Top 16 Slot Cutter Router Bits

 

Freud 63-108 Slot Cutter Router Bit Set, 2″ X 1/8″ - Highlights size 2″ x 1/8″ with 1/4″ shank depth 9/16″ over lenth 2-3/8″. Includes three wing slotting cutter, arbor and ball bearing, cuts all composition materials, plywoods, hardwoods, and softwoods, use on hand-held and table-mounted portable routers, producing slots and grooves for t-molding, spline joints, tongue and grove joints and other application.

 

Magnate 1145 Slot Cutter Router Bits, with Top Mounted Bearing – 5/32″ Cutting Length - It is precision ground, hardened, and tempered in order to stand up to a variety of materials. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is also equipped with wide open gullets for easy disposal of wood chips. Excessive overall length may cause tool damage. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.

 

Yonico 14191q T-Slot Cutter Router Bit for 10mm Hex Bolts with 1/4″ Shank - Industrial quality router bits. Build-up & heat resistant teflon coating. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed & lifetime warranty. Solid hardened steel bodies with anti-kickback design.

 

3/8 Inch Hex Bolt Heads 1/4 Inch Shank T-Slot Cutter Router Bit for Wood - Suitable for hand held electric drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Hardened and tempered,carbon steel construction. Used for wood perforation,spherical door tip installation,drawer tip,plastic products,wood,plywood,etctrepanning more smooth,less noise. Sharp edge,high hardness,accurate positioning,high precision,smooth cutting,impact resistance,high toughnessenable woodworkers to drill holes without passing through the material when a clean and precise bottom to a hole. Selection of high quality alloy blade,make blade more sharp and durable,it’s head adopt arc curve design,beneficial to chip removal, perforation is more efficient.

 

Magnate 1111 Slot Cutter Router Bits – 3/8″ Cutting Length; 3/8″ Cutting Depth; 1/2″ Shank Diameter - You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Excessive overall length may cause tool damage. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

MLCS Stackable Slot Cutter Router Bit Set with 1/2″ Arbor - Versatile, carbide tipped three-wing stackable slot cutter set cuts a wide variety of grooves. Individual cutters can also create precisely-sized grooves and you can purchase additional bearings to adjust the depth of cut. Simply adjust the arrangement of the cutters and shims on the 1/2″ arbor to create a wide variety of groove sizes for dadoes, tongue and groove joints, rabbets, or biscuit joints. Storage box included. With the included 6 carbide-tipped slot cutters (1/16″, 3/32″, 1/8″, 5/32″, 3/16″, & 1/4″), shims, and bearing (7/8″ od x 5/16″ id) for 1/2″ cut depth, almost any groove from 1/16″ to 11/16″ can be created.

 

Workshop Tools 1/2″ Slot Cutter Router Bit w/ 1/2″ Shank – 09017 - All of workshop tools router bits come with a limited lifetime warranty. Cutting slots on a router table has definite advantages over doing them on a table saw. Another great feature of our bits is that they are anti-kickback, meaning they have more body mass which minimizes the risk of kickback by preventing the bit from biting too deeply and catching the material. For one, you’ll get perfect flat-bottomed cuts, something not all saw blades can do. Slot cutting bits are ideal for making slots and grooves for t-moldings, spline joints, ship lap joints, and tongue and groove joints. Our bits also come with carbide tipped blades, which are harder than steel and will hold an edge 10 to 25 times longer. Make slots and grooves, spline joints, tongue and groove joints cuts softwoods, hardwoods, plywood and most composite materials carbide tipped blades anti-kickback 2 flutes width of cut 1/2″ depth of cut 3/8″ large diameter 1-1/4″ overall length 1-3/4″ shank 1/2″ d x 1-1/8″ l. This enlarged body also increases the dissipation of heat and keeps the bits sharp longer. And, because they cut horizontally, creating slots in the edges of extremely wide stock is far easier and safer than attempting to balance the work-piece vertically against the fence on your table saw.

