Top 18 Steel Band Saw Blades

 

Magnate M59.25C38R24 Carbon Tool Steel Bandsaw Blade, 59-1/4″ Long – 3/8″ Width; 24 Raker Tooth - Carbon tool steel bandsaw blades are made from high end carbon steel. E. 11-1/4 inch, 4′ 11-1/4″ ) bandsaw blades suit the following models ryobi bs903 (59-1/4″ to 59-1/2 ) black & decker, 9411 sears craftsman skil 9″, 3381-01 tradesman 9″pro-tech 9″ collins 9″ toolkraft 4500, 4502 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. It can cut all types of woods and is especially ideal for soft woods i. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 59-1/4 inch ( 4 ft. The picture depicted represents one blade the pricing is for one blade/package. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available,. E.

 

Magnate M107C14R24 Carbon Tool Steel Bandsaw Blade, 107″ Long – 1/4″ Width; 24 Raker Tooth - 11 inch, 8′ 11″ ) bandsaw blades suit the following models grizzly g1011, 8145z (105-1/4 to 109-1/4) dayton 5z023 emerson 10-1700, 10-1701 jet hvbs-712 rigid 970 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 107 inch ( 8 ft. Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. It can cut all types of woods and is especially ideal for soft woods i. 2, if the owner’s manual is not available, refer to previous invoices. It is also used for cutting plastics, aluminum, metals, and mild steel. 3, cut your old bandsaw bla. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel.

 

Magnate M92C14R10 Carbon Tool Steel Bandsaw Blade, 92″ Long – 1/4″ Width; 10 Raker Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 2, if the owner’s manual is not available, refer to previous invoices. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Steel). It is also used for cutting plastics, aluminum, metals, and mild steel. This method will provide the mos. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92 inch ( 7 ft. E. It can cut all types of woods and is especially ideal for soft woods i. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. 8 inch, 7′ 8″ ) bandsaw blades suit the following models enco 199-9001 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M72C12R24 Carbon Tool Steel Bandsaw Blade, 72″ Long – 1/2″ Width; 24 Raker Tooth - It is also used for cutting plastics, aluminum, metals, and mild steel. The picture depicted represents one blade the pricing is for one blade/package. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. , 6′ ) bandsaw blades suit the following models shopsmith 10 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. This method will provide the most possible. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M99.75C12H4 Carbon Tool Steel Bandsaw Blade, 99-3/4″ Long – 1/2″ Width; 4 Hook Tooth - Blade has 4-teeth per inch. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. For wood or metal cutting 1/2″ width 4 hook tooth 0025″ thickness 0049″ kerf. Cones with a 30-day limited warranty. Comes with a 30-day limited warranty. Provides long tooth life and exceptional durability. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw.

 

Magnate M70.5C12R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 1/2″ Width; 24 Raker Tooth - The picture depicted represents one blade the pricing is for one blade/package. Steel). Pine, polar, fir and spruce. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Carbon tool steel bandsaw blades are made from high end carbon steel. E. It can cut all types of woods and is especially ideal for soft woods i. 3, cut your old bandsaw blade so that it lies flat on a level sur. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. E. It is also used for cutting plastics, aluminum, metals, and mild steel. 2, if the owner’s manual is not available, refer to previous invoices. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.

 

Magnate M72C38H6 Carbon Tool Steel Bandsaw Blade, 72″ Long – 3/8″ Width; 6 Hook Tooth - In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. Carbon tool steel bandsaw blades are made from high end carbon steel. , 6′ ) bandsaw blades suit the following models shopsmith 10. Steel). Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. E. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. The type of tooth pattern used depends on the thickness of metal material to be cut. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72 inch ( 6 ft. Pine, polar, fir and spruce.

 

Magnate M80C38R24 Carbon Tool Steel Bandsaw Blade, 80″ Long – 3/8″ Width; 24 Raker Tooth - 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. The picture depicted represents one blade the pricing is for one blade/package. Carbon tool steel bandsaw blades are made from high end carbon steel. Pine, polar, fir and spruce. 2, if the owner’s manual is not available, refer to previous invoices. It can cut all types of woods and is especially ideal for soft woods i. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. E. Steel). Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. E. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft.

