Top 22 Drive Impacts for 2020

 

Makita XWT07T 5.0 Amp 18V LXT Lithium-Ion Brushless Cordless High Torque 3/4″ Sq. Drive Impact Wrench Kit w/ Friction Ring Anvil - 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 rpm & 0-1,800/ 0-2,000/ 0-2,200 ipm) provides precise fastening control for a wide range of applications. 3/4″ anvil with friction ring and thru hole retention system for maximum productivity rubberized soft grip handle provides increased comfort on the job. Bl motor delivers 780 ftlbs of fastening torque and 1,250 ftlbs of breakaway torque. The bl brushless motor eliminates carbon brushes, enabling the bl motor to run cooler and more efficiently for longer life. Efficient bl brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.

 

CASOMAN 1/2-Inch Drive Deep Impact Socket Set, Metric, Cr-V, 6-Point, 10 mm – 24 mm, 14-Sockets Set - 14 pieces deep metric sockets come in a heavy duty custom case easy storage 10-11-12-13-14-15-16-17-18-19-21-22-23-24mm. Permanent high visibility laser etched size marking on each socket for quick size selection when working. Made from drop forged and heat treated chrome vanadium steel with a corrosion-resistant black electroplate finish. Extra-deep broach accommodates longer fasteners. 6-point flank drive design grips fastener more tightly on the flat sides and prevents rounding off at corners.

 

TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece - Drives included screwdriver bits or any 3/8 in drive impact socket. Forward and reverse drive direction. Comfortable handle with non-slip knurled grip. Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements. Instant impact force loosens rusted or frozen screws without damaging them.

 

TEKTON 47825 1/2-Inch Drive by 3-Inch Impact Extension Bar, Cr-V - Spring-loaded detent ball securely latches onto sockets, preventing them from being dropped. Adds length to access hard-to-reach fasteners. Made of premium chrome vanadium steel with a protective black oxide finish. Engineered for use with impact drivers. Through-hole in drive end locks onto drive tang.

 

Sunex 4304, 3/4 Inch Drive, Universal Impact Joint, Cr-Mo Steel, Radius Corner Design, Flexible, Meets ANSI Standards - Lifetime warranty with sunexpress get in the express lane with the industry’s leading warranty program and exchange warranted products directly with sunex. Flexible allows for greater access around obstructions. Cr-mo steel provides the strength and flexibility to handle high torque impact tools. Radius corner design reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners. Universal joint adapts any socket for use in swivel applications. Ball detent holds socket in place. Meets ansi standards all adapters are rigorously tested, ensuring peak performance and durability.

 

TEKTON 3/4-Inch Drive Deep Impact Socket Set, Inch, Cr-Mo, 7/8-Inch – 2-Inch, 22-Piece | 48995 - High-performance chrome molybdenum steel sockets can be used with impact wrenches. High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off. 18 inch, 24-tooth, oval-head ratchet with quick-release drive tang locks onto sockets. Meets or exceeds ansi performance standards. 18 inch sliding t head breaker bar loosens frozen fasteners.

 

Stanley Proto J10670A 1″ Drive Impact Universal Joint - Tight tolerances for snug fit on fastener. Position at appropriate angle to turn fasteners where obstructions prevent a straight application, made in usa. Used wherever powered drive tools are used to install or remove fasteners. Designed to withstand the high torque and force associated with impact tools in repetitive application. Features two through holes and a groove to accept a proto retaining ring or pin and o-ring to help secure the socket to the drive tool anvil.

 

GEARWRENCH 1/4″ Drive Impact Universal Joint – 80101 - High-performance chrome vanadium steel sockets can be used with impact wrenches. Meets or exceeds ansi performance standards. 18 inch sliding t head breaker bar loosens frozen fasteners. 18 inch, 24-tooth, oval-head ratchet with quick-release drive tang locks onto sockets. For 1/4″ impact drive tools.

 

TEKTON 47755 1/2-Inch Drive by 3/4-Inch Shallow Impact Socket, Cr-V, 6-Point - Engineered for use with impact drivers. High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off. Made of premium chrome vanadium steel with a protective black phosphate finish. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. Shallow well allows socket to fit into tighter spaces.

