Top 25 Best 4 Inch Diameters

 

Prime-Line Products GD 52108 4-Inch Diameter Pulley with Strap and Bolt

Prime-Line Products GD 52108 4-Inch Diameter Pulley with Strap and Bolt

Prime-Line Products GD 52108 4-Inch Diameter Pulley with Strap and Bolt - This heavy duty pulley is constructed from galvanized steel. . It features a case hardened steel race with steel ball bearings. This style pulley can be used at stationary or spring pulley positions.

 

Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe ClampPack Of 5 Sets

Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 5 Sets)

Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 5 Sets) - Drilled ends (not included) for additional support from a wall or ceiling. Bolt these around any duct and attach a piece of metal conduit with flattened and.

 

Woodstock W1007 4-Inch Blast Gate for Use with VacuumDust Collectors 4-inch Diameter 2 Pack

Woodstock W1007 4-Inch Blast Gate for Use with Vacuum/Dust Collectors (4-inch Diameter 2 Pack)

Woodstock W1007 4-Inch Blast Gate for Use with Vacuum/Dust Collectors (4-inch Diameter 2 Pack) - We offer blast gates in both black abs plastic and aluminum. Plastic blast gates are economically priced, have a textured surface and an easy sliding gate action. Used in every dust collection system to control air flow from one machine to another, blast gates maximize system efficiency. Our blast gates are fast movers. For those customers who prefer metal, our top quality aluminum blast gates feature a cast aluminum body with steel gate and locking knob.

 

CMT 69201314 Molding Profile Set 4-Inch Diameter 1-14-Inch Bore

CMT 692.013.14 Molding & Profile Set, 4-Inch Diameter, 1-1/4-Inch Bore

CMT 692.013.14 Molding & Profile Set, 4-Inch Diameter, 1-1/4-Inch Bore - 022, 690. 005, 690. 002, 690. 021, 690. 003, 690. 011, 690. 004, 690. 006, 690. Our molding and profile shaper set includes 13 profiles that provide a great basic selection for almost any decorative molding need. 008, 690. Cmt’s profiled knives included 690. 042. 001, 690. 031, 690. 000, 690.

 

Speedi-Products FDSC-04 4-Inch Diameter Flex and Sheet Metal Duct Splice Connector Collar

Speedi-Products FDSC-04 4-Inch Diameter Flex and Sheet Metal Duct Splice Connector Collar

Speedi-Products FDSC-04 4-Inch Diameter Flex and Sheet Metal Duct Splice Connector Collar - Insulate ductwork for improved energy efficiency and comfort. 4-inch flex duct splice collar. Seal joints with approved duct mastic sealants. Consult your local building codes for approved installation practices. For splicing two lengths of flexible or sheet metal round ducts together.

 

CMT 24000804 Biscuit Joiner Blade 4-Inch Diameter x 8 Teeth PTFE-Coated

CMT 240.008.04 Biscuit Joiner Blade, 4-Inch Diameter x 8 Teeth, PTFE-Coated.

CMT 240.008.04 Biscuit Joiner Blade, 4-Inch Diameter x 8 Teeth, PTFE-Coated. - High-grade german steel and 6 micrograin carbide-tipped teeth guarantee years of use. . The 4 cmt biscuit joiner blades with orange-ptfe industrial coating trademark makes biscuit joining quickly and easily. This blade fits lamello, dewalt, skil, bosch, freud and other popular biscuit joiner models.

 

Fisch FSA-280187 34-Inch Diameter by 14-Inch Hex Wave Cutter Forstner Bit

Fisch FSA-280187 3/4-Inch Diameter by 1/4-Inch Hex Wave Cutter Forstner Bit

Fisch FSA-280187 3/4-Inch Diameter by 1/4-Inch Hex Wave Cutter Forstner Bit - High rotation speed. Can be resharpened up to 30 times before needing to be replaced. Optimized cutting resulting in an improved running of your drill. Suitable for hard and softwood, coated chip board, laminates as well as mdf plates. Precise cutting quality.

 

Speedi-Products EX-HJBW 04 4-Inch Diameter Hood J-Block White

Speedi-Products EX-HJBW 04 4-Inch Diameter Hood J-Block. White

Speedi-Products EX-HJBW 04 4-Inch Diameter Hood J-Block. White - Speedi-exhaust products are made in the usa. Weighted damper prevents wind noise and animal entry. The j-block design has a reversible trim ring to accomodate brick, siding and stucco applications. Seal joints with approved duct mastic sealants and tapes. Consult your local building codes for approved installation practices.

 

Fisch FSA-190981 14-Inch Diameter by 14-Inch  Wave Cutter Forstner Bit

Fisch FSA-190981 1/4-Inch Diameter by 1/4-Inch Wave Cutter Forstner Bit

Fisch FSA-190981 1/4-Inch Diameter by 1/4-Inch Wave Cutter Forstner Bit - High rotation speed. Suitable for hard and softwood, coated chip board, laminates as well as mdf plates. Optimized cutting resulting in an improved running of your drill. Precise cutting quality. Can be resharpened up to 30 times before needing to be replaced.