 

Woodshopbits V-Point Slot Cutter Router Bit – SHK 1/2 | D 1 | DG 90 degree | H 1 - . It is often used for decorative designs and other slot cutting applications. Various passes should be used if cutting the deeper slots. Buy this bit and get an additional bit free legend below explains sizing. . Select your item(s) then click add to cart. Comes in a plastic case. Woodshopbits v-point slot cutter router bit is just that. It cuts a v-point but also can be used to cut a deeper v-pointed slot. A top quality bit at an amazing price satisfaction 100% guaranteed. The angle of this particular bit cuts a 90 degree v and a slot that is 1 inch wide.

 

YaeTek T-Slot Cutter Router Bit for 3/8-Inch Hex Bolt Heads 1/4-Inch Shank - Our router bits are manufactured using solid hardened steel and c3 micro grain carbide. Our bits are the preferred choice of professionals and hobbyists alike. Precise, designer profiles create smooth and detailed cuts, perfect for projects of any level of complexity. (C3 grade carbide is the highest grade used in the router bit industry) the result is a highly durable bit that can be utilized for the most rigorous industrial applications.

 

Yonico 14191q T-Slot Cutter Router Bit for 10mm Hex Bolts with 1/4 Shank by Yonico - Industrial quality router bitsc3 micro-grain tungsten carbide cutterssolid hardened steel bodies with anti-kickback designbuild-up & heat resistant teflon coatingsatisfaction guaranteed & lifetime warranty.

 

Magnate 1101 Slot Cutter Router Bits – 1/8″ Cutting Length; 3/8″ Cutting Depth; 1/4″ Shank Diameter - Excessive overall length may cause tool damage. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips. You may try the following suggestion. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications.

 

Magnate 1112 Slot Cutter Router Bits – 1/2″ Cutting Length; 3/8″ Cutting Depth; 1/2″ Shank Diameter - Excessive overall length may cause tool damage. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. In case a bit doesn’t come with a speed chart. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is also equipped with wide open gullets for easy disposal of wood chips.

 

Woodtek 921537, Router Bits, Slot Cutters, 1/8″ 4-Wing Slot Cutter Only, 5/16″ Bore - Woodtek® carbide-tipped three and four wing slot cutter router bits cut precision slots for spline joints, t-molding and other applications, use with hand-held and table-mounted portable routers (1/4″ and 1/2″ arbors fit only woodtek® slot cutters) rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Large selection of complete bits or component parts. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Cnc-machining to +/-0. Manufactured in facilities meeting stringent iso 90002000 quality assurance standards. Imported. Positive shear angle places less demand upon your routing equipment.

 

MLCS 8371 Stackable Adjustable Slot Cutter Router Bit Set with 1/2″ Shank - Cuts almost any groove size from 1/16″ to 11/16″. Cut grooves for dadoes, tongue and groove joints, rabbets, or biscuit joints. 6 slot cutters, shims, bearing, and 1/2″ arbor included. Wood storage box included. Mlcs quality.

 

T-Slot Cutter Router Bit for 1/4″ Hex Bolt – 1/4″ Shank – Yonico 14190q - Description great for your custom jig creations, the yonico 14190q t-slot router bit cuts t-slots f. 21/32″ cutting height 3/8″ shank diameter 1-1/2″ shank length.

 

Magnate 6062 Slot Cutter Router Bits, For Demountable Hinge – 5/64″ Radius; 1-1/8″ Large Diameter - You may try the following suggestion. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. It is suited for softwoods, hardwoods, chipboard, plywood and etc. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness run 24,000 rpm maximum for 1″ overall diameter router bits run 18,000 rpm maximum for 1-1/4″ overall diameter router bits run 16,000 rpm maximum for 2-1/4″ to 2-1/2″ overall diameter router bits run 12,000 rpm maximum for 3″ to 3-1/2″ overall diameter router bits. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. In case a bit doesn’t come with a speed chart. It is also equipped with wide open gullets for easy disposal of wood chips.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.