 

Makita XWT06Z 18V LXT Lithium-Ion Cordless Square Drive Impact Wrench, 3/8-Inch - Rubberized soft grip handle provides increased comfort on the job. Variable speed (0-2, 100 rpm & 0-3, 200 ipm) for a wide range of fastening applications. Weighs only 34 lbs with battery (battery not included) for reduced operator fatigue. Makita-built 4-pole motor delivers 155 ftlbs of max torque. Compact and ergonomic design at only 6-1/8″ long.

 

CASOMAN 3/8″ Drive Impact Socket Set, 48 Piece Standard SAE and Metric Sizes (5/16-Inch to 3/4-Inch and 8-22 mm), 6 Point, Cr-V Steel Socket Set - Meets or exceeds ansi performance standards it comes with 1 year quality warranty. Made from drop forged and heat treated chrome vanadium steel (50bv30) with a corrosion-resistant black phosphate finish, providing the durability for a hard use. Deep 6-point sockets with chamfered openings and an attachment port compatible with traditional ratchets, high-contrast laser etched with high-visibility markings and hard stamped with size labels. Set includes 3″ and 6″ drive impact extension bar, 3/8″ universal joint, 1/2″ to 3/8″ reducer and the following socket sizes sae, deep 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 (inches), shallow 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 (inches) ,metric sizes deep 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,21,22mm, shallow 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,21,22mm. Heavy duty plastic blow-molded carrying case for easy transport, simple storage, and quick organization.

 

DEWALT DWMT70775 3/8-Inch Square Drive Impact Wrench - The dewalt dwmt70775 3/8″ square drive impact wrench features a maximum torque at 300 ft-lbs whichs helps to break free fasteners that are stubborn or stuck. The 11,000 rpm helps provide high power fastening, with a twin hammer mechanism. This impact wrench also offers an adjustable power regulator. It operates at 1200 bpm (blows/minute) and has a 1/4-inch air inlet. It has shock resistant housing bumpers to help protect the housing, a composite body design, and ergonomic handle with rubber cushion grip, along with a bottom handle exhaust.

 

TEKTON 4966 3/8-Inch Drive Impact Extension Bar Set, Cr-V, 3-Piece - Made of premium chrome vanadium steel with a protective black oxide finish. Adds length to access hard-to-reach fasteners. Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Engineered for use with impact drivers. Through-hole in drive ends locks onto drive tang.

 

Neiko 02430A Drive Universal Joint Impact Socket, Cr-Mo Steel, 1/2″ - Made to pair perfectly with your impact tools. Constructed of high strength chrome moly steel for extra durability. Corner design allows you to grip flat on fasteners to prevent rounding off corners. Flexible 360 degree rotating end allows better reach for obstructed and narrow areas. Steel ball retainer on male end for a secure, tight fit.

 

Bosch IWBH182B Bare-Tool 18V EC Brushless 1/2″ Square Drive Impact Wrench - Advanced electronics, electronic motor and cell protection help prevent overheating and overloading for extended tool life and runtime. Highest torque in its class, highest torque output in its class at 1650 in/lbs. Superior ergonomics- smallest grip diameter for best in class ergonomics. Brushless motor- up to 2 times motor life, superior efficiency for longer runtime and no maintenance. Cool pack technology, advanced heat conductive housing keeps battery cooler and extends life.

 

Neiko 02447A 1/2-Inch Drive Shallow Impact Socket Set with Extension Bars, 32-Piece | SAE (3/8″ to 1-1/14″) Metric (10-32 MM) - The complete set comes with the following pieces 29 x 1/2″ drive sockets, sae 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4″, metric 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22, 24, 27, 30, 32mm 2 x 1/2″ extension bars 3, 5-inch, 1 x 3/8″ (f) to 1/2″ (m) adapter. Highly visible laser-etched markings on corrosion-resistant black phosphate finish makes it easy to identify drive socket sizes, specs, and measurements. Sturdy and strong blow molded case features socket size labels for organized storage and is secured by two lever locks. Impact pieces are constructed of heavy-duty drop-forged premium chrome vanadium steel to withstand extreme levels of torque changes against fasteners. 6-point hex socket design prevents round-off deterioration under high torque and hammering stress with use of impact and electric wrenches.