 

CMT 69201310 Cabinet Joinery Set 4-Inch Diameter 1-Inch Bore

CMT 692.013.10 Cabinet & Joinery Set, 4-Inch Diameter, 1-Inch Bore

CMT 692.013.10 Cabinet & Joinery Set, 4-Inch Diameter, 1-Inch Bore - Lightweight, aircraft-grade aluminum cutterhead. 13 pairs of m2 steel knives featuring 1-37/64-inch cutting length. Delivered in a molded plastic case ideal for the professional woodworker. Included are profiles for raised panels, rail & stile, tongue & groove and cove & bead. Rpm between 5500 and 8400.

 

Noritz RC4 4-Inch Diameter Rain Cap Stainless Steel Single Wall Venting

Noritz RC4 4-Inch Diameter Rain Cap Stainless Steel Single Wall Venting

Noritz RC4 4-Inch Diameter Rain Cap Stainless Steel Single Wall Venting - With a solid commitment to sustainability and superb technology solutions in tankless hot water heaters, noritz makes significant investment in research and development. Noritz america corporation was established in 2001 to meet a growing demand among american consumers for more cost effective hot water heater technology. Serving both homeowners and commercial users across the united states and canada, noritz america offers four distinguished lines of tankless gas water heaters to meet the varying needs of its broad spectrum of customers – ecotough, protough and value solutions as well as full line of commercial. And through the dedication of its valued employees, noritz corporation continues to shape the future of sustainable living in north america through its tankless water heater solutions.

 

Speedi-Products EX-EVB 04 4-Inch Diameter Plastic Eave Vent Brown

Speedi-Products EX-EVB 04 4-Inch Diameter Plastic Eave Vent, Brown

Speedi-Products EX-EVB 04 4-Inch Diameter Plastic Eave Vent, Brown - Used for exhaust or fresh air intake venting systems. Use for dryer venting. Long aluminum tail for duct connection. Seal joints with approved duct mastic sealants & tapes. Speedi-exhaust products are made in the usa.

 

Hyde Tools 46565 4-Inch Diameter 23-12-Inch Mudslinger Mixer

Hyde Tools 46565 4-Inch Diameter 23-1/2-Inch Mudslinger Mixer

Hyde Tools 46565 4-Inch Diameter 23-1/2-Inch Mudslinger Mixer - For use in 5-gallon containers. Mix drywall compound, driveway sealer, paint, etc. Electrostatic paint coating resists corrosion and allows easy clean up. Use with electric drill. Welded steel construction.

 

Speedi-Products 4-Inch Diameter Plastic White Round Soffit VentSM-RSV 4

Speedi-Products 4-Inch Diameter Plastic White Round Soffit Vent(SM-RSV 4)

Speedi-Products 4-Inch Diameter Plastic White Round Soffit Vent(SM-RSV 4) - Can be used for remodeling, do it yourself and new residential projects. Speedi-products 4-inch white round soffit vent. Used in soffits for exhaust duct terminations and soffit venting. Uv stabalized with extra long collar and molded in mesh screen.

 

Dryer Wall Vent Galvanized Steel Standard 4 Inch Diameter Exhaust - Vent Works

Dryer Wall Vent Galvanized Steel (Standard 4 Inch Diameter Exhaust) – Vent Works

Dryer Wall Vent Galvanized Steel (Standard 4 Inch Diameter Exhaust) – Vent Works - There are 3 different material options galvanized (26 gauge), white powder coated steel (26 gauge) and aluminum (high grade). Our vents are used in a wide variety of commercial and residential applications. These heavy gauge vents are not available at your local home improvement or general hardware stores. Not for use as fresh air intake. To install cut a 4-1/8″ inch hole in the side wall and install, be sure to seal it. When venting through a wall is the best option a quality wall vent should be considered the dryer wall vent by vent works was designed with a spring loaded backdraft damper to prevent drafting from outdoors. This vent is constructed of 26 gauge galvanized steel, if you need a different material or finish we have other dryer wall vents available.

 

Speedi-Boot SBH-484 SB 4-Inch Width by 8-Inch Length to 4-Inch Diameter Straight Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-484 SB 4-Inch Width by 8-Inch Length to 4-Inch Diameter Straight Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-484 SB 4-Inch Width by 8-Inch Length to 4-Inch Diameter Straight Register Vent Boot with Adjustable Hangers - Mud ring prevents gaps between the boot and sheetrock. Dust and debris cover prevents construction contamination. Dust and debris cover provides a plug for hvac pressure testing. Adjustable telescoping hanger arms that can be shortened as well. Foam gasket seals air tight at installation to back of sheetrock.

 

Speedi-Products AC-VDQ 04 4-Inch Diameter Galvanized Duct Volume Damper wQuad

Speedi-Products AC-VDQ 04 4-Inch Diameter Galvanized Duct Volume Damper w/Quad

Speedi-Products AC-VDQ 04 4-Inch Diameter Galvanized Duct Volume Damper w/Quad - Ideal for use in branch duct lines for adjusting supply or return air volume. Consult your local building codes for approved installation practices. 4-inch galvanized sheet metal round volume damper with manual quadrant adjustment handle. Field installed into sheet metal starting collars or register boots.

