Top 25 Drive Impacts

 

Sunex 3504 3/8-Inch Drive Impact Wobble Extension Set, 4-Piece - It includes 4 sae pieces (in) 3, 5, 10, 15. This sunex 3/8 inch drive 4 piece wobble extension set includes the most common sizes used for automotive repair. It is fully guaranteed, and includes a heavy duty blow molded storage case. The wobble drive provides 15 degree offset in all directions, with a steel ball retainer on male end. It is made of cr-mo alloy steel for long life.

 

Sunex 5313 1″ Drive Impact Extension 13″ - &Nbsp when working in confined areas and you need that extra reach or length, this works great. Features and benefits forged from the finest chrome molybdenum alloy steel &ndash the best choice for strength and durability extension size 13&quot fully guaranteedno doubt, sunex tools offer one of the most complete and toughest impact socket lines around. &Nbsp this 1&quot drive impact extension is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.

 

GearWrench 80548N 3/8″ Drive Impact Universal Joint - Finish black phosphate drive tang size 3/8″. Gear wrench bit sockets. Patented bit holding principle internal dimple feature, forces bit surface to the opposite side for maximum retention.

 

DEWALT Tough Box 7PC SAE 1/2 Deep Drive Impact Socket Set - Laser etched markings for easier identification on black phosphate finishes. Oil rubbed black oxide coating for corrosion resistance. Directtorque technology helps prevent rounding of fasteners. Heat treated cr-440 steel for strength and durability. O-ring and retaining pin compatible for added job-site safety.

 

OEMTOOLS 25240 1/2 Inch Drive Impact Conversion Extension Set, 3-Piece - Drive socket. The oemtools 3 piece 1/2 to 3/8 inch drive impact extension adapter set is a specialty extension set is great for working in tight areas that need the power of a 1/2 in. Drive impact tool but only have space for a 3/8 in.

 

TEKTON 4912 1/4-Inch and 3/8-Inch Drive Impact Star Bit Socket Set, T10 – T60, Cr-V, 13-Sockets - These tools are designed to be used with impact drivers to free rusted and overtightened bolts. Set includes(6) 1/4 in. The tekton 1/4 in. And 3/8 in. Drive star sizes t40, t45, t47, t50, t55, t60(1) 3/8 in. High-strength chrome vanadium steel construction and precisely milled tips deliver premium performance with an exact fit in fastener head, eliminating extra play that could damage tool or strip fastener. Drive impact star bit set has the complete series of sizes from t10 to t60, including sizes commonly found on disc brake calipers. Drive (f) x 1/4 in. Compact storage rails save toolbox drawer space and are easy to carry along to the job. Drive (m) adapter(2) storage rails. Drive star sizes t10, t15, t20, t25, t27, t30(6) 3/8 in.

 

Sunex 3500 3/8-Inch Drive Impact Extension Set, 4-Piece - 7 pounds. 7 inches. Overall width, side to side -5. -Fully guaranteedincludes sizes 3″, 5″, 10″ and 15″. Dimensions overall height, top to bottom -1. 4 inches. Overall product weight -2. . -Comes in a heavy molded storage tray. Su3500 features -forged from the finest chrome molybdenum alloy steel, the best choice for strength and durability. Generic dimensions -4 piece 3/8” drive impact extension set.

 

BSPUJ2PI 2Pc 3/8″ & 1/2″ Drive Cr-Mo Ball Type Universal Joint Impact Socket Adapter Set by CTT - Drop forged, heat treated, chrome molybdenum steel with phosphate finishhigh quality ball type swiveluse for those hard to reach areas while working and repairing automobilessizes 3/8″ & 1/2″ drive.

 

Sunex International 2515 1/2″ Drive Impact Extension – 15″ Length - -radius corner design, to extend the life of fasteners. -Fully guaranteedno doubt, sunex tools offer one of the most complete and toughest impact socket lines around. Su2515 features -forged from the finest chrome molybdenum alloy steel, the best choice for strength and durability.   Also it features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. 3 inches. Overall width, side to side -1. Generic dimensions -1/2” drive impact socket extension 15”. 5 pounds.   This 1/2″ standard drive, extension impact socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Overall product weight -1. Dimensions overall height, top to bottom -1 inches. -Standard drive extension impact socket.

 

DEWALT 19PC SAE 1/2″Drive Impact Deep Socket Set - Heat treated cr-440 steel for strength and durability. Directtorque technology helps prevent rounding of fasteners. Laser etched markings for easier identification on black phosphate finishes. O-ring and retaining pin compatible for added job-site safety. Oil rubbed black oxide coating for corrosion resistance.

 

Powerbuilt 648002 1/2-Inch Drive Impact Driver Kit - For loosening frozen fasteners using a hammer. Meets or exceeds ansi standards lifetime warranty. Made to be the most reliable tools in the market today. Tool solutions for most all situations. Built to exceed tool standards. Includes two slotted and two phillips bits.

 

TEKTON 4899 3/4-Inch Drive Impact Socket Set, Inch, Cr-V, 6-Point, 3/4-Inch – 2-Inch, 21-Piece - 18 inch, 24-tooth, oval-head ratchet with quick-release drive tang locks onto sockets. High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off. Meets or exceeds ansi performance standards. High-performance chrome vanadium steel sockets can be used with impact wrenches. 18 inch sliding t head breaker bar loosens frozen fasteners.