 

1″ Drive Impact Extension Bar Set 4″ / 6″ and 10″ For HGV Agricultural Use 3pc Set - Professional extensions for commercial or occasional use 1″ drive impact extension bar set fits any 1″ drive impact gun / ratchet / power / breaker bar etc impacted so ideal for use on hgv vehicles manufactured from chrome vanadium steel (impacted for industrial use) for strength and durabilityset includes the following sizes 1 x 1″ drive extension bar total length 100mm / 4″ 1 x 1″ drive extension bar total length 150mm / 6″ 1 x 1″ drive extension bar total length 250mm / 10″ comes in a plastic tray for easy storage and transportation.

 

DEWALT 3/4″ Drive Impact Socket 6 PT 15/16 – DWMT75163B - O-ring and retaining pin compatible for added job-site safety. Directtorque technology helps prevent rounding of fasteners. Oil rubbed black oxide coating for corrosion resistance. Heat treated cr-440 steel for strength and durability. Laser etched markings for easier identification on black phosphate finishes.

 

Drive Impact Socket Set, Tacklife 18pcs 1/2-inch Drive Deep Impact Socket Set, 6 Point, 10-24mm, 15pcs Metric Sockets with 3pcs 1/2-Inch Drive Impact Extension Bar Set – HIS1A - ▲【Laser etched size 】 long-lasting laser etched size markings in each socket make it possible for quick and easy size selection even in the dim light. ▲【tacklife’s services】tacklife promises that customers can enjoy friendly customer service(just e-mail us through amazon). ▲【100% quality assurance】forged with heat treated chrome vanadium steel and each socket with corrosion-resistant black phosphate finish for anti-oil, anti-rust. ▲【Customized storage case】designated slots in the case keep every piece in place and sockets don’t fall off and slip sizes are also stamped beside each slot for identification. ▲【6-point design】6-point socket design enlarges contact surface between sockets and fasteners, locks force more firmly, reduces wear and prevents rounding off at corners.

 

Makita XWT041X 3.0Ah 18V LXT Lithium-Ion Cordless 1/2″ Square Drive Impact Wrench Kit - Shock absorbent handle protects battery housing for extra durability. Compact and ergonomic design at only 10-1/2″ long. Rocker switch for forward/reverse operation. Makita-built motor delivers 325 ftlbs of max torque, with 1,600 rpm and 2,200 ipm for superior fastening power. Rubberized soft grip handle provides increased comfort on the job.

 

AIRCAT 1778-VXL 3/4″ Drive Impact - Patented trigger mounted combines forward/ reverse power management switch provides convenient one hand operation. New 2018 patented muffler reduces noise level to 84 d(b)a. Patented vibrotherm drive pin-less/twin hammer clutch reduces wear and vibration. Patented grip provides unmatched operator comfort. 3 year.

 

Drive Impact Socket Set, Tacklife 17pcs 1/2-inch Drive Deep Impact Socket Set, 6 Point, 3/8-1-1/4 inch, 14pcs Inch Sockets with 3pcs 1/2-Inch Drive Impact Extension Bar Set – HIS2A - ▲【Solid storage case】the set comes with a customized heavy duty case for portability designated slots in the case keep every piece in place sizes are also stamped beside each slot for easy identification and organized storage. ▲【tacklife’s services】tacklife promises that customers can enjoy our friendly customer service(just e-mail us through amazon). ▲【Advanced & durable 】 made from heat treated chrome vanadium steel with black phosphate finish for anti-oil, anti-rust 6-point socket design increases contact surface between sockets and bolts for less abrasion on the bolt surface. ▲【Laser etched size】high-contrast, long-lasting laser etched size markings are easy to identify even in dim light. ▲【Professional & assured】each socket was precisely cnc machined, which meet or exceed ansi performance standards and and tested by ultrasonic detection technology to reduce defective rate.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.