Top 25 Best Drillspots

 

DrillSpot 10-24 x 78 Black Oxide Pan Head Phillips Machine Screw Pack of 5000

DrillSpot #10-24 x 7/8″ Black Oxide Pan Head Phillips Machine Screw, Pack of 5000

DrillSpot #10-24 x 7/8″ Black Oxide Pan Head Phillips Machine Screw, Pack of 5000 - Measures bolts and screws up to 7″ long (180mm). Measures bolts and screws up to 1″ diameter (22mm). Machine screw. Inch and metric, coarse and fine thread. Screw thread pitch gauge for metric (70 to 25mm) and inch (10 to 40 threads per inch).

 

DrillSpot M4-07 x 40mm Phillips DIN 965 Zinc Flat Head Machine Screw Pack of 1000

DrillSpot M4-0.7 x 40mm Phillips DIN 965 Zinc Flat Head Machine Screw, Pack of 1000

DrillSpot M4-0.7 x 40mm Phillips DIN 965 Zinc Flat Head Machine Screw, Pack of 1000 - Used in applications where the protrusion of the fastener about the bearing surface is unacceptable. Flat head has a countersunk flat head with a cone-shaped bearing surface. Zinc is a popular and economical plating and is a good choice for interior applications when working with acidic woods like red/white oak, or when the screw will be countersunk and plugged. Machine threads are used in pre-tapped hole or with a nut.

 

DrillSpot 4-40 x 14 Black Oxide Flat Head Phillips Machine Screw Pack of 10000

DrillSpot #4-40 x 1/4″ Black Oxide Flat Head Phillips Machine Screw, Pack of 10000

DrillSpot #4-40 x 1/4″ Black Oxide Flat Head Phillips Machine Screw, Pack of 10000 - Flat head has a countersunk flat head with a cone-shaped bearing surface. Black oxide, uniform in color, is perfect for exposed screw heads and provides enough corrosion protection to prevent rust. Machine threads are used in pre-tapped hole or with a nut. Used in applications where the protrusion of the fastener about the bearing surface is unacceptable.

 

DrillSpot FAB-LOK Drive Tool Holding Sleeve wSocket

DrillSpot FAB-LOK Drive Tool Holding Sleeve w/Socket

DrillSpot FAB-LOK Drive Tool Holding Sleeve w/Socket - Used for installing elco fablok fasteners. Includes fastener holder, drive socket and allen wrench.

 

DrillSpot 4-40 x 14 18-8 SS Undercut Flat Head Phillips Machine Screw Pack of 5000

DrillSpot #4-40 x 1/4″ 18-8 S/S Undercut Flat Head Phillips Machine Screw, Pack of 5000

DrillSpot #4-40 x 1/4″ 18-8 S/S Undercut Flat Head Phillips Machine Screw, Pack of 5000 - Used in applications where the protrusion of the fastener about the bearing surface is unacceptable. Machine threads are used in pre-tapped hole or with a nut. Flat head has a countersunk flat head with a cone-shaped bearing surface. Stainless steel provides the ultimate corrosion resistance for most woodworking projects.

 

DrillSpot 10 Black Oxide Finish Countersunk Finishing Washer Pack of 8000

DrillSpot #10 Black Oxide Finish Countersunk Finishing Washer, Pack of 8000

DrillSpot #10 Black Oxide Finish Countersunk Finishing Washer, Pack of 8000 - Countersunk washer. First snap hook with a 5,000 lb (22kn) gate load capacity from any angle. Sofstop shock absorber pack.

 

DrillSpot 516 18-8 Stainless Steel Flat Washer Pack of 1000

DrillSpot 5/16″ 18-8 Stainless Steel Flat Washer, Pack of 1000

DrillSpot 5/16″ 18-8 Stainless Steel Flat Washer, Pack of 1000 - Stainless steel material. Flat washers are used typically under the head of a bolt or a nut to distribute the forces applied when tightening.

 

DrillSpot 10-24 x 1 Black Oxide Flat Head Phillips Machine Screw Pack of 5000

DrillSpot #10-24 x 1″ Black Oxide Flat Head Phillips Machine Screw, Pack of 5000

DrillSpot #10-24 x 1″ Black Oxide Flat Head Phillips Machine Screw, Pack of 5000 - Machine threads are used in pre-tapped hole or with a nut. Black oxide, uniform in color, is perfect for exposed screw heads and provides enough corrosion protection to prevent rust. Flat head has a countersunk flat head with a cone-shaped bearing surface. Used in applications where the protrusion of the fastener about the bearing surface is unacceptable.

 

DrillSpot 8 Black Oxide Finish Countersunk Finishing Washer Pack of 10000

DrillSpot #8 Black Oxide Finish Countersunk Finishing Washer, Pack of 10000

DrillSpot #8 Black Oxide Finish Countersunk Finishing Washer, Pack of 10000 - Includes fastener holder, drive socket and allen wrench. Countersunk washer.

