Bosch HDG418 4-1/8″ 105mm Diamond Grit Hole Saw
- These products are part of the patented quick change universal hole saw system. Longer life than competitive products. Features vacuum brazing technology for faster cutting.
Bosch HDG114 1 1/4″ 32mm Diamond Grit Hole Saw
- Intergral quick change adaptor- change holesaw sizes and types in seconds and remove material plugs easily. Segmented teeth, reduces debris and heat build-up. Fast and easy starts, even in the hardest tile. Vacuum brazed diamond grit, faster cutting and longer life.
Lenox Tools 2996464CG Master-Grit Carbide Grit Hole Saw, 4-Inch or 102mm
- Heat resistant carbide teeth for long life in tile and stainless steel. Hole saw has a clean-cutting carbide grit edge that won’t snag or chip when cutting thin materials. Carbide grit hole saw cuts through a wide range of abrasive materials. Use the hole saw with a 2l or 7l standard arbor or a 2l snap-back arbor. 4-inch diameter.
Bosch HDG1 1″ 25mm Diamond Grit Hole Saw
- Vacuum brazed diamond grit, faster cutting and longer life. Intergral quick change adaptor- change holesaw sizes and types in seconds and remove material plugs easily. Fast and easy starts, even in the hardest tile. Segmented teeth, reduces debris and heat build-up.
Mounting Pads for 1-3/8 in. Diamond Grit Hole Saw (12-Pack)
- Double-sided design provides leak-resistant adhesion. Used with the brutus diamond hole saw (not included), to mount the saw’s water cooling system to the wall being drilled. Double-sided design provides leak-resistant adhesion (includes 12 tape pads).
Exchange-a-Blade 2055005 Stay Sharp 1-1/4-Inch (32mm) Diamond Grit Hole Saw
- Drill clean, accurate holes in ceramic, marble, glass, fiberglass and hardier-plank. Measures 1-1/4 inches diameter. For use with handheld or press drills. Includes drilling template wet cutting only. High grade diamonds ensure long life.
Bosch HDG158 1-5/8″ 41mm Diamond Grit Hole Saw
- Bosch -inchspeed for wood-inch blades are an economical choice for fast cutting and sizing of wood and wood products. T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models. High carbon steel construction for long life.
Bastex,Diamond Grit Hole Saw Bit Drill Set (3pc). Includes 6 mm,8 mm, & 10 mm” bit sizes,designed for cutting Ceramic Tile Marble Glass Porcelain and most hard surfaces.
- Cuts clean, perfectly round holes to a depth of approximately 7/8 inches. For use on wood, porcelain, glass, tile, ceramics, stone, masonry, granite and other hard surfaces. Nickel-plated with a diamond dust coating offers superior performance and cutting strength. 1/8″-inch shanks attaches to any power drill to cut round holes in glass, marble and other materials.
Bosch HDG4 4″ 102mm Diamond Grit Hole Saw
- Longer life than competitive products. Features vacuum brazing technology for faster cutting. These products are part of the patented quick change universal hole saw system.
Bosch HDG334 3-3/4″ 95mm Diamond Grit Hole Saw
- Bosch all-purpose progressor blades offer fast, clean cuts through wood with nails, metals, particle board, and other materials. T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models. . Patented progressive tooth design produces fast cuts and long life in thick and thin materials.
Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8″ dia for 4 inch lights – fast cutting in drywall, CornHole, lath & plaster, Hardie board – easy plug removal, uses standard hole saw arbor adapter
- Attaches to standard 5/8″-18 2-pin mount hole saw arbor and works with hole pro xl-arbor/shield kit or hole pro x-230+ model. Cuts through drywall, plaster, cornhole board, fiber cement hardie board, stucco, acoustical tile, ceiling tile. Hard tungsten carbide grit edge for a long life in abrasive materials. Continuous cutting edge for smooth cutting even in wood lath and plaster. Open back design for faster cut plug removal.
Bosch HDG3 3″ 76mm Diamond Grit Hole Saw
- These products are part of the patented quick change universal hole saw system. Features vacuum brazing technology for faster cutting. Longer life than competitive products.
eBoot Diamond Drill Bit Coated Grit Hole Saw Set for Tile Granite Glass, 3/ 8 to 1 Inch, 5 Pieces
- Steel and nickel coated material these drill coated hole saws are made from steel and nickel coated material, the drill head is covered by diamond particles, sturdy. Diamond drill sizes diamond drill set includes 5 diameter of 3/ 8, 1/ 2, 5/ 8, 3/ 4, 1 inch, 5 cm and 55 cm in length, good quality diamond drilling tool set. Clean and accurate hole can drill a complete clean and accurate hole from hard surface, no broken edges and no tremor phenomenon, long service life, durable. Warm notice please add lubricants or water frequently to avoid sparks while using these coated grit hole saw set, can also enhance the working life by doing this. Multiple uses hole saw set can be applied on porcelain, glass, tile, ceramics, stone, granite and other hard surfaces, for most common standard electric drillers.
Bosch HDG14 1/4″ 6mm Diamond Grit Hole Saw
- Vacuum brazed diamond grit, faster cutting and longer life. Segmented teeth, reduces debris and heat build-up. Intergral quick change adaptor- change holesaw sizes and types in seconds and remove material plugs easily. Fast and easy starts, even in the hardest tile.
Bosch HDG34 3/4″ 20mm Diamond Grit Hole Saw
- Intergral quick change adaptor- change holesaw sizes and types in seconds and remove material plugs easily. Segmented teeth, reduces debris and heat build-up. Vacuum brazed diamond grit, faster cutting and longer life. Fast and easy starts, even in the hardest tile.
LENOX 29966-66CG 4-1/8″ Carbide Grit Hole Saw
- It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates. Carbide grit edge will not snag or chip when cutting thin materials. Carbide grit hole saw. Measures 4-1/8 inches diameter. Features a hard tungsten carbide grit cutting edge.
Lenox Tools 1211212DGDS Diamond Grit Hole Saw D/S-12DG, 3/4-Inch or 14.3mm
- Easy to use. The product is 3/4″ diamond hole saw. Fast and easy cutting. Easy plug removal. The product is manufactured in china. Provides more holes in less time. Ideal for cement board, abrasives, tile and stone. Diamond edge for longer life and speed.
Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw
- Clean effective cuts and extended life. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm.
Starrett KD0200-N 2-Inch Diamond Grit Holesaw
- Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Recommended cutting speed is from 150 to 300-rpm.
Starrett KD0400-N 4-Inch Diamond Grit Holesaw
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Recommended cutting speed is from 150 to 300-rpm.
Starrett KD0258-N 2.5/8-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Clean effective cuts and extended life. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Recommended cutting speed is from 150 to 300-rpm. Uniform synthetic diamond grit bonded over a durable steel platform.
Lenox Tools 1212040DGHS 40 Diamond Grit Hole Saw, 2-1/2-Inch or 63.5mm
- Provides more holes in less time. The product is manufactured in china. The product is lenox 25″diameter hole saw. Diamond edge for longer life and speed. Ideal for cement board, abrasives, tile and stone. Easy to use. Fast and easy cutting. Easy plug removal.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
