Top 20 Best Turning Tools

 

Authentic Easy Wood Tools Ci0 Round Carbide Replacement Cutter for Full and Pro Size Finishers Lathe Woodturning Tools Ci0 - Optimal grinding process produces the flattest and truest cutting surfaces. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely. The perfect grade of carbide produces the best combination of sharpness and durability. Authentic easy wood tools 100% manufactured in the usa by the leader in carbide insert lathe woodturnings technology. Ci0cutter designed to fit full and pro size finishers 625″ diameter by 110″ thick, 8-32 screw.

 

Hurricane Turning Tools, Woodturning Heavy Duty Right and Left Side 1 1/2″W x 3/8″ Curved Scraper Set, High Speed Steel - 7″ long hss tool with 16″ solid ash handle. Can be reground into the perfect negative rake scrapers. Heavy 1 1/2″ wide curved scrapers, 3/8″ thick, made from high speed steel (hss). 1 1/2″ right side curved scraper and 1 1/2″ left side curved scraper. Contains two different hurricane scrapers.

 

CNBTR 10mm Blue YT15 Alloy Carbide-Tipped Insert Lathe Turning Tool Cutting Tools Bit Set Pack of 9 - Cutting geometry parameters can be on-demand grinding. It is made of high speed steel material, have very good toughness and high hardness. Designed for solidly construction and long performence. Applicable to the general lathe, semi-automatic and automatic lathe, planer, cylindrical, end face, inner hole, thread, plane, steps, groove and cut off the process of processing.

 

Authentic Easy Wood Tools Ci2-R2 Carbide Replacement Cutter with 2″ Radius for Easy Start, Mini and Mid Midi Roughers Lathe Woodturning Tools Ci2-R2 - Authentic easy wood tools 100% manufactured in the usa by the leader in carbide insert lathe woodturnings technology. Optimal grinding process produces the flattest and truest cutting surfaces. Ci2-r2 cutter designed to fit easy start, mini and mid size roughers 430″ x 070″ 4-40 screw. The perfect grade of carbide produces the best combination of sharpness and durability. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely.

 

Hurricane Turning Tools, Woodturning Round Nose Scraper, High Speed Steel, 3/4″ Nose - Compare these tools to others that sell for two to three times the price. They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. These tools compare with any hss tool on the market and are sold throughout the world. Hurricane turning tools are made in one of the world’s largest turning tool factories. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. The handles are made from solid ash. Ships ready for you to final sharpen. This is the 3/4″ woodturning round nose scraper made from high speed steel.

 

Easy Wood Tools Full Size Easy Finisher Replaceable Carbide Insert Cutter Lathe Wood Turning Tool Gouge Scraper with Maple Hardwood Easy Grip Handle Model #4200 - Greatly simplifies learning curve when turning no complicated angle to learn and remember. Never sharpen again turn cutter 1/4 turn for sharp edge stays sharp many times longer than steel. Highest quality lathe woodturning tools 100% designed and manufactured in the usa. Accepts specially designed ci0 round proprietary replacement carbide cutter. 16″ maple handle 85″ by 1/2″ square cnc machined stainless steel bar 245″ overall length.

 

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles - It provides a superb grip on your woodturning projects such as bowls and platters. This is an outstanding quality chuck that compares to some of the “famous names” on the market. It is perfect if you only want one chuck and you switch between a mini lathe and a full size lathe. Available in several spindle threads to suit almost all lathes. If you are looking for a massive chuck for medium to super large bowls, check out the htc125 5″ chuck in our amazon store. Many optional jaw sets are available (sold separately) for various woodturning applications. It is a great size for full-size / midi and mini lathes. Please note that this chuck is the smaller in size of the two hurricane chucks. This is a 4″ chuck which compares in size to the oneway talon, novatech, etc chucks. We would like to introduce you to the hurricane htc100 100mm 4 jaw self centering woodturning chuck.

 

HSS 1/8″ Diamond Parting Tool By Stone Mountain Turning Tools SM7082 - From the woodturner just starting out to the experienced craftsman, this wood turning tool are sure to satisfy your needs. The hardwood handles are 16″ long for better leverage and less fatigue when turning. The blades are made from high speed steel hardened to rc 62-64. This blade will stay sharp 6 time longer than carbon steel.

 

Package of 3 Full Size Replaceable Carbide Cutter Simple Woodturning Tools with Interchangeable Foam Grip Handle – Hollower, Rougher, Detailer - Simple turner and hollowertm, a great all around tool that’s the simplest turning & hollowing tool to master on the market today. Simple roughertm, for roughing and profiling 90° square cutter included with tool. Interchangeable lathe tool handle with foam grip. Simple 55° detailertm, for fine detail work. This package contains three american made simple wood turning toolstm shown in the pictures, plus the interchangeable lathe tool handle with foam grip.

 

Authentic Easy Wood Tools Ci4 Diamond Carbide Replacement Cutter for Easy Start, Mini, Mid, Full and Pro Size Detailers Lathe Woodturning Tools Ci4 - The perfect grade of carbide produces the best combination of sharpness and durability. Authentic easy wood tools 100% manufactured in the usa by the leader in carbide insert lathe woodturnings technology. Ci4 diamond carbide cutter fits all detailers 108″ x 390″ diameter x 100″ thick 4-40 screw. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely. Optimal grinding process produces the flattest and truest cutting surfaces.