 

DrillSpot 516-18 x 1-14 Type A Regular Shoulder Thumb Screw Zinc Pack of 500

DrillSpot 5/16″-18 x 1-1/4″ Type A Regular Shoulder Thumb Screw, Zinc, Pack of 500

DrillSpot 5/16″-18 x 1-1/4″ Type A Regular Shoulder Thumb Screw, Zinc, Pack of 500 - Zinc plating, retards the corrosion rate in a normal atmosphere. Length is measured from under the head. Tighten and loosen with finger pressure-ideal where frequent disassembly occurs. All screws are fully threaded.

 

DrillSpot 6-18 x 1 Phillips Flat Head Wood Screw Zinc Pack of 6000

DrillSpot #6-18 x 1″ Phillips Flat Head Wood Screw, Zinc, Pack of 6000

DrillSpot #6-18 x 1″ Phillips Flat Head Wood Screw, Zinc, Pack of 6000 - Used in applications where the protrusion of the fastener above the bearing surface is unacceptable. Wood screws are threaded at least two-thirds of their length and have a sharp point to facilitate entry. To prevent splitting, we recommend that you drill a starter hole slightly smaller than the screw you’re installing use a countersink to create a recess for flat and oval head screws. Use a wood screw when you need more holding power than a nail can provide. The flat head has a countersunk flat head with a cone-shaped bearing surface. Zinc plating, retards the corrosion rate in a normal atmosphere.

 

DrillSpot 4-22 x 34 Phillips Flat Head Wood Screw Zinc Pack of 10000

DrillSpot #4-22 x 3/4″ Phillips Flat Head Wood Screw, Zinc, Pack of 10000

DrillSpot #4-22 x 3/4″ Phillips Flat Head Wood Screw, Zinc, Pack of 10000 - . Use a wood screw when you need more holding power than a nail can provide. Wood screws are threaded at least two-thirds of their length and have a sharp point to facilitate entry. The flat head has a countersunk flat head with a cone-shaped bearing surface. Used in applications where the protrusion of the fastener above the bearing surface is unacceptable. Zinc plating, retards the corrosion rate in a normal atmosphere. To prevent splitting, we recommend that you drill a starter hole slightly smaller than the screw you’re installing use a countersink to create a recess for flat and oval head screws.

 

DrillSpot 6-18 x 1-14 Phillips Flat Head Wood Screw Zinc Pack of 5000

DrillSpot #6-18 x 1-1/4″ Phillips Flat Head Wood Screw, Zinc, Pack of 5000

DrillSpot #6-18 x 1-1/4″ Phillips Flat Head Wood Screw, Zinc, Pack of 5000 - Wood screws are threaded at least two-thirds of their length and have a sharp point to facilitate entry. Used in applications where the protrusion of the fastener above the bearing surface is unacceptable. To prevent splitting, we recommend that you drill a starter hole slightly smaller than the screw you’re installing use a countersink to create a recess for flat and oval head screws. The flat head has a countersunk flat head with a cone-shaped bearing surface. Zinc plating, retards the corrosion rate in a normal atmosphere. Use a wood screw when you need more holding power than a nail can provide.

 

DrillSpot 8-32 x 2 Phillips Round Head Zinc Plated Machine Screw Pack of 2000

DrillSpot #8-32 x 2″ Phillips Round Head Zinc Plated Machine Screw, Pack of 2000

DrillSpot #8-32 x 2″ Phillips Round Head Zinc Plated Machine Screw, Pack of 2000 - It is sometimes preferred over pan heads for its smooth surface and appearance. Zinc is a popular and economical plating and is a good choice for interior applications when working with acidic woods like red/white oak, or when the screw will be countersunk and plugged. Machine threads are used in a pre-tapped hole with a nut. Round head has a semi-elliptical top surface and a flat bearing surface.

 

DrillSpot M4-07 x 35mm DIN 7985 Phillips Zinc Pan Head Machine Screw Pack of 1500

DrillSpot M4-0.7 x 35mm DIN 7985 Phillips Zinc Pan Head Machine Screw, Pack of 1500

DrillSpot M4-0.7 x 35mm DIN 7985 Phillips Zinc Pan Head Machine Screw, Pack of 1500 - M4-0. 7 x 35mm din 7985 phillips zinc pan head machine screw.

 

DrillSpot M6-10 x 16 DIN 7985 A2 SS 18-8 Pan Phil Machine Screw Pack of 700

DrillSpot M6-1.0 x 16 DIN 7985 A2 S/S (18-8) Pan Phil. Machine Screw, Pack of 700

DrillSpot M6-1.0 x 16 DIN 7985 A2 S/S (18-8) Pan Phil. Machine Screw, Pack of 700 - Inch and metric, coarse and fine thread. Drywall screw. Sheet metal screw. Machine screw. Measures bolts and screws up to 1″ diameter (22mm).

