ZFE 25mm Mounted Cotton Polishing Buff Wheel 1/8″(3mm) Shank For Dremel Rotay Tools Pack of 20pcs
- The diameter of the shank is 1/8″(3mm). Set of mounted cotton buffs, polishing tool, fit rotay tools grinder. These are great for polishing jewelry or other metal working usesthey can be used with a dremel tool,fit for rotay tools grinder. The polishing wheels are belong to the consumables. Mounted cotton buffs polishing wheel for dremel rotay tools.
Easy Light 7 Pcs Diamond 5 Inch Wet Polishing Pads Abrasive Tools for Granite Marble Stone Grit 50-3000
- 5 inch diamond wet polishing pads 7 pieces (grit 50#, 150#, 300#, 500#, 1000#, 2000#, 3000#). 3 mm thickness and flexible velcro backed velcro colour blue(50#), yellow(150#), orange(300#), red(500#), green(1000#), light blue(2000#), black(3000#). The material contain diamond powder and suitable for granite, marble stone. Maximum speed rpm 4000, optimal rpm 2200. This type of pads are general grade it’s not the premium grade.
Bullet Face 14Pcs Mandrel Mounted White Conical Felt and Rubber Point Polishing Tool
- Assorted 14 pieces of felt and rubber polishing bobs felt bob, suitable for polishing and buffing jewelry, soft metal, wood, plastic, etc. Also can be used with electric drills, electric grinders or other rotary tools rubber bob, suitable for all your polishing needs, it is special use on metal(gun ), iron, stainless steel and so on.
Toolocity 3TRIOSET 3-Inch Triangle Diamond Polishing Pads for Oscillating Multi Tools, Set of 7
- 3″ triangle diamond polishing pads set of 7 for oscillating multi tools. The set of triangle diamond polishing pad consists of 60 grit (blue), 120 grit (yellow), 220 grit (orange), and 400 grit (red) electroplated diamond polishing pads and 800 grit (gree.
SPTA 3Pcs Professional Sponge Cone Metal Polishing Tool Set/Polishing pad
- High performance foam pad system. Bring out the highest level showcar of shine with the ultra-smooth finishing polish pads. Size120mmx90mm. Cut and buff the most difficult oxidized automotive coatings, hardest clear coats. Polish the full spectrum of coatings.
12PCS Mandrel Mounted Conical Felt Bob Polishing Tool with Shank
- Suitable for polishing and buffing , soft metal, wood, plastic, etc. Mandrel mounted white conical felt bob polishing tool. Can be used with electric drills, electric grinders or other rotary tools. Mandrel mounted white conical felt bob.
PHYHOO 1/8″ Medium Grit Finishing Abrasive Buffs Mounted Buffing Wheels Polishing Tool Dremel Rotary Accessories
- The diameter of shank is 1/8″(please forgive a little errors on the measurements). The polishing wheels are belong to the consumables. Ideal for cleaning and light sanding and tarnish removal. Pack of 20 pieces of dremel polishing accessories. Great for shaping wood, smoothing fiberglass, sanding inside curves, other difficult places, and many more.
Mothers 05140 PowerBall Metal Polishing Tool
- Attaches to a drill to create a powerful polisher. Shines a wide range of automotive surfaces billet, chrome, plastic, stainless steel, aluminum and more. The product is manufactured in china. The product is powerball polisher tool. Open cell foam is flexible enough to reach into tight areas, but soft enough to polish delicate surfaces. Easy to use. Saves time and energy, prevents hours of tedious polishing. Regular use provides a long lasting benefit to your vehicle.
Forsun Mounted Cotton Polishing Buff Wheel 2.35mm Shank for Dremel Rotay Tools Pack of 20pcs
- Colorwhite. Set of 20 pcs of mounted cotton buffs, polishing tool, fit rotay tools grinder. Size235mm.
