Union Butterfield TN1534(UNC) High-Speed Steel Spiral Point Tap, Relieved Style, TiN Coated, Round Shank With Square End, Plug Chamfer, #6-32 Thread Size
- Relieved-style design with eccentric, full-pitch diameter thread relief for free cutting and reduced tool wear. Spiral point tap with straight flutes for cutting threads in through holes. Plug chamfer for easier starting and correct perpendicular alignment. Spiral point tap pushes chips ahead of tool to reduce clogging. Titanium nitride (tin) coating combines hardness with low friction for extended tool life and faster cutting.
Union Butterfield 1534NR(UNC) High-Speed Steel Spiral Point Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H2 Tolerance, #2-56 Thread Size
- Available in unc (unified coarse), unf (unified fine), or uns (unified special) right-hand thread options for different applications. Non-relieved design for applications requiring close gauging fits, for manual feed rate applications, or for use on older equipment. Spiral point with straight flutes for cutting threads in through holes. Spiral point tap pushes chips ahead of tool to reduce clogging. Round shank with square end helps to minimize rotation in the tool holder.
Spiral Point Tap, Plug, S/O, M8x1.25
- 25mm, metric, pitch diameter limits d9, standard projection, shank diameter 0. Spiral point tap comes with plug type and high performance style, high speed steel-e material with steam oxide finish, number of flutes 3, size m8, pitch 1. 318″, idea for use in stainless steels, tolerance 6h, ansi standards 342, high-performance hss spiral point taps for use with through holes in difficult materials. .
Kodiak Cutting Tools KCT207722 USA Made Spiral Point Plug Tap, 2 Flute, #8 Diameter x 32 TPI, Ground Threads, High Speed Steel, 8-32 Size
- 8-32 spiral point tap. . 168″ shank 3/4 thread length 2-1/8″ overall length 2 flute spiral point threading tap.
Chicago Latrobe GT18 High-Speed Steel Jobber Length Drill Bit and Spiral Point Tap Set with Metal Case, Uncoated (Bright) Finish, 18-piece, Wire Size, Letter, Inch, #6-32 to 1/2″-13 Tap Sizes
- Set contains 9 jobber length drill bits, including wire gauge sizes #36, #29, #25, #21,and #7 letter sizes f and u and inch sizes 5/16″ and 27/64″. Set contains 9 spiral point taps, including thread sizes 6-32 unc, 8-32 unc, 10-24 unc, 10-32 unf, 1/4″-20 unc, 5/16″-18 unc, 3/8″-16 unc, 7/16″-14 unc, and 1/2″-13 unc. High-speed steel (hss) provides hardness for wear resistance. 118-degree conventional point on the drill bit for a range of drilling applications. Uncoated (bright) finish provides an untreated surface.
Dormer E006M6 Spiral Point Taps, AlTiCN Coating, M6, Metric Coarse/Metric Fine, Full Length 2.1/2″, Flute Length 0.5075″, Shank Diameter 0.2550″
- Spiral point pushes chips ahead of tool to reduce clogging. Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. Spiral point and straight flutes for cutting threads in through holes. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Plug chamfer for easier starting and correct perpendicular alignment.
Union Butterfield 1785M High-Speed Steel Spiral Point Tap, Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M2-0.40 Thread Size
- Spiral point tap pushes chips ahead of tool to reduce clogging. Relieved-style design reduces friction between tap and workpiece for reduced tool wear. Plug chamfer for easier starting and correct perpendicular alignment. Produces ansi standard right-hand threads in metric sizes. Spiral point with straight flutes for cutting threads in through holes.
Union Butterfield 1534(UNF) High-Speed Steel Spiral Point Tap, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, H2 Tolerance, #6-40 Thread Size
- Spiral point and straight flutes for cutting threads in through holes. Relieved-style design with eccentric, full-pitch diameter thread relief for free cutting and reduced tool wear. Round shank with square end helps to minimize rotation in the tool holder. Available in unc (unified coarse) and unf (unified fine) right-hand thread options for different applications. Spiral point tap pushes chips ahead of tool to reduce clogging.
HHIP 1011-6014 2-56NC H2 2 Flute Spiral Point Tap-Plug
- ~ Ground from solid. ~ high speed steel. 2-56nc h2 2 flute spiral point plug tap ~ ground thread. .
Dormer E005M83FL Spiral Point Taps, M8, Metric Coarse, Full Length 2.23/32″Flute Length 0.5939″, Shank Diameter 0.3180″
- Plug chamfer for easier starting and correct perpendicular alignment. Spiral point and straight flutes for cutting threads in through holes. Spiral point pushes chips ahead of tool to reduce clogging. Gold oxide finish reduces grinding stress within the tool. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel.
Dormer E0255/163FL Spiral Point Taps, Cobalt High Speed Steel, UNC5/16, Full Length 2.23/32″, Flute Length 0.5939″, Shank Diameter 0.3180″
- Available in unc (unified coarse) and unf (unified fine) right-hand thread options for different applications. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Gold oxide finish reduces grinding stress within the tool. Spiral point pushes chips ahead of tool to reduce clogging. Spiral point and straight flutes for cutting threads in through holes.
GUHRING 9039160035050 Spiral Point Tap, Plug, Cobalt, TiN Coating, 3 Flute, #6-32 Size
- . Using only premium substrate materials such as cobalt, powdered metal cobalt and carbide, guhring taps are designed to last longer and provide high quality thread results.
Spiral Point Tap, Plug, TiCN, #5-40
- 141″, ideal for stainless steel, tolerance 3b, ansi standards 300, high-performance hss spiral point taps for use with through holes in difficult materials. Spiral point tap comes with plug type and high performance style, high speed steel-e material with ticn finish, number of flutes 2, size #5, pitch 40, thread nc/unc, pitch diameter limits h2, standard projection, shank diameter 0.
GUHRING 9039070095250 Spiral Point Tap, Plug, Powered Metal Cobalt, TiN Coating, 3 Flute, 3/8″-16 Size
- . Using only premium substrate materials such as cobalt, powdered metal cobalt and carbide, guhring taps are designed to last longer and provide high quality thread results.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
