Top 25 Toolmakers Vises

 

VS-SLV3 3 -8 Toolmakers Screwless Vise

VS-SLV3 3 -/8″ Toolmakers Screwless Vise

VS-SLV3 3 -/8″ Toolmakers Screwless Vise - Up to 400 lbs. Base and stationary jaw are one solid piece. Pressure at 45 degree downward angle keeps work rigid. All surface hardened and precision-ground to +/-. 0002″. Quick adjustment is made by pulling pin and pushing sliding jaw forward, then tightening with an allen wrench.

 

Precision Toolmakers Vise 2-38 Jaw Width

Precision Toolmakers Vise 2-3/8″ Jaw Width

Precision Toolmakers Vise 2-3/8″ Jaw Width - Jaw width 2-3/8” jaw depth 1-1/4” jaw open (max opening) 3-3/8”. Quantity 1 setunit weight 775 lbsunit overall dimension (fully open)2-3/8″lx13″wx2-1/2″h. 2-3/8” toolmaker vise. Detachable replacement jaws. Has ground “v” way clamping slot and 3/8” hole in base.

 

HHIP 3900-2003 Ultra Precision Toolmakers Vise 3 Jaw Width Pack of 1

HHIP 3900-2003 Ultra Precision Toolmaker’s Vise, 3″ Jaw Width (Pack of 1)

HHIP 3900-2003 Ultra Precision Toolmaker’s Vise, 3″ Jaw Width (Pack of 1) - Vise bed scraped ways. The “no-rise” jaw construction exerts a continual downward pressure to the jaw, eliminating tilting and lifting. Vees in sliding jaws. Jaw can be opened and closed without unbolting from work surface. Hardened and precision ground, solid one piece construction.

 

3 Precision Toolmakers Vise 00002

3″ Precision Toolmakers Vise 0.0002

3″ Precision Toolmakers Vise 0.0002 - The hardness if 58-62 hcr. The tolerance is within 0. 005mm/0. . This precision toolmakers vise has a jaw depth of 3 inch, a jaw depth of 1-5/8 inch, a jaw opening of 4 inch, and a vise length of 7-5/8 inch. 0002 inch of parallelism, flatness, and squareness.

 

Fowler 52-466-333-0 2-12 x 3 x 7 Toolmaker Vise

Fowler 52-466-333-0, 2-1/2″ x 3″ x 7″ Toolmaker Vise

Fowler 52-466-333-0, 2-1/2″ x 3″ x 7″ Toolmaker Vise - Base and front jaw are one piece all steel construction and case hardened. Has ground “v” way in sliding jaw. Clamping slots are provided. Features all surfaces hardened and precision ground square and parallel within. Holes and locking set screw for adjustable positions. 0005″. Fowler’s high accuracy toolmaker vises make precision holding possible for inspection, precision jig boring, milling and grinding.

 

Grizzly H7541 Toolmakers Vise with V-Block

Grizzly H7541 Toolmaker’s Vise with V-Block

Grizzly H7541 Toolmaker’s Vise with V-Block - You’ll have a tough time finding a tool maker’s vise with greater precision than this one. Features include a 0 to 5 1/4″ capacity between the jaws, 2 15/16″ x 1 3/8″ jaw dimensions, full length clamping ledges and a stepped screw that pulls the moveable jaw down and in. Comes with an angle v-block with 60 minute vernier scale and a protective wooden case. . The moveable jaw has horizontal and vertical v-grooves for round stock and the no-handle design makes this vise ideal for any milling situation.

 

Screwless Toolmaker Vise 3 Tool Making Grinding Vise

Screwless Toolmaker Vise 3″ Tool Making Grinding Vise

Screwless Toolmaker Vise 3″ Tool Making Grinding Vise - Tool making precision grinding vise. Quantity 1 overall dimension 3”l x 7-1/2”w x 3”h weight 880 lbs. V-groove at movable jaw square and parallel within 0002″. Jaw width 3″ jaw opening 4″ jaw depth 1-3/8″ vise is ground flat. Jaw can be opened and closed without unbolting vise from work surface.

 

HHIP 3900-0067 2 Inch Toolmakers Vise

HHIP 3900-0067 2 Inch Toolmaker’s Vise

HHIP 3900-0067 2 Inch Toolmaker’s Vise - All surfaces are hardened and precision ground square and parallel to accuracy of ±0002″. Jaw opening 25″. Clamping slots are provided and jaws are easily replaced. Jaw width 2″ jaw depth 100″.

 

Röhm 370779 Type 736-20 PS-SV Alloy Tool Steel Precision Toolmakers Vise with Lockable Front Swiveling Axis 90mm Jaw Width 210mm Length Size 2

Röhm 370779 Type 736-20 PS-SV Alloy Tool Steel Precision Toolmakers Vise with Lockable Front Swiveling Axis, 90mm Jaw Width, 210mm Length, Size 2

Röhm 370779 Type 736-20 PS-SV Alloy Tool Steel Precision Toolmakers Vise with Lockable Front Swiveling Axis, 90mm Jaw Width, 210mm Length, Size 2 - Made out of alloyed tool steel, hardened and precision ground. Bearing pins and headed dowels hardened and ground with accuracy of 0001-millimeters. Precision toolmakers vise with lockable front swiveling axis. The clamping devise can be positively locked in every angular position. Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work.