Airgoesin Rotary Tungsten Carbide Bur Cutting Drill Polisher for Ceramic Acrylic or Metal, Polishing Tool Accessories, Shank 3/32″ (2.35 mm) Diameter, Fits Dremel, 10pcs/pk
- Safe, reliable and convenient to use burs diameter 2. Processing is high quality and smoothness and can be all sorts of high-precision shape. 35mm packing list 10 burs in a box as our pictures show. Description 100% brand new and high quality for universal grind, remove, polishing acrylic, alloy, metal, jewellery, stones, etc. It widely applied to jewellery polishing, dental laborary, diy or hobbies.
Uxcell Metal Blade Wooden Plane Polishing Tool, 1-1/7″
- Material wood, metal blade width 2 9cm/ 1 14″. Package content 1 x plane. Color as picture shown weight 135g. Total size (approx) 122 x 39 x 45cm / 48″ x 15″ x 18″ (l w t ). Product name plane.
uxcell Grinding Polishing Tool Abrasive Sanding Sandpaper 100 Grit 10pcs
- For general cleaning and finishing of metals using portable grinders. Good quality, tear resistant, waterproof abrasive paper for working on paint, varnish, etc, solid surface materials sanding. Easy to clean and easy to use, durable and light weight. Suitable for aluminum alloy, zinc alloy, zinc, copper alloy, and other soft metals. Use for surface preparation prior to coating.
ZFE New 1Pc Professional T60 Sponge Cone Metal Polishing Tool /Polishing Pad
- With 6 mm diameter mandrel. New 120x90mm t60 polishing cones specialy designed for wheel hub and corner polishing work with electric drill and liquid polish for high-gloss restoration.
Medium & Soft Llama Hair Wheel Brushes Fits Dremel Polishing Tool Kit 12 Pcs
- This 12 piece kit includes medium & soft llama hair wheel brushes fits dremel polishing tool 6 new soft llama hair wheel brushes this a new set of 6 soft llama hair wheel brushes these are ideal for polishing and cleaning all kinds of metals they can be used with a dremel tool each measures approximately 1″ (25 mm) in diameter 6 new medium llama hair wheel brushes this a new set of 6 medium llama hair wheel brushes these are ideal for polishing and cleaning all kinds of metals they can be used with a dremel tool each measures approximately 1″ (25 mm) in diameter.
Damo Diamond Tools 4FPP127SETB4SRBH 4-Inch Wet Diamond Polishing Pads Granite Polish/Concrete Polisher
- Connect a back holder to the polisher, and attach a wet pad of grit 50 to the back holder. Wet the surface with a small amount of water. Set the speed at 3,000-4,000rpm and start polishing process. Repeat as necessary to improve the luster and achieve the mirror effect result. Repeat the same process until grit 800. (2)moving two passes across and one pass up and down is a good technique. Polishing with grit 1500 until the area you are working on becomes dry. (3)turn off the water supply on grit 1500 and 3000. Turn on the water supply. We damo diamond tools, llc holds exclusive distribution to damo trademark products as you can see clearly marked from the picture on the product listing. When the water is consumed, the process is complete. Do not skip. . (1)wear rubber boots, an apron and safety glasses first. Make sure all prior scratches are removed before moving onto the next grit. Wet the material once again with a small amount of water, continue polishing with grit 3000 until you achieve the high gloss and luster on the material. (5)if you want to achieve the best polishing results on granite or other natural stones, use buff pad as the last step. Wet the workpiece and run the buff pad semi-wet with very low water. (4)polish from grit 50 to grit 3000 respectively.
uxcell 12 Pcs 3mm Shank 3mm Diameter Conical Wool Felt Bobs Polishing Tool
- Weight 24g. Package content 12 x felt bob. Product name mounted felt bobfelt size 3 x 14mm / 01″ x 06″ (dl). Material felt, metalcolor white, silver tone. Shank diameter 3mm / 01″total length 43mm / 17″.
