Coolest 23 Deep Hole Saws

 

BLUE BOAR 2-58 67mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 2-5/8″ (67mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2-5/8″ (67mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Recommend using with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . 2-1/4″ cutting depth. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

BLUE BOAR 5 127mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 5″ (127mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 5″ (127mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Recommend using with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . 2-1/4″ cutting depth. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

BLUE BOAR 1-14 32mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 1-1/4″ (32mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 1-1/4″ (32mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - 2-1/4″ cutting depth best when used with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

IIT 56200 2-Inch Deep Hole Saw 7-Piece by IIT

IIT 56200 2-Inch Deep Hole Saw, 7-Piece by IIT

IIT 56200 2-Inch Deep Hole Saw, 7-Piece by IIT - Durable metal blade housing. 1/4″ shank fits most all electric drills. Iit 56200 2-inch deep hole saw, 7-piece. 7pc circular tempered 65mm steel blades complete with plug remover. Blade diameter 1″ to 2-1/2″.

 

BLUE BOAR 6 152mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 6″ (152mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 6″ (152mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - 2-1/4″ cutting depth. Recommend using with 18v cordless drill set on screw setting. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off .

 

BLUE BOAR 58 16mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 5/8″ (16mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 5/8″ (16mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

BLUE BOAR 1-18 29mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 1-1/8″ (29mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 1-1/8″ (29mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth best when used with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. Unique tungsten carbide tooth design wide kerf allows fast plug removal.

 

BLUE BOAR 78 22mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 7/8″ (22mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 7/8″ (22mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Unique tungsten carbide tooth design wide kerf allows fast plug removal. Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

BLUE BOAR 5-34 146mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 5-3/4″ (146mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 5-3/4″ (146mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth. Recommend using with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included.

 

BLUE BOAR 4-58 118mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 4-5/8″ (118mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 4-5/8″ (118mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Recommend using with 18v cordless drill set on screw setting. 2-1/4″ cutting depth. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off .

 

BLUE BOAR 2-14 57mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 2-1/4″ (57mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2-1/4″ (57mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - 2-1/4″ cutting depth. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Recommend using with 18v cordless drill set on screw setting.

 

BLUE BOAR 3-38 86mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 3-3/8″ (86mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 3-3/8″ (86mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Recommend using with 18v cordless drill set on screw setting. 2-1/4″ cutting depth. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off .

 

BLUE BOAR 3-18 80mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 3-1/8″ (80mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 3-1/8″ (80mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - 2-1/4″ cutting depth. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Recommend using with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included.

 

BLUE BOAR 1-34 44mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 1-3/4″ (44mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 1-3/4″ (44mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Unique tungsten carbide tooth design wide kerf allows fast plug removal. 2-1/4″ cutting depth best when used with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws.

 

BLUE BOAR 3-12 89mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 3-1/2″ (89mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 3-1/2″ (89mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Recommend using with 18v cordless drill set on screw setting. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth.

 

BLUE BOAR 2-116 52mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 2-1/16″ (52mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2-1/16″ (52mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. 2-1/4″ cutting depth. Recommend using with 18v cordless drill set on screw setting.

 

BLUE BOAR 4-14 108mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 4-1/4″ (108mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 4-1/4″ (108mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Recommend using with 18v cordless drill set on screw setting. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. 2-1/4″ cutting depth. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off .

 

7 Pc Deep Hole Saw Set

7 Pc Deep Hole Saw Set

7 Pc Deep Hole Saw Set - Cut a perfect circular hole in wood of varying thickness. Durable metal blade housing. 1/4″ shank fits most all electric drills. Blade diameter 1″ to 2-1/2″. 7pc circular tempered 65mm steel blades complete with plug remover.

 

BLUE BOAR 5-14 133mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 5-1/4″ (133mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 5-1/4″ (133mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth. Recommend using with 18v cordless drill set on screw setting. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off .

 

BLUE BOAR 2 51mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 2″ (51mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 2″ (51mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off . Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. 2-1/4″ cutting depth. Mounts to all standard 5/8″-18 2-pin hole saw arbor adapters, arbor and pilot bit not included. Recommend using with 18v cordless drill set on screw setting.

 

2 Bi-metal Deep Hole Saw

2″ Bi-metal Deep Hole Saw

2″ Bi-metal Deep Hole Saw - Never let your drill bit run dry use water to keep the tool cool. Cuts perfectly round holes without chipping or breaking the material. Great for drilling holes in tiles, glass, fish tanks, marble, granite, ceramic, porcelain, bottles. Use with standard electric or battery drillers. Diamond hole saw drill bit 6mm x 1pc, 8mm x 2pcs, 10mm x 2pcs, 12mm x 2pcs, 14mm x 1pc, 16mm x 2pcs, 18mm x 1pc, 20mm x 2pcs, 25mm x 1pc, 30mm x 1pc, 35mm x 1pc glass and tile drill bit 6mm x 1pc, 8mm x 1pc, 10mm x 1pc, 12mm x 1pc.

 

BLUE BOAR 34 19mm MEGA Tungsten Carbide 2-14 deep hole saw

BLUE BOAR 3/4″ (19mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw

BLUE BOAR 3/4″ (19mm) MEGA Tungsten Carbide 2-1/4″ deep hole saw - Unique tungsten carbide tooth design wide kerf allows fast plug removal. 2-1/4″ cutting depth recommend using with 18v cordless drill set on screw setting. Tct hole cutters cut holes up to 10x faster and last up to 15x longer than bi-metal hole saws. Use any 1/2″-20 thread hole saw arbor and any standard 3-3/4″ or longer pilot bit. Not for use with 1/2″ stud drills such as milwuakee hole hawg which will rip the teeth off .

 

IIT 56200 2-Inch Deep Hole Saw 7-Piece

IIT 56200 2-Inch Deep Hole Saw, 7-Piece

IIT 56200 2-Inch Deep Hole Saw, 7-Piece - . Made for quality results. This pack of 3piece, 1/2″ detail & edge brushes works efficiently with all water based paints.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.