 

Magnate M72.5C12H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/2″ Width; 6 Hook Tooth - 1/2 inch, 6′ 1/2″ ) bandsaw blades suit the following models delta 28-195, bs150ls skil hd 3640 ryobi bs50n dremel 1120 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72-1/2 inch ( 6 ft. It is also used for cutting plastics, aluminum, metals, and mild steel. Pine, polar, fir and spruce. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Steel). The picture depicted represents one blade the pricing is for one blade/package. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i. E. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. 2, if the owner’s manual is not available, refer to previous invoices. Carbon tool steel bandsaw blades are made from high end carbon steel. 3, cut your old bandsaw blade so that it lies flat on a level surface,.

 

Magnate M92.5C316R10 Carbon Tool Steel Bandsaw Blade, 92-1/2″ Long – 3/16″ Width; 10 Raker Tooth - Pine, polar, fir and spruce. Carbon tool steel bandsaw blades are made from high end carbon steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 92-1/2 inch ( 7 ft. The picture depicted represents one blade the pricing is for one blade/package. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It is also used for cutting plastics, aluminum, metals, and mild steel. E. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It can cut all types of woods and is especially ideal for soft woods i. Steel). E. 8-1/2 inch, 7′ 8-1/2″ ) bandsaw blades suit the following models jet j-8203k powerline mark 1 shopcraft 28-283f mit 5125 american industrial amt 4113 enco 505-1372 (models 8201, 8203, 8201vs and 8203vs), 199-9013, 199-9011, 199-9001 dayton 3z981 central machinery 32206-ocea, 32208-ocea, 5687-ocea, 2146-3bmf, 00580-ocea nu-mark 14″ united 14″ wilton tradesman 8201, 8203, 8201vs, 8203vs grizzly g0580x g0555x (92-1/2″ to 93-1/2″) 14″ ohio fo.

 

Magnate M80C14R14 Carbon Tool Steel Bandsaw Blade, 80″ Long – 1/4″ Width; 14 Raker Tooth - Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. It can cut all types of woods and is especially ideal for soft woods i. E. Carbon tool steel bandsaw blades are made from high end carbon steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 80 inch ( 6 ft. 8 inch, 6′ 8″ ) bandsaw blades suit the following models sears craftsman 9ht2433n, 9ht2331n, 2428, 24331n, 24393n industrial 12″, 113 angle head atlas general international 90-060 m1 (woodworking) if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. 2, if the owner’s manual is not available, refer to previous invoices. The picture depicted represents one blade the pricing is for one blade/package. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. Steel).

 

Magnate M70.5C38R24 Carbon Tool Steel Bandsaw Blade, 70-1/2″ Long – 3/8″ Width; 24 Raker Tooth - Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. 10-1/2 inch, 5′ 10-1/2″ ) bandsaw blades suit the following models craftsman 10″ 921400 atlas workshop 9360, 912 rikon 10-305 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. E. Carbon tool steel bandsaw blades are made from high end carbon steel. Steel). Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 70-1/2 inch ( 5 ft. The picture depicted represents one blade the pricing is for one blade/package. 2, if the owner’s manual is not available, refer to previous invoices. It can cut all types of woods and is especially ideal for soft woods i. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. E. 3, cut your old bandsaw blade so that it lies flat on a level sur. It is also used for cutting plastics, aluminum, metals, and mild steel. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced.

 

Magnate M62C12H3 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/2″ Width; 3 Hook Tooth - For wood or metal cutting 3/8″ width 24 raker tooth 0025″ thickness 0049″ kerf. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. For wood or metal cutting 3/16″ width 14 raker tooth 0025″ thickness. For wood or metal cutting 1/2″ width 3 hook tooth 0025″ thickness. Cones with a 30-day limited warranty. Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw.

 

Magnate M89.5C14H6 Carbon Tool Steel Bandsaw Blade, 89-1/2″ Long – 1/4″ Width; 6 Hook Tooth - Carbon tool steel bandsaw blades are made from high end carbon steel. E. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Pine, polar, fir and spruce. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. This method wi. It is also used for cutting plastics, aluminum, metals, and mild steel. 3, cut your old bandsaw blade so that it lies flat on a level surface, and measure its length. Steel). 5-1/2 inch, 7′ 5-1/2″ ) bandsaw blades suit the following models sears craftsman 12″ if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 89-1/2 inch ( 7 ft. It can cut all types of woods and is especially ideal for soft woods i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. The picture depicted represents one blade the pricing is for one blade/package. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. 2, if the owner’s manual is not available, refer to previous invoices. E.

