Huot Combination Tap and Drill Bit Index for Tap Sizes #6-40 to 1/2″-20 (NF) and #6-32 to 1/2″-13 (NC) and Drill Bit Sizes #33 to 29/64″ (NF) and #36 to 27/64″ (NC)
- Labeled storage holes for identification and organization. Made in usa. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Index holds 36 taps and drill bits in tap sizes #6-40 to 1/2″-20 (nf) and #6-32 to 1/2″-13 (nc) and drill bit sizes #33 to 29/64″ (nf) and #36 to 27/64″ (nc).
CHANNELLOCK 80213 #6×32 NC Tap/Drill Set
- #6 x 32, national course tap & drill bit set, carbon steel, ideal for routine maintenance, repair work & for rethreading, straight flutes are ground to provide rapid chip removal for efficient threading, designed for hand threading work in a variety of materials includes 7/64inch drill bit. .
Huot Tap and Drill Bit Index for Metric Tap Sizes 2.5 mm x 0.45 mm to 12 mm x 1.75 mm and Metric Drill Bit Sizes 2.05 mm to 10.2 mm
- Made in usa. Labeled storage holes for identification and organization. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Meets iso 529 1975 standards. Index holds 18 taps and drill bits in metric tap sizes 25 mm x 045 mm to 12 mm x 175 mm and drill bit sizes 205 mm to 102 mm.
Inton M2 Material 6pcs HSS 1/4 Inch Hex Metric Deburr Countersink Titanium Coated Combination Drill Tap Bit Set M3-M10 (6pc titanium)
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole. Uses high speed steel 6542 material, higher hardness, more durable,can be used for drilling the steel plate even the 2mm 304 steel plate. Self-centering point, do not need assistant center drilling or center punching. Titanium coated, rust-proof. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. Welcome to inton store features high hardness, rustproof, solid and durable. Hss6542 (m2) is of higher hardness and more durable than the hss4341, and is suitable for cutting the steel even the 2mm 304 steel. The advantage is opening, tapping, chamfering. Package included 1x set (6pcs) hex shank tap drill bits.
RUIMI Drill Tap Combination Bit Deburr Countersink Screw Hole 1/4 Hex Shank 6 Pieces 1/8” – 3/8”
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor & time. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs carbon steel for longer life. Back tapered beyond tap to prevent thread damage from over-drilling. Hex shank hss drill bit & screw tap of imperial unit.
Vermont American 21698 13-Piece High Carbon Steel Tap and Drill Bit Set with Plastic Case
- Kit includes 1 plug tap of sizes 4/40″, 6/32″, 8/32″, 10/24″, 10/32″ and 1/4″-20 1 high speed drill bit of sizes for piloting taps #7, #21, #25, #29, #36 and #43, t-handle tap wrench and carry casematerial high carbon steel.
Greenlee DTAPKIT 6-32 to 1/4-20 6-Piece Combination Drill and Tap Set
- Designed to tap up to 10-gauge metal. Made from hardened high-speed steel vs carbon steel for longer life. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper.
Irwin Tools 80185 Tap (HCS) and Drill Bit Sets (HSS), 13-Pieces
- Includes plastic storage case. These drill and tap combinations produce a thread that is strong and easy to tap. Includes a plastic storage case. High-carbon steel plug taps are great for general-purpose threading. 135-degree split point hss drill bits ensure fast, precise drilling. Set pieces 6, 32 nc, 8, 32 nc, 10, 24 nc, 10, 32 nf, 12, 24 nc and 1/4″, 20 nc plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a t-handle tap wrench. This tap and drill bit set produces a thread that is strong and easy to tap. 135° split-point drill bits give fast, precise drilling. High carbon steel plug taps are ideal for general purpose threading.
GORCHEN Drill Tap Bit Combination Tool Kit Set Hex Shank Titanium Metric Deburr Countersink Bit HSS M3-M10
- Suitable for drilling and tapping in wood, plastic and soft metal like aluminum, copper, etc. Feature drill, tap and deburr/countersink in one operation, save time and efficient. Package one plastic storage case with 6 drill tap bits inside. Material hardened high speed steel 6542 with titanium coated, ensures durable sharp. Size m3 x 05, m4 x 07, m5 x 08, m6 x 1, m8 x 125, m10 x 15.