 

Williams 6-4A 3/4 Drive Impact Deep, 3/4-Inch F x 1/2-Inch M - The snap-on jh williams 6-4a 3/4-inch female by 1/2-inch male impact adapter has an overall length of 7-inches, a 3/4-inch drive and a black industrial finish. It has been specially heat treated for impact use to provide long life, safety, and durability. The socket retention is through hole and pin and is suitable for use with pneumatic and electric impact wrenches.

 

DEWALT DWMT70775 3/8-Inch Square Drive Impact Wrench - The 11,000 rpm helps provide high power fastening, with a twin hammer mechanism. It operates at 1200 bpm (blows/minute) and has a 1/4-inch air inlet. It has shock resistant housing bumpers to help protect the housing, a composite body design, and ergonomic handle with rubber cushion grip, along with a bottom handle exhaust. This impact wrench also offers an adjustable power regulator. The dewalt dwmt70775 3/8″ square drive impact wrench features a maximum torque at 300 ft-lbs whichs helps to break free fasteners that are stubborn or stuck.

 

EPAuto 1/2″ Drive Impact Socket Extension Bar Set, Cr-V, 3 Pieces - Durability made from hardened treated chrome vanadium steel alloy (cr-v). Make in taiwan. Corrosion-retardant black phosphate coating. Locks onto drive tang.

 

SK Hand Tool 31160 Drive Impact Extension Set, 1/4-Inch, 3-Piece - Black coating for corrosion resistance. . A. S. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Suregrip drive design drives the side of the fastener, not the corner, to provide increased strength and avoid rounding of rusted or damaged fasteners. Made in the u. , Featuring the sk suregrip hex design, which drives the side of the hex, not the corner.

 

Sunex 3301 3/8-Inch Drive Impact Universal Joint - . This sunex 3/8 inch drive impact universal joint is made of cr-mo alloy steel for long life and is fully guaranteed. The design drives the side of the fastener instead of the corner which provides increased strength, but also avoids rounding of rusted or damaged fasteners. Forged from the finest chrome molybdenum alloy steel – the best choice for strength and durability with a radius corner design, to extend the life of fasteners.

 

Makita XWT06Z 18V LXT Lithium-Ion Cordless Square Drive Impact Wrench, 3/8-Inch - Rubberized soft grip handle provides increased comfort on the job. Variable speed (0-2,100 rpm & 0-3,200 ipm) for a wide range of fastening applications. Weighs only 34 lbs with battery (battery not included) for reduced operator fatigue. Makita-built 4-pole motor delivers 155 ftlbs of max torque. Compact and ergonomic design at only 6-1/8″ long.

 

Irwin 1837573 1/4″ Hex to 1/2″ Square Drive Impact Socket Adapter with 2″ Length - Forged socket body. 2″ overall length. Ball retention design for quick-change applications. 1/4″ quick-change hex shank designed to work with impact drivers & reduces slipping in drill chuck. 1/4″ quick-change hex shank x 1/2″ square drive.

 

Just Clips (JC50012) 1/2″ Drive Impact Wrench Anvil Retainer, (Pack of 12) - This kit is developed with the needs of the technician in mind. Kits are designed and manufactured in the united states. . The just clips snap ring kit is specifically designed for air and electric impact wrenches. Each kit contains 3 clips and 3 o-rings. Size 1/2 inch.

 

DEWALT 3/8″ Drive Impact Socket Deep 6PT 15/16 - O-ring and retaining pin compatible for added job-site safety. Heat treated cr-440 steel for strength and durability. Directtorque technology helps prevent rounding of fasteners. Laser etched markings for easier identification on black phosphate finishes. Oil rubbed black oxide coating for corrosion resistance.

 

TEKTON 2905 3/8-Inch Drive Manual Hand Impact Driver Set, 7-Piece - Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements. Drives included screwdriver bits or any 3/8 in drive impact socket. Forward and reverse drive direction. Comfortable handle with non-slip knurled grip. Instant impact force loosens rusted or frozen screws without damaging them.

 

Stanley Proto J7424S 1/2-Inch Drive Impact Socket, 3/4-Inch, 8 Point - Tight tolerances for snug fit on fastener. Impact sockets are used wherever powered drive tools are used to install or remove fasteners. Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls. Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude. Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners.

 

DEWALT 1/2″ Drive Impact Socket 6PT 24MM - Heat treated cr-440 steel for strength and durability. Laser etched markings for easier identification on black phosphate finishes. Directtorque technology helps prevent rounding of fasteners. Oil rubbed black oxide coating for corrosion resistance. O-ring and retaining pin compatible for added job-site safety.

 

TEKTON 4911 3/8-Inch Drive Impact Star Bit Socket Set, T40 – T60, Cr-V, 6-Sockets - These tools are designed to be used with impact drivers to free rusted and overtightened bolts. Set includes(6) 3/8 in. The tekton 3/8 in. High-strength chrome vanadium steel construction and precisely milled tips deliver premium performance with an exact fit in fastener head, eliminating extra play that could damage tool or strip fastener. Compact storage rail saves toolbox drawer space and is easy to carry along to the job. Drive star sizes t40, t45, t47, t50, t55, t60(1) storage rail. Drive impact star bit socket set has the complete series of sizes from t40 to t60, including sizes commonly found on disc brake calipers.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.