50pc 3mm 1/8” Shank Hardened Wool Felt Mandrel Mounted Polishing Buffing Accessories Set for Dremel Rotary Tools
- Usage for materials as steel, aluminum, brass, copper, wood polishing, burnishing, finishing. Size 3mm(1/8”) shank reminder this felt set is harder than normal ones, use with polishing paste. Shape egg ball, cylinder, bulb, bull-nose, wheel, circular cone, umbrella, for various usages. Durable, ideal for polishing and buffing on plastics, jade stone, jewelry and other small parts. Wool fibers are highly compressed to produce versatile cleaning, polishing & buffing for materials.
SPTA 1″(25mm) Mounted Cotton Buffs, Polishing Tool Set For 3/32″(2.35mm) Proxxon Dremel Rotary Tools Pack of 80Pcs
- Used widely in aerospace, plant maintenance, foundry, automotive, metal fabrication and shipyards. Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass. Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel. Used with most rotary tools including dremel, craftsman, chicago and more. Great for all types of detail work in both hard and delicate materials.
Easy Light Premium Grade 4 Inch Diamond Dry Polishing Pads Tools for Sanding Marble Granite Stone Pack of 7 Grit 50-3000
- Also available in grit 50#, 100#, 200#, 400#, 800#, 1500#, 3000#, buff. High diamond content, cut fast and aggressively the material apply to granite, marble stone (standard aa). 4 inch diamond dry polishing pads 7 pieces (include grit 50#, 100#, 200#, 400#, 800#, 1500#, 3000#). Good for on-site job without water (it’s both suitable for wet or dry polishing we recommend dry polish stone). Velcro backed and extra flexible to polish contoured or straight surface.
APHRODITE Hygiene Prophy Jet Air Polisher Tooth Polishing Tool 2 Hole/4Hole (4 Hole)
- 05mpa, 0. Waterflow 30ml/min max. 5mpa max. 2mpa-0. Powderflow 2g-3g/min we will send the colour randomly. Packing list 1 x air polisher 1 x spare covers 1 x nozzle 1 x nozzle cleaner 1 x gasket 1 x instruction manual. 5mpa air pressure 0. Technical autoclavable temperature 135ºc connection 4-hole/2-hole water pressure 0.
Ex-Cell ETX3 Pnuematic 3-in-1 Rotary/Cutting/Polishing Tool Kit with 1/8-Inch and 1/4-Inch Collets and Assessories
- All with 1/8″ (3mm) mandrel. Kit includes 4 flat cylinder felt burrs, 3 cylinder pummel felt burrs, (1) 10mm echelon felt burr, (1) 10mm reversed echelon felt burr, 2 triangle felt burrs and (1) 10mm kettledrum felt burr. Ideal for smoothing interior surfaces, there are twelve interchangeable pieces for the rotary grinding and polishing tool. Rotary tool accessories, felt-tipped, 12 pieces. Smooth and refine surfaces by using these felt buffs to polish metal, ceramics and glass.
GBSTORE 12 Pcs Mandrel Mounted White Conical Felt Point Polishing Tool
- Felt size 9 x 14mm / 035″ x 055″ (dl) shank diameter 3mmtotal length 47mm / 185″ material felt, metal. 100% brand new and high quality. Perfectly using these buffs for polishing metal, ceramics and glass. Package content 12 x felt bob. Product name mounted felt bob.
Polishing Rotary Tool Mandrel Mounted Wool Grinder for Dremel by Carving Expert
- Perfectly using these buffs for polishing metal, ceramics and glass. The whole felts are 1/8”(3mm) shank. Kit includes flat cylinder felt burrs, cylinder pummel felt burrs. Ideal for the rotary grinding and polishing tool. 13 pieces, rotary tool accessories, felt-tipped.
6 Pieces 4mm(0.16 inch) Diamond Ball Mounted Points Carbide Rotary Cut Rotary Burr With 0.12 inch Shank Fit Dremel Jewelery Metal Mold Polishing Tool Set
- Perfect for jewelers, craft hobbyists, modelers, and other professions. Ideal for glass, metal, stone, tile, ceramics and more. Great for carving, etching, grinding, sanding, etc. Note it should be cooling with water when use it, keep motionless to install it, and cannot too forcibly to use it. Coated with tough diamond particle at head.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
