Carriage Thumb Screw with Washer for Hobart 1612 and 1712 Slicers
- Carriage thumb screw for hobart slicers. Replaces hobart part# c-108197-5 (thumb screw) and a-107364 (washer).
Hard-to-Find Fastener 014973323929 Thumb Screws, 1/4-20 x 1/2-Inch
- We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. . We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Hard-to-Find Fastener 014973323943 Thumb Screws, 1/4-20 x 1-Inch
- Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. We also sell coated and stainless products for additional rust resistance. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed building or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Vitamix 18005 Set Screws (2 Ea) Thumbscrews Fits Blending Station Models Vita Mix 69838
- 18005 thumbscrews set of (2) thumbscrews fits all blending station modelsfree shipping applies only to continental 48-states. This as well as all items in our store are brand new and factory fresh (unless listed under used equipment category. Manufacturer vita-mix model no. ).
Hobart SLICER THUMB SCREW 108197-5
- 108197-5. Hobart. Hobart part. Slicer thumb screw. 2nd day air shipping is available from global appliance.
Computer PC Case M3x6mm Knurled Head Phillips Thumb Screws 100pcs
- Product name thumb screws material metal weight 234g. Total length 13mm/ 05″ drive type phillips. Thread size m3 x 6mm(dl) phillips size 7mm/028″. Package content 100(+/-2%)pcs x phillips thumb screws main color silver tone. Pitch 05mm head size 8 x 7mm/03″ x 028″(dl).
Hoshizaki 434168G01 Hoshizaki Thumbscrew
- Genuine oem replacement part. Use genuine oem parts for safety reliability and performance. Hoshizaki is committed to developing original products that bring comfort and convenience to your life.
M3x6mm Plastic Head PC Case Phillips Thumb Screws Black 100pcs
- Pitch 05mm head size 9 x 9mm/035″ x 035″(dl). Package content 100(+/-2%)pcs x computer case thumb screws main color black, silver tone. Total length 16mm/ 06″ drive type phillips. Thread size m3 x 6mm(dl) phillips size 4mm/016″. Product name computer case thumb screws material plastic,metal weight 123g.
Tanz HAB-24 Caesar Hardware Worm Drive Hose Clamp with Thumb Screw
- The clamp’s band is made from stainless steel 304 material. They are suitable for a large number of uses and commonly used in industrial, electronic and automotive applications. This is commonly used in small diameter applications such as air & fuel lines, installation in tight fitting or difficult to reach areas. They are used to connect flexible hose to dust hoods, blast gates and fittings. Hose clamps attach hoses to fittings to prevent flow leakage. Tanz’s hose clamps have fine finish. The stainless steel material is ideal to be used in outdoor, fresh water and mildly corrosive applications.
Elzetta ZFH1500B-T AR15 Tactical Flashlight Holder with Thumbscrew, Matte Black
- 7 to 1. The glass-filled polymer provides outstanding durability, impact resistance, scratch resistance and light weight. The elzetta zfh1500 is made from an advanced glass-filled polymer. It also provides a more robust clamping mechanism while retaining the nut on the device. It also withstands high temperatures, vibration and most chemicals. 1 inch in diameter (18 to 27mm). This is the quick-release thumb screw model, which allows the flashlights to be installed and removed rapidly and without tools. The thumb screw model is highly recommended. Every elzetta zfh1500 comes with sizing adapters, giving the flashlight holder the ability to mount flashlights from.
Beisen Aluminum Double Thumb Screw Turn Patio Sliding Door and Window Lock (10 Pack)
- Easy installation with no tools required. Additional gripping power securely locks window in closed or ventilating position. Heavy-duty aluminum construction, inner vinyl lining prevents scratching damage. Utilizes double thumbscrews to mount on window or sliding door track. These slider locks are perfect for patio doors, sliding glass doors, sliding windows etc.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #8-32 x 3/4″ QTY 25
- Thread direction right hand. Thread pitch 32 per inch. Hardness 40-75 rockwell b. Body diameter (#8) max 01631, min 01571 (class 2a fit, ansi b11). Head diameter max 15/32″ head height 1/4″.
Steel Thumb Screw, Knurled Head, M6-1.0 Metric Coarse Threads
- Din 464 knurled thumb screws are machined from solid bar. . Rohs compliant. Knurled thumb screw body 12l14 steel, black oxide finish. Jw winco’s knurled thumb screw.
Stainless Steel Thumb Screw, Plain Finish, Knurled Head, Flat Point, 3/4″ Length, Fully Threaded, #10-24 UNC Threads (Pack of 5)
- Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads. Tools not necessary for tightening or loosening. Knurled head provides extra grip for manual tightening. Thumb screws allow for simple “by-hand” installation. Stainless steel is suitable where formability and cost are important considerations.
Knurled Head Thumb Screws – Solid Brass Machine Screws – #8-32 x 3/8″ QTY 25
- Hardness 40-75 rockwell b. Body diameter (#8) max 01631, min 01571 (class 2a fit, ansi b11). Head diameter max 15/32″ head height 1/4″. Thread direction right hand. Thread pitch 32 per inch.
Twenty (20) 1/4-20 x 1/2″ Length Knurled Plastic Head Thumb Screws – MADE IN USA
- Twenty (20) 1/4-20 thread x 1/2 (half) inch length thread thumbscrews. Great for computers and electronics. 1/2 inch long 1/4-20 threaded alloy screw. Free shipping / made in usa. 1 inch plastic knurled head.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
