Coolest 23 1 2 Shanks in 2020

 

Amana Tool – 54172 Carbide Tipped Corner Round 3/8 Radius x 1-1/2 Dia x 1″ 2 Shank - #54172, diameter (d) 1-1/2, radius (r) 3/8, cutting height (b) 1, shank (d) 1/2, overall length (l) 2-7/8, b1 25/32, replacement bearing 47716, flutes 2, d1 1-3/8, 54172 carbide tipped corner round 3/8 radius x 1-1/2 dia x 1 inch x 1/2 shank. Use in a handheld or table-mounted router. This group of hard-to-find tools is particularly suitable for antique reproductions and restoration projects. Produce three slightly different profiles using this bit, an edge bead with or without a fillet and a full corner bead, by altering the bit extension or rolling the workpiece between passes.

 

Accusize Industrial Tools Double Flute Extra Long Straight Carbide Tipped Router Bit, 1/2” Diameter, 3” Depth, 1/2” Shank, 4.7” Oal, 0021-0828 - Straight router bit high-quality structural carbon steel 45 2 flute carbide tipped straight shank shank diameter ½” cutting diameter ½” flute length 3″ overall length 4. X 3″ depth double flute extra long straight router bit with 1/2 shank, industrial quality, 0021-0828 individually dynamic balanced. Kickback reducing design carbide tipped double flute straight bits are designed to provide excellent smoothness of cut and balanced cutting with minimal vibration. These professional router bits are characterized by higher hardness and longer life and resulting in nice finishing on woody pieces after cutting compared with the similar products, this product is more than two times life longer. Cuts all composite materials, softwoods, plywood, hardwoods, glass fiber, and plastic, especially for hipboard(melamine board), glass fiber reinforced plastics(carbon fiber material), mdf, etc. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Accusize industrial tools, 1/2 dia. 7″ colour professional silver weight 90 g.

 

Cove Box Router Bit JESTUOUS 1/4” Cutter Diameter x 1/2”Shank Diameter x 1/8”Cutter with Radius Solid Carbide Double Flute Core Round Nose Routers Bits - Improved design for smoother finish ideal for high quality radius cuts, rounded grooves, letter. Cove box router bit use with routers that accept 1/2 in shank bits,fit for cutting rounded grooves and slots perfectly for a variety of materials from wood panels, flakeboard, plywood, mdf and other wood composites sheet materials,can also be used in handheld, table-mounted and cnc routers. Cutting, beading, fluting and general ornamentation. Packaging 1 with a plastic case. Carbide tipped for improved speed and long life,durable, hardened and sharpened high-speed steel body and shank, carbide-tipped edge, 2-flute design help to remove chips and make your job clean and smooth.

 

Accusize Industrial Tools 3/8”, H.S.S. Corner Rounding End Mills, 1/2” Shank Dia, 1-1/4” Cutter Dia, 3-1/2” Overall Length, 1011-3878 - 3/8″, shank dia. 1/2″, largest dia. 1-1/4″, overall length 3-1/2″ intended for use in milling rounded corners high-speed steel right-hand cut. Rad. Formed radius cutter.

 

Amana Tool – 46174 CNC Solid Carbide Compression Spiral 3/8 Dia x 1″ 2 Shank - Special unique carbide for longer lifetime in abrasive material. Particularly suitable for double-sided melamine or laminated material, #46174, (d) diameter 3/8, (b) cutting height 1, (d) shank 1/2, overall length (l) 3, b1 9mm, type solid carbide, flutes 2, cnc solid carbide compression spiral 3/8 dia x 1 inch x 1/2 shank. Designed for cnc applications requiring high feed rates and a clean finish.

 

Freud 77-216 1/2-Inch Diameter by 2-Inch Height Double Compression Bit with 1/2-Inch Shank - Combination of up and down shear flutes eliminate chipping on both sides of double-sided veneers or laminated materials for a fine finish. Fine finish, chip-free routing in double-sided veneers and laminates. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.

 

HOHXEN Flush Trim Pattern Router Bit 1/2” Shank Top & Bottom Bearing Milling Cutter For Woodworking Tool - Solid hardened steel bodies with anti-kickback design. Satisfaction guaranteed & lifetime warranty. Coating baked on heat resistant coating prevents build-up of sawdust, resin, and pitch. 1/2″ shank and extra long 2-1/2″ blade flush trim patter with top and bottom bearings router bit. C3 micro-grain tungsten carbide cutters build-up & heat resistant teflon coating.