HHIP 1011-0018 18 Piece High Speed Steel Tap and Drill Combo Set
- Set includes 1 each hss hand tap(6-32 nc, 8-32 nc, 10-24 nc, 10-32 nf, 1/4″-20 nc, 5/16″-18 nc, 3/8″-16 nc, 7/16″-14 nc, 1/2″-13 nc) 1 each hss jobbers drill(#36, #29, #25, #21, #7, f, 5/16″ ,u, 27/64″). Made in usa with index steel case. High speed steel made taps and drills. Drills are matched with taps to make jobs much easier.
10-24 NC Tap No 21 Drill Bit Combo by Cz Garden Supply
- High carbon steel tap and drill bit combo sets are ideal for drilling the proper hole size and cutting interal threads. Only available from cz garden supply ™ uspto and amazon brand registry protected. Four-flute design for maximum chip clearance. Recommended drill size is permanently marked on each tap.
Bosch B44710 11 Piece Tap and Drill Set, Black Oxide
- Ideal for use with aluminum, mild steel and stainless steel. The drill bits included are one #36, #29, #25, #21, #7 and one t-handle wrench. The case included is a brute tough case. The taps included are one 6-32, 8-32, 10-24, 10-32, and one 1/4-20. The bosch b44710 black oxide tap and drill set includes 11 pieces.
CHANNELLOCK 1765536 #10×32 NF SA Tap/Drill
- #10 x 32, national course, self aligning tap & drill set, performance threading system self aligns tap in pre drilled hole especially in irregular surfaces or through holes, carbon steel, ideal for routine maintenance, repair work & for rethreading, straight flutes are ground to provide rapid chip removal for efficient threading, designed for hand threading work in a variety of materials, includes #21 drill bit. .
Yakamoz 6PCS SAE Drill Tap Combination Bit Set HSS M3-M10 Deburr Countersink Bit 1/4 Hex Shank Tool Kit
- Back tapered beyond tap to prevent thread damage from over-drilling. Complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency. Ideal for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc. High hardness, rustproof, solid and durable high-speed steel in quick-change 1/4″(635mm) hex shank. Self-centering point, do not need assistant center drilling or center punching.
Vermont American 21664 Size 10 x 32 NC Tap No 21 Drill Bit Combo
- Dimensions overall product weight -0. Use material -metal. Product type -screwdriver bits. 21664 features -for drilling the proper hole size and cutting internal threads. 01 pounds. -Four flutes for maximum chip clearance. -Produced to exacting specifications. Unit material -steel. -Drill size permanently marked on each tap. Use -drill bits.
Tap Drill Bit Kits,TFSeven 6Pcs HSS 1/4 Inch Hex Shank Combination Twist Drill Tap Bit Set UNC Metric M3-M10 Deburr Countersink Bits
- Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency. Applicable to some types of carbon steel and ordinary steel, copper and aluminum magnesium alloy drilling hole. Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time. Made from hardened high-speed steel vs carbon steel for longer lifeback tapered beyond tap to prevent thread damage from over-drilling. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc fast replacement composite cone, uses drill edged principle.
Kangnice 5Pcs/Set HSS Machine Hand Screw Thread Metric Plug Tap Drill Kit M3 M4 M5 M6 M8
- Thread diameter 3mm(m3)/4mm(m4)/5mm(m5)/6mm(m6)/8mm(m8). Size 3mm /4mm /5mm /6mm /8mm,. Cutting drill bits, professional set. Ideal for auto repair and machinery where metric threads are specified. Material high speed steel, quantity1 set(5pcs).
Huot Tap and Drill Bit Index for NF Tap Sizes #6-40 to 1/2″-20 and Drill Bit Sizes #33 to 29/64″
- Made in usa. Made of steel with an epoxy finish and has a snap-lock cover for durability and protection. Labeled storage holes for identification and organization. Index holds 18 taps and drill bits in tap sizes 6-40 to 1/2″-20 and drill bit sizes #33 to 29/64″.
Vermont American 21667 Size 1/4 x 28 NC Tap No 3 Drill Bit Combo
- Made in usa. Four flutes for maximum chip clearance. Produced to exacting specifications. For drilling the proper hole size and cutting internal threads. Fractional type of bolt/screw. Length 6. 25-28nf. Height 2. Includes carbon steel tap with matching high speed steel drill bit. Width 0. 6. Drill size permanently marked on each tap. Carded.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
