasonic 1/2” Extender with Tapped Hole, 20 KHz
- Material high grade titanium alloy ti-6al-4v this gives the product excellent acoustical characteristics at ultrasound frequencies, high tensile strength, high resistance to corrosion and cavity erosion. All ultrasonic extenders are tested and tuned to specifications. Proudly made in usa. This part is fully compatible with branson, telsonic, sonics and materials, misonix,and dukane etc machinery.
J.W. Winco 187.4-27-60-A-NI Serrated Locking Plate, GN187.4-NI, 27 mm OD with 60 Teeth with M5 x 0.8 Tapped Hole in The Center and Two 4.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Standa
- With the aid of gn 187. The range of options makes these plates adaptable for almost any application. 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle.
Genuine Unistrut P1723-EG 2 Hole 90 Degree Angle with 1) 5/16″-18 Thread Tapped Hole and 1) 9/16″ Diameter Hole Connector Bracket for All 1-5/8″ Strut Channel
- For use with 1) 1/2″ bolt in all 1-5/8″ series strut channels. Genuine unistrut brand. One 5/16″-18 tapped hole and one 9/16″ diameter hole thickness 1/4″ (6mm). Finish electro-galvanized astm b633, type iii. 2 hole ninety degree single tapped angle fitting.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, 1/4″-20 Thread Size, For 0.025″-0.15″ Material Thickness, 0.531″ Edge Distance (Pack of 25)
- Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Plain surface has no. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut.
16RU Rack Rail for 19″ Racks-#10x32TPI Tapped Holes
- Bracket with tapped hole. Available sizes 2u (555-13218) 4u (555-13220) 6u (555-13222) 8u (555-13224) 10u (555-13226) 12u (555-13228) 14u (50-1895) 16u (50-1900) 18u (555-13230) 21u (555-13232). Polycarbonate.
J.W. Winco 187.4-40-48-A-NI Serrated Locking Plate, GN187.4-NI, 40 mm OD with 48 Teeth with M8 x 1.25 Tapped Hole in The Center and Two 6.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Stand
- 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle. The range of options makes these plates adaptable for almost any application. . With the aid of gn 187.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, 5/16″-18 Thread Size, For 0.025″-0.15″ Material Thickness, 0.562″ Edge Distance (Pack of 25)
- Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Plain surface has no. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold.
Thomas & Betts DSS-1-BR Red Dot D-Pak Dry-Tite Round Lampholder Cover with One Tapped Hole, Bronze by Thomas & Betts
- Spacious, accessible wiring chamber that provides a convenient location to maintain or change a system, pull conductors and make splicesprecision npt threads allow trouble-free field installation for rigid, imc or emt conduitincludes inside heat resistant gasket, plug, and ground screwdry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locationsrohs compliant.
MAG-MATE GT1200R Rare Earth Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 12″
- Magnetic grate tube/rod comes with 1/4-d tapped mount holes in the end plugs. Used to capture inch fine particle” separation such as metal fillings, shavings, metal wear residue, work hardened stainless steel, etc. 1″ diameter tubes by 12 inch long. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. Extremely powerful rare earth magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. For applications to purify products as well as equipment protection.
Thomas & Betts DSS-3-BR Red Dot D-Pak Dry-Tite Round Lampholder Cover with Three Tapped Hole, Bronze
- Precision npt threads allow trouble-free field installation for rigid, imc or emt conduit. Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations. Spacious, accessible wiring chamber that provides a convenient location to maintain or change a system, pull conductors and make splices. Rohs compliant. Includes inside heat resistant gasket, 1/2-inch plug, and ground screw.
Thomas & Betts DSS-1-BR Red Dot D-Pak Dry-Tite Round Lampholder Cover with One Tapped Hole, Bronze
- Rohs compliant. Precision npt threads allow trouble-free field installation for rigid, imc or emt conduit. Spacious, accessible wiring chamber that provides a convenient location to maintain or change a system, pull conductors and make splices. Includes inside heat resistant gasket, plug, and ground screw. Dry-tite boxes and covers protect wiring devices, switches, electronic components and terminal blocks in dry, damp and wet locations.
J.W. Winco 187.4-27-48-A-NI Serrated Locking Plate, GN187.4-NI, 27 mm OD with 48 Teeth with M5 x 0.8 Tapped Hole in The Center and Two 4.3 mm Counterbored Holes for Socket Cap Screws, Sintered Stainless Steel, European Standard No.10.4404 (American Standa
- With the aid of gn 187. 4-ni serrated locking plates, standard components can be interlocked and firmly set at a defined angle. The range of options makes these plates adaptable for almost any application.
MAG-MATE GT1000R Rare Earth Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 10″
- For applications to purify products as well as equipment protection. . 1″ diameter tubes by 10 inch long. Used to capture inch fine particle” separation such as metal fillings, shavings, metal wear residue, work hardened stainless steel, etc. Magnetic grate tube/rod comes with 1/4-d tapped mount holes in the end plugs. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. Extremely powerful rare earth magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates.
Steel Tapped-Hole U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.125″ Material Thickness, 0.468″ Edge Distance (Pack of 25)
- Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Plain surface has no. Clip is u-shaped for a secure hold on both sides of the panel when screwing down. Hole is tapped, or fully threaded, for screws that need to extend beyond the bottom of the nut. Steel is often used in applications where strength is the primary consideration.
Racks & Rack Cabinet Accessories Adapter plate Pkg/2 84 tapped holes
- M8 x 125 tapped hole in the center and two 63 mm counter bored holes for socket cap screws. 3 holes 1/2″. 115 mm height. Manufacturer vector product category racks & rack cabinet accessories rohs product rack accessories.
MAG-MATE GT0800C Ceramic Magnetic Separation Rod with 1/4-20 Tapped Holes, 1 x 8″
- Powerful ceramic magnetic material inside a stainless steel tube designed to capture ferrous metal from dry particulates. Magnetic grate tube/rod comes with 1/4-20 tapped mount holes in the end plugs. Ideal for custom installations that require magnetic separation but lack space or build your own grate assembly. Used to capture small to larger ferrous particle separation such as nails, bolts, washers, etc. 1″ diameter tubes by 8″ long. The kind of metal that could cause damage to processing equipment.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