 

Freud 99-480 1/2-Inch Shank Base Cap Router Bit, Matches Industry Standard Profile No.163 - This bit is ideal for renovators who need to match old, extra-high moldings choose this bit to rout base caps only or to profile the edge of wide base moldings matches industry standard base cap no163. Router bit dimensions are 1-3/4-inch diameter, 1-1/2-inch carbide height, 1/2 shank, 3-inch overall length. Freud’s limited lifetime guarantee. Perma-shield coating reduces friction and heat build-up, helps prevent the adhesion of resins and protects the bit from corrosion. Features freud’s tico hi-density carbide with titanium for long life and a flawless finish.

 

Amana Tool – 54198 Carbide Tipped Classical Multi-Form 1-1/4 Dia x 1″ 2 Shank - #54198, diameter (d) 1-1/4, radius (r) 3/16, cutting height (b) 1, shank (d) 1/2, overall length (l) 2-7/8, r2 1/8, replacement bearing 47702, r1 9/64, flutes 2, 54198 carbide tipped classical multi-form 1-1/4 dia x 1 inch x 1/2 shank. This one bit is designed to cut more than 40 different molding patterns. By making simple adjustments to the cutter height and fence position, and making two or more passes, you can produce a wide variety of profiles and architectural details.

 

Amana Tool – 47101 Carbide Tipped Flush Trim 3/8 Dia x 1″ 2 Shank - With the router handheld, the template is on the bottom of the work. Excellent for template work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Use this flush trimming bit for laminate work or for template and pattern work. , #47101, diameter (d) 3/8, cutting height (b) 1, shank (d) 1/2, overall length (l) 3-1/8, replacement bearing 47702, flutes 2, 47101 carbide tipped flush trim 3/8 dia x 1 inch x 1/2 shank.

 

Rockler Dish Carving Router Bit, 1-1/4” D, 1/2” Shank - These bits are competitively priced while offering high performance and long life. Quality performance features include k10 and k20 grade carbide for clean cutting action. Precision balanced for smooth operation. 1-1/4” diameter, 1/2” shank a fantastic value on high quality router bits. Final sharpening with 600, 800 grit diamond wheels. Use dish carving router bits for hollowing out areas in stock. Baked-on anti-stick coating to reduce pitch and resin buildup. Unconditionally guaranteed, if you are not 100% satisfied with these bits, send them back for a full refund.

 

Drill America 3/4″ x 12″ High Speed Steel Extra Long Drill Bit with 1/2″Shank, DWDDL Series - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. For general purpose drilling in applications where extra length for reach is required, designed to perform in a broad range of materials in the iron and steel families. Round shanks allow use with a wide variety of toolholding systems.

 

DONNGYZ Architectural Molding Handrail Router Bit Tungsten Carbide Trimming Groving Cutter Tool Set 1/2” Shank 10Pcs Suitable for Doors,Tables,Shelves,Cabinets,DIY Woodwork(US Stock) - Sharp & safe solid hardened steel bodies with anti-kickback design reduce kickback effect and ensure a safer working environment. Complete woodwork tool set complete your hardwood tool collection with 1/2″ shank carbide molding handrail router bitsworks great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood, hardwood and many others try them and see for yourself. Shipping address and distribution logistics company has warehouses in california and new jersey in the us, and we ship fed and ups carriers delivery time is 3-5 days we have a professional customer service team to reply you within 24 hoursif you have any questions, please feel free to contact usyou deserve the best after-sales service. Cuts smoothly producing clean, splinter free edges 1/2 inch shank ensures a strong grip and no wobble. Carbide coated material using carbide material at the edge of these bits keeps them lasting longer and performing better than their traditional steel tip counterparts.

 

Yonico 15224 1-1/2-Inch 2 Bit Tongue and Groove Router Bit Set 1/2-Inch Shank - For use on table mount router only. Silver induction brazing for maximum strength and durability. Premium c3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. This tongue and groove set will cut joints for stock up to 1-1/2″ thick with the groove measuring 1/2″ thick by 1/2″ deep. Create tongue & groove joints for projects such as flooring, rail and stile and many more.

 

Amana Tool – 47162 Carbide Tipped Flush Trim V-Groove 5/8 Dia x 1″ 2 Shank - , #47162, diameter (d) 5/8, cutting height (b) 1, shank (d) 1/2, overall length (l) 3-1/4, replacement bearing 47706, 47162 carbide tipped flush trim v-groove 5/8 dia x 1 inch x 1/2 shank. Trim the edges of face frames flush with cabinet sides with this bit. At the same time, cut a decorative v-groove to conceal the seam between the frame and the case.