 

Dynabrade 93168 4-Inch Diameter 150 Grit AO Spindle-Mount Sanding Star Maroon

Dynabrade 93168 4-Inch Diameter 150 Grit A/O Spindle-Mount Sanding Star, Maroon

Dynabrade 93168 4-Inch Diameter 150 Grit A/O Spindle-Mount Sanding Star, Maroon - Featuresthe most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applidenibbing and sanding white wood raised panels. 1/4″type coatedgrit 150mineral aluminum oxide. Specificationsdia. 4″shaft dia.

 

Speedi-Products EX-26AP 460 4-Inch Diameter by 60-Inch Length 26-Gauge Aluminum Rigid Pipe

Speedi-Products EX-26AP 460 4-Inch Diameter by 60-Inch Length 26-Gauge Aluminum Rigid Pipe

Speedi-Products EX-26AP 460 4-Inch Diameter by 60-Inch Length 26-Gauge Aluminum Rigid Pipe - Insulate ductwork for improved energy efficiency and comfort. Used in hvac warm air supply, return and exhaust duct systems. Consult your local building codes for approved installation practices. Seal joints with approved duct mastic sealants.

 

Speedi-Products EX-EVW 04 4-Inch Diameter Plastic Eave Vent White

Speedi-Products EX-EVW 04 4-Inch Diameter Plastic Eave Vent, White

Speedi-Products EX-EVW 04 4-Inch Diameter Plastic Eave Vent, White - Use for dryer venting. Used for exhaust or fresh air intake venting systems. Long aluminum tail for duct connection. Speedi-exhaust products are made in the usa. Seal joints with approved duct mastic sealants & tapes.

 

Speedi-Products EX-EVML 04 4-Inch Diameter Micro Louver Eave Vent White

Speedi-Products EX-EVML 04 4-Inch Diameter Micro Louver Eave Vent, White

Speedi-Products EX-EVML 04 4-Inch Diameter Micro Louver Eave Vent, White - Long aluminum tail for duct connection. Seal joints with approved duct mastic sealants & tapes. Speedi-exhaust products are made in the usa. Speedi-products 4-inch white micro louver eave vent. Used for exhaust or fresh air intake venting systems.

 

Speedi-Boot SBH-484 NB 4-Inch Width by 8-Inch Length to 4-Inch Diameter 90-Degree Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-484 NB 4-Inch Width by 8-Inch Length to 4-Inch Diameter 90-Degree Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-484 NB 4-Inch Width by 8-Inch Length to 4-Inch Diameter 90-Degree Register Vent Boot with Adjustable Hangers - Mud ring prevents gaps between the boot and sheetrock. Dust and debris cover provides a plug for hvac pressure testing. Dust and debris cover prevents construction contamination. Foam gasket seals air tight at installation to back of sheetrock. Adjustable telescoping hanger arms that can be shortened as well.

 

Speedi-Products AC-VDQ 04 4-Inch Diameter Galvanized Duct Volume Damper wQuad Model AC-VDQ 04 Tools Hardware store

Speedi-Products AC-VDQ 04 4-Inch Diameter Galvanized Duct Volume Damper w/Quad, Model: AC-VDQ 04, Tools & Hardware store

Speedi-Products AC-VDQ 04 4-Inch Diameter Galvanized Duct Volume Damper w/Quad, Model: AC-VDQ 04, Tools & Hardware store - Ideal for use in branch duct lines for adjusting supply or return air volume. 4-inch galvanized sheet metal round volume damper with manual quadrant adjustment handle. Field installed into sheet metal starting collars or register boots. Consult your local building codes for approved installation practices.

 

Speedi-Products EX-HLWT 04 4-Inch Diameter Louvered Plastic Hood White with 11-Inch Long Tailpipe

Speedi-Products EX-HLWT 04 4-Inch Diameter Louvered Plastic Hood, White with 11-Inch Long Tailpipe

Speedi-Products EX-HLWT 04 4-Inch Diameter Louvered Plastic Hood, White with 11-Inch Long Tailpipe - Seal joints with approved duct mastic sealants & tapes. Low profile easy to install. Suitable for dryer or bathroom fan venting. Speedi-exhaust products are made in the usa. Consult your local building codes for approved installation practices.

 

MK Morse Hole Saw AT64  4-Inch Diameter Carbide Tipped

MK Morse Hole Saw AT64 4-Inch Diameter Carbide Tipped

MK Morse Hole Saw AT64 4-Inch Diameter Carbide Tipped - Tungsten carbide tooth tips offer the highest wear resistance possible and longer life cutting abrasive materials. Maximum cutting depth 1-1/2-inch. 1 hole saw per box. 3 teeth per inch creates wider gullet for better chip clearance and faster cutting. Ground and set teeth to help cut materials that bi-metal saws will not cut.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.