 

HHIP 3900-0067 Precision Toolmakers Vise 2 Width x 1 Depth Jaw 25 Jaw Opening Pack of 1

HHIP 3900-0067 Precision Toolmaker’s Vise, 2″ Width x 1″ Depth Jaw, 2.5″ Jaw Opening (Pack of 1)

HHIP 3900-0067 Precision Toolmaker’s Vise, 2″ Width x 1″ Depth Jaw, 2.5″ Jaw Opening (Pack of 1) - 5-inches jaw opening. 2. Clamping slots are provided and jaws are easily replaced. Hhip precision toolmaker’s vise. All surfaces are hardened and precision ground square and parallel to accuracy of +/- 0002-inches. Jaw measures 2-inches width by 1-inches depth. Ground “v” way.

 

4 TOOLMAKERS VISE 3900-0068

4″ TOOLMAKER’S VISE (3900-0068)

4″ TOOLMAKER’S VISE (3900-0068) - ~ F is 40mm. ~ Square and parallel to an accuracy of +/-. ~ Ground “v” way. ~ G is 0-120mm. . ~ E is 42mm. ~ B is 98mm. 4″ toolmaker’s vise (3900-0068) ~ all surfaces are hardened (52-58 hrc) and precision ground. ~ Clamping slots are provided and jaws are easily replaced. ~ J is 12mm & l is 196mm. ~ H is 50mm. ~ I is an m8 screw. ~ C is 82mm. ~ A is 255mm. ~ D is 40mm. 0002″.

 

Röhm 1179515 Type 735-60 PL-S Micro Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment 45mm Jaw Width 110mm Length Size 2

Röhm 1179515 Type 735-60 PL-S Micro Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 45mm Jaw Width, 110mm Length, Size 2

Röhm 1179515 Type 735-60 PL-S Micro Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 45mm Jaw Width, 110mm Length, Size 2 - Clamping jaws adjustable in steps, lock in automatically. Röhm micro precision toolmakers vise with quick adjustment. Simple clamping and releasing with the inner hexagon key. Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work.

 

AccusizeTools - 4 Precision Toolmakers Vise Hardened and Ground 00002 0235-0312

AccusizeTools – 4” Precision Toolmakers Vise Hardened and Ground 0.0002”, #0235-0312

AccusizeTools – 4” Precision Toolmakers Vise Hardened and Ground 0.0002”, #0235-0312 - 4” x 0. 0002”, #0235-0312 jaw width 4” jaw opening 4-3/4” jaw depth 1-3/4” vise length 10-1/4” with v-grooved jaw hardened and ground square and parallel within 0. 0002”. 0002″ precision toolmakers vise hardened and ground 0.

 

Röhm 1111183 Type 735-50 PL-G Alloy Tool Steel Precision Toolmakers Vise 73mm Jaw Width 210mm Length Size 1

Röhm 1111183 Type 735-50 PL-G Alloy Tool Steel Precision Toolmakers Vise, 73mm Jaw Width, 210mm Length, Size 1

Röhm 1111183 Type 735-50 PL-G Alloy Tool Steel Precision Toolmakers Vise, 73mm Jaw Width, 210mm Length, Size 1 - Clamping and releasing with threaded spindle. . Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work. Röhm precision toolmakers vise is made out of alloyed tool steel, hardened and precision ground. Horizontal and vertical ground prism.

 

TTC Hi-Precision Toolmakers Screwless Vise - Model - PV-200 Jaw Width - 3 Jaw Opening - 3-34 Jaw Height - 1-38

TTC Hi-Precision Toolmakers Screwless Vise – Model – PV-200 Jaw Width – 3″ Jaw Opening – 3-3/4″ Jaw Height – 1-3/8″

TTC Hi-Precision Toolmakers Screwless Vise – Model – PV-200 Jaw Width – 3″ Jaw Opening – 3-3/4″ Jaw Height – 1-3/8″ - Precision ground to a mirror finish. Squareness and parallelism of the vise is approximately ±0002″ on critical sides. Hardened and stabilized. Overall height 2-1/2″. Overall length 7″.

 

Röhm 1111187 Type 735-70 PLF Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment In Accuracy To Gauge 100mm Jaw Width 245mm Length Size 2

Röhm 1111187 Type 735-70 PLF Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment In Accuracy To Gauge, 100mm Jaw Width, 245mm Length, Size 2

Röhm 1111187 Type 735-70 PLF Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment In Accuracy To Gauge, 100mm Jaw Width, 245mm Length, Size 2 - Röhm precision toolmakers vise with quick adjustment in accuracy to gauge. Clamping and releasing with locking screws on the top side. Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work. Clamping jaws adjustable in steps, lock in automatically.