 

DrillSpot 14 Black Oxide Finish Internal Tooth Lock Washer Pack of 10000

DrillSpot 1/4″ Black Oxide Finish Internal Tooth Lock Washer, Pack of 10000

DrillSpot 1/4″ Black Oxide Finish Internal Tooth Lock Washer, Pack of 10000 - Internal tooth lock washers work best with small screw heads. Teeth lock into screw head or nut to prevent loosening. Use them to prevent snagging or scratching and where appearance warrants that the teeth be hidden. Black oxide finish provides enough corrosion protection to prevent rusting. .

 

DrillSpot 2 oz Tube Grey J-B Steelstik REG Two Part Reinforced Epoxy Putty Stick

DrillSpot 2 oz Tube Grey J-B Steelstik [REG] Two Part Reinforced Epoxy Putty Stick

DrillSpot 2 oz Tube Grey J-B Steelstik [REG] Two Part Reinforced Epoxy Putty Stick - Manufactured by jb weld. Drillspot ar4 arrow lock key blank.

 

DrillSpot AR4 Arrow Lock Key Blank

DrillSpot AR4 Arrow Lock Key Blank

DrillSpot AR4 Arrow Lock Key Blank - Drillspot ar4 arrow lock key blank. Machine screw.

 

DrillSpot 516-12 x 2-12 UnSlotted Indented Hex Washer Head Sheet Metal Screw Type AB Zinc Pack of 300

DrillSpot 5/16″-12 x 2-1/2″ UnSlotted Indented Hex Washer Head Sheet Metal Screw Type AB, Zinc, Pack of 300

DrillSpot 5/16″-12 x 2-1/2″ UnSlotted Indented Hex Washer Head Sheet Metal Screw Type AB, Zinc, Pack of 300 - 5/16″-12 x 2-1/2″ unslotted indented hex washer head sheet metal screw type ab, zinc.

 

DrillSpot 7-16 x 2 Phillips Bugle Head Coarse Thread Self Drilling Drywall Screw Black Phosphate Pack of 4000

DrillSpot #7-16 x 2″ Phillips Bugle Head Coarse Thread Self Drilling Drywall Screw, Black Phosphate, Pack of 4000

DrillSpot #7-16 x 2″ Phillips Bugle Head Coarse Thread Self Drilling Drywall Screw, Black Phosphate, Pack of 4000 - Drywall screw. Sheet metal screw. Inch and metric, coarse and fine thread. Measures bolts and screws up to 7″ long (180mm). Measures bolts and screws up to 1″ diameter (22mm).

 

DrillSpot 10-24 x 58 Black Oxide Flat Head Phillips Machine Screw Pack of 8000

DrillSpot #10-24 x 5/8″ Black Oxide Flat Head Phillips Machine Screw, Pack of 8000

DrillSpot #10-24 x 5/8″ Black Oxide Flat Head Phillips Machine Screw, Pack of 8000 - Black oxide, uniform in color, is perfect for exposed screw heads and provides enough corrosion protection to prevent rust. Machine threads are used in pre-tapped hole or with a nut. Flat head has a countersunk flat head with a cone-shaped bearing surface. . Used in applications where the protrusion of the fastener about the bearing surface is unacceptable.

 

DrillSpot 14-14 x 1-14 Phillips Pan Head Sheet Metal Screw Type AB 18-8 Stainless Steel Pack of 1000

DrillSpot 1/4″-14 x 1-1/4″ Phillips Pan Head Sheet Metal Screw Type AB, 18-8 Stainless Steel, Pack of 1000

DrillSpot 1/4″-14 x 1-1/4″ Phillips Pan Head Sheet Metal Screw Type AB, 18-8 Stainless Steel, Pack of 1000 - Measures bolts and screws up to 1″ diameter (22mm). Machine screw. Sheet metal screw. Sheet metal screw. Inch and metric, coarse and fine thread.

 

DrillSpot 14-20 x 1-12 Black Oxide Pan Head Phillips Machine Screw Pack of 1500

DrillSpot 1/4″-20 x 1-1/2″ Black Oxide Pan Head Phillips Machine Screw, Pack of 1500

DrillSpot 1/4″-20 x 1-1/2″ Black Oxide Pan Head Phillips Machine Screw, Pack of 1500 - Machine screw. Machine screw. Machine screw. Sheet metal screw. Sheet metal screw.

 

DrillSpot 12 x 2 x 0250 Thick Zinc Finish Extra Heavy Fender Washer

DrillSpot 1/2″ x 2″ x 0.250″ Thick Zinc Finish Extra Heavy Fender Washer

DrillSpot 1/2″ x 2″ x 0.250″ Thick Zinc Finish Extra Heavy Fender Washer - Self-drilling screw. Drillspot ar4 arrow lock key blank.