 

Hurricane Turning Tools, Woodturning Diamond Parting Tool, High Speed Steel, 3/4 Inches x 3/16 Inches, High Speed Steel - The handles are made from solid ash. These tools compare with any hss tool on the market and are sold throughout the world. This is the 3/4″ x 3/16″ woodturning diamond parting tool made from high speed steel. Ships ready for you to final sharpen. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. Hurricane turning tools are made in one of the world’s largest turning tool factories. They are made out of m2 high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. Compare these tools to others that sell for two to three times the price.

 

Easy Start Rougher 3/8″ Carbide Woodturning Tool - You will find this tool invaluable for those smaller more intricate turnings, such as pens, ornaments and smaller bowls, as well as for roughing, finishing and detail work. The cutters are designed so that you do not have to “find the bevel” when turning. Simply advance the tool slowly into the workpiece and begin cutting straight in, or sweep the cutter from left to right, or right to left. The easy start rougher features a 3/8″ x 3-1/2″ long square steel tool bar with a protective black oxide finish, a 9″ maple handle with a traditional style grip, and best of all it utilizes genuine ewt replacement cutters, the same cutters that are used on the premium ewt mini tools. Proudly crafted in the usa, this rougher is part of the latest addition to the easy wood tools line, easy starttm tools, which allow woodturners of any skill level to begin using quality carbide tools at a low start-up cost.

 

Hurricane Turning Tools, Woodturning Three Piece Spindle Gouge Set, 1/4 Inches Flute, 3/8 Inches Flute, and 1/2 Inches Flute, High Speed Steel - They are made out of m2 high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. Ships ready to be sharpened. These tools compare with any hss tool on the market and are sold throughout the world. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. Compare these tools to others that sell for two to three times the price. Hurricane turning tools are made in one of the world’s largest turning tool factories. The handles are made from solid ash. Each spindle gouge is made from high speed steel. This set set consists of three separate woodturning spindle gouges. .

 

Woodcraft Turning Tool Roll - When it’s time to store or transport your valuable turning tools, just roll them up in this water resistant case, snug up the two straps, grab the convenient carrying handle and go. Our exclusive new tool roll provides a place to keep and protect up to 12 full-sized turning tools. The woodcraft turning tool roll will hold most full sized turning tools up to 28″ long. .

 

Authentic Easy Wood Tools Ci1-R2 Square Carbide Replacement Cutter with 2″ Radius for Full and Pro Size Roughers Lathe Woodturning Tools Ci1-R2 - The perfect grade of carbide produces the best combination of sharpness and durability. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely. Ci1-r2 cutter designed to fit full and pro size roughers 580″ square by 100″ thick, 8-32 screw. Authentic easy wood tools 100% manufactured in the usa by the leader in carbide insert lathe woodturnings technology. Optimal grinding process produces the flattest and truest cutting surfaces.

 

Mid Size Package of 5 Carbide Simple Woodturning Tools with Interchangeable Handle for Wood Lathe (Red Metallic Handle) - American made in st michael, minnesota. 5 carbide tipped woodturning lathe tools with handle of your color choice. Tools are 3/8″ solid steel nickel plated overall length is 9″. Each tool comes with a carbide cutter and screw. Solid aluminum handle is 12″ overall length with outside diameter of 1-1/8.

 

Tormek SVD-186 Turning Tool Sharpener Gouge and Turning Cutter Jig That Makes Repeatable, Precise Sharpening Easy - This is an aftermarket of generic part. Maximum width of blade is 1-3/8 inch. Can be used for various lengths on the side bevel. Quickly produce a repeatable razor edge. This is a tormek replacement part. Part number n/a. Made for fingernail shaped turning gouges. Can also be used for bent carving gouges and v-tools.

 

Savannah 3 Piece Large Carbide Turning Tool Set - All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. 99 each. The comfortable rubber grip helps reduce hand fatigue while turning. The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Once the cutter head is completely used, simply replace it with a new carbide cutter. The solid carbide stays sharper for a longer period of time in comparison to steel tools. To make turning even more enjoyable, the shaft of the savannah carbide turning tool also features a flat back for stability while your turning. With the savannah large carbide turning tool, you can get right to turning without all the fuss. The savannah large carbide turning tools are designed with ease of use in mind. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. It is ideal for wood turners of all skill levels and helps ensure success right from the start. Set includes the large round (# 7537), square (# 7538) and diamond (# 7539) cutter tools, each of which can be purchased separately for $89.

 

Hurricane Turning Tools, Woodturning 8 Piece Turning Tool Set – Bowl Gouge, Scraper, Roughing Gouge, Lathe Chisel Set - The usable tool length of the spindle gouge is 3″ the usable tool length of 3/4″ scraper is 5″ the usable tool length all other tools is 6″. This set is ideal because it contains 8 tools that you will actually use, rather than other sets which include tools you will never use. The overall length of the parting tool is 16″ the overall length of the bowl gouge is 24″ the overall lengths of the skew chisel, scrapers, spindles gouge, and roughing gouge is 18″. This is the perfect set of turning tools for someone getting started. The handles are made from solid ash. Compare these tools to others that sell for two to three times the price. These tools compare with any hss tool on the market and are sold throughout the world. They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. Hurricane turning tools are made in one of the world’s largest turning tool factories. Ships ready to be sharpened. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. The model numbers for the set are listed above.

 

Interchangeable Foam Grip Handle for Full Size Carbide Tipped Simple Wood Turning Tools - The american made interchangeable turning tool handle accepts all full size simple wood turning tools, or other tools with a 1/2″ diameter tang. Tools are easily changed by loosening the two stainless steel allen set screws. Overall length 17″. Comfortable foam rubber grip over a solid aluminum core. Outside diameter 1-3/8″.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.