 

Magnate M113C12H6 Carbon Tool Steel Bandsaw Blade, 113″ Long – 1/2″ Width; 6 Hook Tooth - For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. For wood or metal cutting 3/16″ width 14 raker tooth 0025″ thickness. For wood or metal cutting 1/2″ width 3 hook tooth 0025″ thickness. For wood or metal cutting 1/8″ width 18 raker tooth 0025″ thickness 0047″ kerf. For wood or metal cutting 3/8″ width 24 raker tooth 0025″ thickness 0049″ kerf. Cones with a 30-day limited warranty. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. For wood or metal cutting 1/2″ width 6 hook tooth 0025″ thickness 0049″ kerf.

 

Magnate M67.5C14H4 Carbon Tool Steel Bandsaw Blade, 67-1/2″ Long – 1/4″ Width; 4 Hook Tooth - Pine, polar, fir and spruce. It can cut all types of woods and is especially ideal for soft woods i. E. In order to cut metal materials, the following is a guideline for choosing the adequate tooth pattern of a carbon tool steel bandsaw blade. Use 24 raker to cut 1/16″ to 1/4″ thick material, use 18 raker to cut 1/8″ to 3/8″ thick material, use 14 raker to cut 3/16″ to 7/16″ thick material, use 10 raker to cut 1/4″ to 5/8″ thick material, use 6 hook to cut 3/8″ to 2″ thick material, use 4 hook to cut 3/4″ to 4-1/2″ thick material, use 3 hook to cut 1″ to 6″ thick material, use 2 hook to cut 2″ to 12″ thick material, note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Carbon tool steel bandsaw blades are made from high end carbon steel. The type of tooth pattern used depends on the thickness of metal material to be cut. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. There may be a number of other bandsaws or models that use the same blade lengths as the ones listed 67-1/2 inch ( 5 ft. All bandsaw blades are folded into 3 rings to avoid bulky packaging, the picture depicted represents one blade the pricing is for one blade/package. E. Steel). Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. It is also used for cutting plastics, aluminum, metals, and mild steel. 7-1/2 inch, 5′ 7-1/2″ ) bandsaw blades suit the following models 10″ rikon 10-300 jet jwbs-10os.

 

Magnate M72.5C14H6 Carbon Tool Steel Bandsaw Blade, 72-1/2″ Long – 1/4″ Width; 6 Hook Tooth - 2, if the owner’s manual is not available, refer to previous invoices. Note the owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Pine, polar, fir and spruce. 1/2 inch, 6′ 1/2″ ) bandsaw blades suit the following models delta 28-195, bs150ls skil hd 3640 ryobi bs50n dremel 1120 if in doubt, to determine bandsaw blade length 1, check the owner’s manual of your bandsaw machine for specifications, not only the length, but also the range of the width and thickness. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 hook to cut 3/8″ to 2″ thick material, 4 hook to cut 3/4″ to 4-1/2″ thick material, 3 hook to cut 1″ to 6″ thick material, 2 hook to cut 2″ to 12″ thick material, there may be a number of other bandsaws or models that use the same blade lengths as the ones listed 72-1/2 inch ( 6 ft. It is also used for cutting plastics, aluminum, metals, and mild steel. It can cut all types of woods and is especially ideal for soft woods i. E. Carbon tool steel bandsaw blades are made from high end carbon steel. E. Steel). 3, cut your old bandsaw blade so that it lies flat on a level surface,. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i. The picture depicted represents one blade the pricing is for one blade/package.

 

Magnate M62C14R24 Carbon Tool Steel Bandsaw Blade, 62″ Long – 1/4″ Width; 24 Raker Tooth - Replacement blade for hitachi model cb75f 14-1/2-inch resaw band saw. For wood or metal cutting 1/4″ width 24 raker tooth 0025″ thickness. Blade has 4-teeth per inch. Provides long tooth life and exceptional durability. Replacement blade for hitachi cb75f 14-1/2inch resaw band saw. Cones with a 30-day limited warranty. This blade has 4 teeth per inch. Comes with a 30-day limited warranty.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.