 

2Pcs 1/4” + 1/2” Straight Diamond Brazed Profile Wheel Router Bit Set For Marble Granite Stone Hells Tile Edge Profiling Cutting 6.35mm + 12.7mm Shank (1Pcs 1/4” Shank +1Pcs 1/2” Shank) - Package include 2pcs gold brazed diamond straight ,shank diameter 635mm(1/4inch), 127mm(1/2inch) ,colorgolden. Brazing process serving life longer than conventional diamond coated rotary points. Total length 61mm(approx 24inch), 71mm(approx 28inch). Use wet or dry water or other cooling agent is recommended for longer life of the bit. Suitable for use in grind the edge of glass, metal, woods, stone, marble, rock, gemstone, jewelry, shells, tile etc.

 

Amana Tool – 54213 Carbide Tipped Triple Bead 1/8 Radius x 7/8 Dia x 1″ 2 Shank - #54213, diameter (d) 7/8, radius (r) 1/8, cutting height (b) 1, shank (d) 1/2, overall length (l) 2-59/64, type bead, replacement bearing 47716, flutes 2, 54213 carbide tipped triple bead 1/8 radius x 7/8 dia x 1 inch x 1/2 shank. Produce reeded or fluted pilasters or table legs referencing opposite faces of the workpiece. Use in a handheld or table-mounted router. Three uniform beads or flutes are formed in one pass with these bits.

 

Amana Tool – 45890 Carbide Tipped Keller Dovetail 14 Deg x 1″ Dia x 1″ 2 Shank - This bit is specifically designed for use in the kellera system. The popular kellera templates require the use of bits with shank-mounted pilot bearings. , #45890, diameter (d) 1, angle (a°) 14°, cutting height (b) 1, shank (d) 1/2, overall length (l) 2-3/4, type dovetail, replacement bearing 47738, keller number 3637, flutes 2, carbide tipped keller dovetail 14 deg x 1 inch dia x 1 inch x 1/2 shank with upper bb.

 

Amana Tool – 47118 Carbide Tipped Flush Trim 1/2 Dia x 1″ 2 Shank 3-Flute - It is especially good to use on laminates that tend to chip easily. , #47118, diameter (d) 1/2, cutting height (b) 1, shank (d) 1/2, overall length (l) 3-1/4, replacement bearing 47706, flutes 3, 47118 carbide tipped flush trim 1/2 dia x 1 inch x 1/2 shank 3-flute. For an extremely smooth finish, choose the three-flute configuration.

 

CMT 890.501.11 Horizontal Raised Panel Bit, 1/2-Shank, 3-1/4-Inch Diameter, Carbide-Tipped - Non-stick orange shield coating, anti-kickback design, equipped with bearing. 19/32-inch cutting length, board thickness from 19/32 to 23/32-inch, 2-33/64-inch length. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance. Great for making classic raised panel doors to be used in router tables (3-5 passes).

 

Amana Tool – 49406 Carbide Tipped Chamfer 45° x 2-3/8 Dia x 1″ 2 Shank - Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results use in a router table. Chamfer or bevel edges for decorative effect or to form edge miter joints. Will completely chamfer 1″ material. , #49406 diameter (d) 2-3/8, angle (a°) 45°, cutting height (b) 1, shank (d) 1/2, overall length (l) 2-7/8, replacement bearing 47706, flutes 2, c 1-3/8, 49406 carbide tipped chamfer 45 degree x 2-3/8 dia x 1 inch x 1/2 shank.

 

Alfa Tools FB61482 2 1/2″ Forstner Bit 1/2″Shank - Alfa tools multi-spur forstner bit, for larger holes. Set screw is recessed on shank to allow use of an extension for applications requiring extra reach. Inside cutting plane shaves holes smoothly. Solid one piece construction. Each bit includes one self-feeding screw and one hex wrench.

 

HSS Extra Long Drill Bit with 1/2″Shank Size: 3/4″ x 12″ - -Dec equivalent 7500. Use material -metal. Use -drill bits. -material high speed steel. -Product weight 2. Unit material -steel. Dwddl12x3/4×1/2 size 3/4″ x 12″ features -drill bit. -3/4” x 18” drill bit flute length 13. Generic dimensions -3/4” x 12” drill bit flute length 9. 5 lbs.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.