 

Röhm 1111182 Type 735-50 PL-G Alloy Tool Steel Precision Toolmakers Vise 60mm Jaw Width 110mm Length Size 0

Röhm 1111182 Type 735-50 PL-G Alloy Tool Steel Precision Toolmakers Vise, 60mm Jaw Width, 110mm Length, Size 0

Röhm 1111182 Type 735-50 PL-G Alloy Tool Steel Precision Toolmakers Vise, 60mm Jaw Width, 110mm Length, Size 0 - Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work. Horizontal and vertical ground prism. Clamping and releasing with threaded spindle. Röhm precision toolmakers vise is made out of alloyed tool steel, hardened and precision ground.

 

2-12 Precision Toolmakers Vise

2-1/2″ Precision Toolmakers Vise

2-1/2″ Precision Toolmakers Vise - Hardness is in 58-62 hcr and tolerance is within 0. 0002″ of parallelism, flatness and squareness. 005mm/0. This precision toolmakers vise is a high carbon steel with jaw width of 2-1/2″, jaw depth of 1-3/8″ and jaw opening of 3-1/2″ and vise length of 7-1/4″.

 

Röhm 1179516 Type 735-65 PL-S Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment 70mm Jaw Width 160mm Length Size 1

Röhm 1179516 Type 735-65 PL-S Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 70mm Jaw Width, 160mm Length, Size 1

Röhm 1179516 Type 735-65 PL-S Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 70mm Jaw Width, 160mm Length, Size 1 - Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work. Clamping jaws adjustable in steps, lock in automatically. Simple clamping and releasing with the inner hexagon key. Röhm precision toolmakers vise with quick adjustment.

 

HHIP 3900-2013 3 Ultra Precision Toolmakers Vise

HHIP 3900-2013 3″ Ultra Precision Toolmaker’s Vise

HHIP 3900-2013 3″ Ultra Precision Toolmaker’s Vise - Jaw can be opened and closed without unbolting the vise from the work surface. Hardened and precision ground, hrc5560 degree. Tolerance is within 00012″(parallelism) and 0002″ (squareness). Jaw width is 73mm. The “no-rise” jaw construction exerts a continual downward pressure to the jaw, eliminating tilting & lifting.

 

TTC Precision Toolmakers Vise - Model - 466-000 TM Jaw Width - 2-38 Jaw Opening - 2-316

TTC Precision Toolmakers Vise – Model – 466-000 TM Jaw Width – 2-3/8″ Jaw Opening – 2-3/16″

TTC Precision Toolmakers Vise – Model – 466-000 TM Jaw Width – 2-3/8″ Jaw Opening – 2-3/16″ - Ground “v” way. Hardened and ground dovetail slide eliminates “lift” and ensures consistent accuracy. Overall length 6-1/4″. Overall height 1-3/4″. Base and front jaw are of one piece all steel construction.

 

3 Screwless Toolmaker Grinding Ground Vise 0002 Steel Tool Making Vise

3” Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise

3” Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise - Jaw width 3″jaw opening 4″jaw depth 1-3/8″ angular center channel provides extra jaw capacity. Quantity 1overall dimension 3”l x 7-1/2”w x 3”hweight 880 lbs. Tool making precision grinding vise. Vise is ground flatsquare and parallel within 0002″v-groove at movable jaw. Jaw can be opened and closed without unbolting vise from work surface.

 

Röhm 1179518 Type 735-65 PL-S Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment 120mm Jaw Width 280mm Length Size 3

Röhm 1179518 Type 735-65 PL-S Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 120mm Jaw Width, 280mm Length, Size 3

Röhm 1179518 Type 735-65 PL-S Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 120mm Jaw Width, 280mm Length, Size 3 - Simple clamping and releasing with the inner hexagon key. Röhm precision toolmakers vise with quick adjustment. Clamping jaws adjustable in steps, lock in automatically. Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work.

 

Röhm 1179514 Type 735-60 PL-S Micro Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment 34mm Jaw Width 75mm Length Size 1

Röhm 1179514 Type 735-60 PL-S Micro Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 34mm Jaw Width, 75mm Length, Size 1

Röhm 1179514 Type 735-60 PL-S Micro Alloy Tool Steel Precision Toolmakers Vise with Quick Adjustment, 34mm Jaw Width, 75mm Length, Size 1 - . Clamping jaws adjustable in steps, lock in automatically. Used on grinding, milling and engraving machines, jig boring machines, for measurement and inspection work. Simple clamping and releasing with the inner hexagon key. Röhm micro precision toolmakers vise with quick adjustment.

 

HHIP 3900-2012 2 Ultra Precision Toolmakers Vise

HHIP 3900-2012 2″ Ultra Precision Toolmaker’s Vise

HHIP 3900-2012 2″ Ultra Precision Toolmaker’s Vise - Jaw width is 50mm. The “no-rise” jaw construction exerts a continual downward pressure to the jaw, eliminating tilting & lifting. Tolerance is within 00012″(parallelism) and 0002″ (squareness). Jaw can be opened and closed without unbolting the vise from the work surface. Hardened and precision ground, hrc5560 degree.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.